• 한국생산제조학회지
• /
• 제5권4호
• /
• pp.18-25
• /
• 1996

In this study, we have developed the stereolithography system that supports the development of a products. This paper presents the development of the stereolithography system. The system is composed of hardware, software and control part. The software converts a STL file to NC data and displays the monitoring figure in control part. The hardware part deals with structure of machine. The most important theme in this paper is LG-SLCAM software. This software can generate NC data and scanning condition data from a STL file semiautimatically. On the basis of three diensional shapes, it makes data for support structure from STL file. The effectiveness of using out stereolithography system is confirmed by processes of good development.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.66.2-66
• /
• 2001

Double-effect absorption chiller-heaters have been widely installed in large buildings and are also becoming popular in mid-sized commercial buildings. While much emphasis is Put on designing energy saving and efficient chiller-heaters, careful attention must also be given to the design of control systems for these devices. Currently, these devices are controlled by their own built-in controllers, such as relay based sequence controller or microprocessor based controller. But, because large buildings require multiple chiller-heaters, a centralized supervision and control system is necessary for the efficient monitoring, control, and operations management of these devices We have developed man-machine interface software that allows the implementation of such a system. This system will support increased reliability, more efficient building management operations, and reduced ...

• 대한의용생체공학회:의공학회지
• /
• 제20권1호
• /
• pp.81-90
• /
• 1999

본 연구에서는 수술이나 환자 모니터링시 무의식 상태 환자의 뇌혈류량에 대한 정확한 모니터링으로 뇌허혈 현상을 방지하기 위하여 2채널 양극성 아날로그 EEG를 디지털로 처리하여 다양한 뇌파 관련 파라미터를 추출하여 실시간으로 한 화면에 디스플레이하고, 또한 임상의사들이 사용하기 편리한 뇌파 감시 소프트웨어를 개발하고자 하였다. 이를 위하여 EEG-데이터를 FFT 연산 후 CSA 및 DSA의 형태로 표현하며, 기타 다양한 뇌파관련 파라미터를 추출한 후 한 화면에서 실시간으로 디스플레이하고, 사용 편리성도 극대화하도록 프로그램하였다. 프로그램은 개발 도중에 여러 번의 동물실험 및 임상실험을 통하여 개선 보완되었으며, EEG, CSA, DSA 및 알파비, 퍼센트 델타 스펙트럼 모서리 주파수, 전체 파워, 전체 파워의 차 등의 주요 뇌파 파라미터들을 한 화면에서 관찰하게 되어 환자 상태의 종합적인 간찰이 가능하며, 나중에 저장된 EEG 파일을 재검토할 수 있다. 또한 CSA, DSA, 스펙트럼 모서리 주파수 및 전체 파워는 원하는 부분에서 표본을 취해 화면 위쪽에 최대 3개까지 붙여 놓고 동시에 비교할 수 있으므로 환자 상태의 객관적인 비교가 가능하고, 환자상태, 응급처치 등에 대한 기록사항을 입력할 수 있어서 저장된 EEG 파일의 검토시 이들 event로 즉시 찾아가는 기능이 있으며, 그 외에도 앞 뒤 점프 이동 기능, 이득 조절 기능, 윈도우 환경에서의 파일관리 기능 등을 갖추고 있고, 프로그램이 윈도우 환경에서 개발되어 마우스에 의해 대부분의 동작이 이루어진다. 개발된 프로그램을 이용한 대학병원의 임상실험결과, 환자상태의 변화에 매우 민감하게 반응하고, 또한 임상의사들이 이용하기에도 매우 편리하다는 평가를 받았다.

• 전력전자학회논문지
• /
• 제4권6호
• /
• pp.570-578
• /
• 1999

이 논문은 인터넷이나 정보통신망을 이용하여 멀리 떨어져 잇는 기기를 제어하거나 감시하는 원격 제어 시스템을 개발하는 것을 목표로 하고 있다. 이 때 원격 제어용 프로토콜로는 SNMP(Simple Network Manatement Protocol)를 사용하였고, 지역적으로 멀리 떨어져 있는 기기에 대한 실시간 제어 및 감시를 위하여 자바(Java) 환경의 소프트웨어를 구축하였다. 도한 이 논문에서는 네트워크 기기와 응용 기기 사이의 인터페이스 컨트롤러를 제안하여 대부분의 기기에서도 이 원격 제어 시스템을 사용할 수 있다는 가능성을 보였다.

