• Journal of Internet of Things and Convergence
• /
• v.9 no.2
• /
• pp.55-60
• /
• 2023

Recently, demand for cloud computing has increased and remote access due to home work and external work has increased. In addition, a new security paradigm is required in the current situation where the need to be vigilant against not only external attacker access but also internal access such as internal employee access to work increases and various attack techniques are sophisticated. As a result, the network security model applying Zero-Trust, which has the core principle of doubting everything and not trusting it, began to attract attention in the security industry. Zero Trust Security monitors all networks, requires authentication in order to be granted access, and increases security by granting minimum access rights to access requesters. In this paper, we explain zero trust and zero trust architecture, and propose a new cloud security system for strengthening access control that overcomes the limitations of existing security systems using zero trust and blockchain and can be used by various companies.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.11
• /
• pp.61-71
• /
• 2009

Vehicle license plate is the only way to check the registrated information of a vehicle. Many works have been devoted to the vision system of recognizing the license plate, which has been widely used to control an illegal parking. However, it is difficult to correctly segment characters on the license plate since an illumination is affected by a weather change and a neighboring obstacles. This paper proposes a robust method of segmenting the character of the license plate on irregular illumination condition. The proposed method enhance the contrast of license plate images using the Chi-Square probability density function. For segmenting characters on the license plate, binary images with the high quality are gained by applying the adaptive threshold. Preprocessing and labeling algorithm are used to eliminate noises existing during the whole segmentation process. Finally, profiling method is applied to segment characters on license plate from binary images.

• Journal of IKEEE
• /
• v.26 no.1
• /
• pp.1-9
• /
• 2022

In order to secure the reliability of the power system and to increase the penetration level of distributed energy resources (DERs), requirements such as IEEE 1547 have been revised to strengthen the grid connection standards for DER. This paper proposes a control scheme for smart inverter functions based on IEEE 1547-2018 that satisfy these standards, and introduces a power HILS-based test platform built for verification of smart inverter. Among the smart inverter functions, Volt-var and Frequency-watt allow the curve to be set from the upper level to comply with the interoperability and operation time of enable signals for each function are controlled by references from the upper level. According to the requirement, Volt-var and Frequency-watt are performed via power HILS platform and verified through the measurement results that all of the specified type tests were satisfied.

• Journal of the Korean Society for information Management
• /
• v.39 no.1
• /
• pp.69-90
• /
• 2022

As basic data that can systematically support and evaluate R&D activities as well as set current and future research directions by grasping specific trends in domestic academic research, I sought efficient ways to assign standardized subject categories (control keywords) to individual journal papers. To this end, I conducted various experiments on major factors affecting the performance of automatic classification, focusing on feature selection techniques, for the purpose of automatically allocating the classification categories on the National Research Foundation of Korea's Academic Research Classification Scheme to domestic journal papers. As a result, the automatic classification of domestic journal papers, which are imbalanced datasets of the real environment, showed that a fairly good level of performance can be expected using more simple classifiers, feature selection techniques, and relatively small training sets.

• Nuclear Engineering and Technology
• /
• v.55 no.4
• /
• pp.1439-1447
• /
• 2023

The fuel cycle characteristics of the IVG.1M reactor were studied within the framework of the research reactor conversion program to modernize the IVG.1M reactor. Optimum use of the nuclear fuel and reactor was achieved through routine methods which included partial fuel reloading combined with scheduled maintenance operations. Since, the additional problem in planning the fuel cycle of the IVG.1M reactor was the poisoning of the beryllium parts of the core, reflector, and control system. An assessment of the residual power and composition of spent fuel is necessary for the selection and justification of the technology for its subsequent management. Computational studies were performed using the MCNP6.1 program and the neutronics model of the IVG.1M reactor. The proposed scheme of annual partial fuel reloading allows for maintaining a high reactor reactivity margin, stabilizing it within 2-4 β_eff for 20 years, and achieving a burnup of 9.9-10.8 MW × day/kg U in the steady state mode of fuel reloading. Spent fuel immediately after unloading from the reactor can be placed in a transport packaging cask for shipping or safely stored in dry storage at the research reactor site.

• Nuclear Engineering and Technology
• /
• v.55 no.7
• /
• pp.2578-2590
• /
• 2023

In this work, a 24-month two-batch fuel management strategy for the APR1400 using LEU + has been investigated, where enrichments of 5.9 and 5.2 w/o are utilized in lieu of the conventional 4-5 w/o UO₂ fuel. In addition, an Accident Tolerant Fuel (ATF) clad based on the swaging technology is applied to APR1400 fuel assemblies. In this special ATF clad design, both outer and inner SS316 layers protect the conventional zircaloy clad. Erbia (Er₂O₃) is introduced as a burnable absorber with two-fold goals to lower the critical boron concentration in the long-cycle LEU + loaded core as well as to handle the LEU + fuel in the existing front-end fuel facilities without renewing the license. Two types of fuel assemblies with different loading of gadolinia (Gd₂O₃) are considered to control both the reactivity and the core radial power distribution. The erbia burnable absorber is uniformly admixed with UO₂ in all fuel pins except for the gadolinia-bearing ones. In this study, two core designs were devised with different erbia loading, and core performance and safety parameters were evaluated for each case in comparison with a core design without any burnable absorbers. The core analysis was done using the two-step method. First, cross-sections are generated by the SERPENT 2 Monte Carlo code, and the 3-D neutronic analysis is performed with an in-house multi-physics nodal code KANT.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.1A
• /
• pp.51-58
• /
• 2008

