• 한국전산유체공학회:학술대회논문집
• /
• 2000.05a
• /
• pp.21-26
• /
• 2000

Pressure-flow control characteristics of a commercially available cerebrospinal flow(CSF) control shunt valve was tested using fluid-solid interaction analysis. Pre-stress of the valve diaphragm(membrane) was computed for proper valve opening. The results were ir good agreements with the valve specification listed in the commercially available CSF control valve. The results of the study can be effectively used to design variety of CSF control shunt valves.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.486-490
• /
• 2004

Programmable logic controller (PLC) is widely used in manufacturing system or process control. This paper presents the design of a 32-bit microprocessor for a sequence control using an Application Specification Integrated Circuit (ASIC). The 32-bit microprocessor was designed by a VHDL with top down method; the program memory was separated from the data memory for high speed execution of 274 specified sequence instructions. Therefore it was possible that sequence instructions could be operated at the same time during the instruction fetch cycle. And in order to reduce the instruction decoding time and the interface time of the data memory interface, an instruction code size was implemented by 32-bits. And the real time debugging as single step run, break point run was implemented. Pulse instruction, step controller, master controllers, BIN and BCD type arithmetic instructions, barrel shit instructions were implemented for many used in PLC system. The designed microprocessor was synthesized by the S1L50000 series which contains 70,000 gates with 0.65um technology of SEIKO EPSON. Finally, the benchmark was performed to show that designed 32-bit microprocessor has better performance than Q4A PLC of Mitsubishi Corporation.

• Corrosion Science and Technology
• /
• v.9 no.3
• /
• pp.105-108
• /
• 2010

The product specification of the Continuous Hot Dip Galvanizing Line (CGL) changes and varies constantly with different customers' requirements, especially in the zinc coating weight which is from 30 to 150 g/$m^2$ on each side. Since the coating weight of zinc changes often, it is very important to reduce time spent in the transfer of target values changed for low production cost and yield loss. The No.2 CGL in China Steel Corporation (CSC) has improved the control of the air knife which is designed by Siemens VAI. CSC proposed an experiment design which is an $L_9(3^4)$ orthogonal array to find the relations between zinc coating weight and the process parameters, such as the line speed, air pressure, gap of air knife and air knife position. A non-linear regression formula was derived from the experimental results and applied in the mathematical model. A new air knife feedforward control system, which is coupled with the regression formula, the air knife control system and the process computer, is implemented into the line. The practical plant operation results have been presented to show the transfer time is obviously shortened while zinc coating weight target changing and the product rejected ratio caused by zinc coating weight out of specification is significantly reduced from 0.5% to 0.15 %.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.8
• /
• pp.1353-1362
• /
• 2003

This paper considers a simultaneous optimization problem of structure and control systems. The problem is generally formulated as a non-convex optimization problem for the design parameters of mechanical structure and controller. Therefore, it is not easy to obtain the global solutions for practical problems. In this paper, we parameterize all design parameters of the mechanical structure such that the parameters work in the control system as decentralized static output feedback gains. Using this parameterization, we have formulated a simultaneous optimization problem in which the design specification is defined by the Η$_2$and Η$\_$$\infty$/ norms of the closed loop transfer function. So as to lead to a convex problem we approximate the nonlinear terms of design parameters to the linear terms. Then, we propose a convex optimization method that is based on linear matrix inequality (LMI). Using this method, we can surely obtain suboptimal solution for the design specification. A numerical example is given to illustrate the effectiveness of the proposed method.

• Magazine of RCR
• /
• v.5 no.3
• /
• pp.20-26
• /
• 2010

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.53.5-53
• /
• 2002

1. Introduction 2. PCI Local Bus Specification Abstract 3. Design Embedded PCI Local Bus 4. Simulation Results 5. DAS Application Design Methodology 6. Conclusion

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1999.04a
• /
• pp.295-295
• /
• 1999

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.5
• /
• pp.888-896
• /
• 2011

A white smoke hand grenade, KM8 is used to make smoke screen in order to provide visual field interceptions or signals. The grenade fails when its time to emit smoke is longer than the specified emission time so that the smoke concentration becomes lighter. This paper considered failure in smoke emission time, and evaluated its storage lifetime. The main objective of this paper is to modify the present specification limits of smoke emission time for the efficient process control in manufacturing, through analyzing effect of its specification change on the storage lifetime, based on the lifetime evaluation results. Accelerated degradation test was performed and then failure in smoke emission time was reproduced from the test. And estimated storage lifetimes from the accelerated test results was compared to evaluated lifetimes of grenades using the ASRP data. Past process testing results of the grenade in manufacturing were analyzed in this paper. Then, each storage lifetime for the specifications, ${\pm}3$ and ${\pm}5$ in seconds, extended from the current specification in manufacturing were estimated using the past testing results, and compared to one another.

• Journal of Korea Society of Industrial Information Systems
• /
• v.5 no.4
• /
• pp.16-21
• /
• 2000

Role Based Access Control(RBAC) reduces the cost of administering access control policies as well as making the process less error-prone. Administration tool is most important component in the concept of RBAC. The administration tool for the RBAC security system must be maintain the integrity of user-role and role-role relationships in the RBAC Database. Therefor, it is required set functions, properties defining integrity of database. When it will be designed security systems which is applying RBAC policy on the Linux(server system environments, this paper defines integrity of database for user-role and role-role relationships, and we propose formal specification of operation in order to manage these relationships. The proposed formal specification leads to the consistency requirements for the RBAC database which are defined as a set of relationship. Also, this paper can easily derive the implementation of the RBAC administration tool by formal specification of operations. It leads us tn the minimal set for a more efficiently implementation of administration tool.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.55 no.5
• /
• pp.216-219
• /
• 2006

This paper presents an XML based standard specification of remote control protocol for home appliances. In the framework level, the XML protocol provides a useful bridge between services and platforms. The proposed protocol has been implemented into a personal video recorder for remote recording service. The results imply the potential of global standards for remote control by its minimum overhead in network and processor. The proposed XML is designated RCXML in this paper.