• Journal of Positioning, Navigation, and Timing
• /
• 제10권2호
• /
• pp.145-151
• /
• 2021

According to the Korea Augmentation Satellite System (KASS) system milestone, Site Acceptance Test (SAT) has three steps test until the end of the project. SAT#1 is the first time of SAT steps and verify the KASS Reference Station (KRS) and Sub System (S/S) for the monitoring and controllable. After the equipment and software were installed at the Mission Control Center (MCC) with Central Monitoring and Control Simulator (CMS) for the SAT#1, the 1:1 test was progressed when the KRS and S/S are ready to test. SAT#1 has a 10 steps test case and it was progressed each KRS sites. The test was finished throughout the real-time monitoring and the data collection including the data analysis all of the 7 KRS sites. Finally SAT#1 was completed on December 2020 with successfully.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅲ
• /
• pp.1589-1592
• /
• 2003

Existing system management software solutions show limitations in time and space, as well as problems such as uncertain error messages, and also difficulty providing swift assistance or real time emergency support. Therefore, a wireless remote control system has been designed and implemented in this thesis, which is capable of managing and monitoring remote systems using mobile communication devices (Mobile Phone, PDA, Smart Phone, Webpad) for instantaneous control. The implemented real time wireless remote control system provides remote server management functions, error or event message (unctions, log record functions, authentication function via mobile devices.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.251-254
• /
• 2003

In this paper have embodied a TCP/IP based small embedded web server and proposed the technical method for monitoring the real-time system states and remote controlling system using HTTP about manipulator joint angle. This also uses TCP/IP, which is the general protocol. and it is made of software, not of the TCP/IP stack with hardware chip. Then we attach the simulating results about the manipulator's input/output via web browser.

• International journal of advanced smart convergence
• /
• 제8권3호
• /
• pp.69-77
• /
• 2019

Today, most of elevators have an emergency call facility for emergency situations. However, if the network installed in the elevator is also out of power, it cannot be used for the elevator remote monitoring and management. So, we develop an integrated and unified emergency call system, which can transmit not only telephone call but also data signals using PSTN(Public Switched Telephone Network) in order to remote monitoring and management of elevators, even though a power outage occurs. The proposed integrated emergency call system to process multiple data such as voice and operational information is a multi-channel board system which is composed of an emergency phone signal processing module and an operational information processing module in the control box of elevator. In addition, the RMS(remote management server) systems based on the Web consist of a dial-up server and a remote monitoring server where manages the elevator's operating information, status records, and operational faults received via the proposed integrated and unified emergency call system in real time. So even if there's a catastrophic emergency, the proposed RMS systems shall ensure and maintain the safety of passengers inside the elevator. Also, remote control of the elevator by this system should be more efficient and secure. In near future, all elevator emergency call system need to support multifunctional capabilities to transmit operational data as well as phone calls for the safety of passengers. In addition, for safer elevators, it is necessary to improve them more efficiently by combining them with high-tech technologies such as the Internet of Things and artificial intelligence.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.671-673
• /
• 1999

In order to cope with the occurrence of abnormal operation, rotatory condition monitoring system for guide roller of finishing train in wire rolling has been developed. In this study, proximity sensor and its holding devices that could overcome severe in-situ measurement conditions was designed and MMI software using C++ was programmed. Performance of the developed system turned out to be good enough as results of in-line test for POSCO #3 wire rolling mill. It is expected to contribute to prevent the cobble and the grade-down of products caused by the abnornormal operation of guide rollers.

• 한국컴퓨터정보학회논문지
• /
• 제21권10호
• /
• pp.125-133
• /
• 2016

In this paper, we propose a real-time fault monitoring and dual system design of the countdown time-generating system, which is the main component of the mission control system. The countdown time-generating system produces a countdown signal that is distributed to mission control system devices. The stability of the countdown signal is essential for the main launch-related devices because they perform reserved functions based on the countdown time information received from the countdown time-generating system. Therefore, a reliable and fault-tolerant design is required for the countdown time-generating system. To ensure system reliability, component devices should be redundant and faults should be monitored in real time to manage the device changeover from Active mode to Standby mode upon fault detection. In addition, designing different methods for mode changeover based on fault classification is necessary for appropriate changeover. This study presents a real-time fault monitoring and changeover system, which is based on the dual system design of countdown time-generating devices, as well as experiment on real-time fault monitoring and changeover based on fault inputs.