A cable element happens to vibration easily rather than other elements because a cable element has few rotational stiffness. Dynamic motion of stay cable is distinguished from vibration by wind and/or rain and excitation by support movement. Mostly a stay cable is vibrated by wind and/or rain except that when natural periods coincide between stiffening girder and stay cable. It happens to deterioration of serviceability and durability by vortex shedding, rainy-wind induced vibration, and galloping. Additional damping generated by installation of cable damper is well known good scheme against above phenomena. Researchers have lack of effort to develop the recommendations even if cable stayed bridges are designed and constructed in Korea. Therefore, development of the domestic recommendations should be achieved as soon as possible. This study suggests the consistent and systematic recommendations on vibration controlling design of stay cable by installation of damper. It gives readers two important methodologies that one evaluates required damping ratio, the other determines installing point considering efficiency.

• Journal of People, Plants, and Environment
• /
• v.22 no.2
• /
• pp.127-143
• /
• 2019

This study investigates the color stimuli of two varieties of foliage plants by extracting electroencephalogram, electrocardiogram and physiology activity data from 30 participants in their 50s or older. Changes in the physiological activity of subjects against six color stimuli were examined. The stimulus to real green plants 'Silver Queen' was set as the control group, and was compared with other groups including the stimulus to real 'Angel' plants and four stimuli to artificial colors (two color images and color schemes of the same green and red plants). Compared to the five groups, the relative theta power spectrum (RT) and the ratio of alpha to high beta (RAHB) increased in the subjects exposed to real green plants. This result demonstrates that the green plant ('Silver Queen') increases the stability, relaxation, and internal concentration of subjects in a proper state of awakening. The result of this experiment showed a statistically significant difference in the level of RT when subjects were exposed to the groups of real green and red plants. This finding indicates that the green plant increases internal concentration more than the red plant. RT and the relative low beta power spectrum (RLB) in the groups of natural colors were higher than the groups of artificial colors when subjects focused their mind on the two types of real plants. However, the level of relative mid beta power spectrum (RMB), ratio of SMR to theta (RST), ratio of mid beta to theta (RMT), relative high beta power spectrum (RHB), and spectral edge frequency 95% were higher when subjects were exposed to the photos and colors scheme of plants than when they were exposed to real plants. The subjects experienced more "comfortable" emotions when they were looking at plants with green colors. Overall, it is recommended to use the natural colors of real plants in places where which stability and relaxation are required. On the contrary, the artificial colors of plants such as their photos and color schemes are useful in places where a high level of concentration is required in a short period of time.

• International conference on construction engineering and project management
• /
• 2020.12a
• /
• pp.463-481
• /
• 2020

Cutter suction dredgers (CSDs) are widely used in various dredging constructions such as channel excavation, wharf construction, and reef construction. During a CSD construction, the main operation is to control the swing speed of cutter to keep the slurry concentration in a proper range. However, the slurry concentration cannot be monitored in real-time, i.e., there is a "time-lag effect" in the log of slurry concentration, making it difficult for operators to make the optimal decision on controlling. Concerning this issue, a solution scheme that using real-time monitored indicators to predict current slurry concentration is proposed in this research. The characteristics of the CSD monitoring data are first studied, and a set of preprocessing methods are presented. Then we put forward the concept of "index class" to select the important indices. Finally, an ensemble learning algorithm is set up to fit the relationship between the slurry concentration and the indices of the index classes. In the experiment, log data over seven days of a practical dredging construction is collected. For comparison, the Deep Neural Network (DNN), Long Short Time Memory (LSTM), Support Vector Machine (SVM), Random Forest (RF), Gradient Boosting Decision Tree (GBDT), and the Bayesian Ridge algorithm are tried. The results show that our method has the best performance with an R² of 0.886 and a mean square error (MSE) of 5.538. This research provides an effective way for real-time predicting the slurry concentration of CSDs and can help to improve the stationarity and production efficiency of dredging construction.

• Journal of Internet of Things and Convergence
• /
• v.10 no.1
• /
• pp.47-52
• /
• 2024

The efficiency and quality of healthcare services rely heavily on the secure protection and transparent management of individuals' medical information, which is becoming increasingly important in the digital age. To address this issue, we propose a distributed identity management (DID) and electronic medical record (EMR) integration system based on Hyperledger Indy, which aims to ensure the ownership of medical information to individuals and increase the accessibility and utilization of medical information. The system will allow individuals to manage their own medical information and share it transparently when necessary, which will improve the efficiency of healthcare services. In addition, the system will securely protect and transparently manage medical information, increasing the transparency of medical services and strengthening individuals' control over their medical information. Thus, the system will contribute significantly to improving the quality of medical services, protecting individuals' medical information, and improving the efficiency of medical services.