• Proceedings of the KSR Conference
• /
• 2000.05a
• /
• pp.360-367
• /
• 2000

This paper is intended to provide a method to design control software for the TCMS, train control and monitoring system. The TCMS with this control software will be applied KOREA Standard EMU. The control software is designed by SCADE Case tool to concern safety and reliability. The function for the EMU is implemented in software easily programmed, using a functional block, graphic programming language. The control software has modular design and each module is tested with SCADE simulator. This time we focus a Driving control module, including brake control module, and present a design method and a simulation method for that module.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.259-266
• /
• 1999

This paper is intended to provide a method to design control software for the TCMS, train control and monitoring system. The TCMS with this control software will be applied KOREA Standard EMU. The control software is designed by SCADE Case tool to concern safety and reliability. The function for the EMU is implemented in software easily programmed, using a functional block, graphic programming language. The control software has modular design and each module is tested with SCADE simulator. This time we focus a door control module, present a design method and a simulation method for that module.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.302-309
• /
• 1999

This paper is intended to provide a method to design control software fur the TCMS, train control and monitoring system. The TCMS with this control software will be applied KOREA Standard EMU. The control software is designed by SCADE Case tool to concern safety and reliability. The function for the EMU is implemented in software easily programmed, using a functional block, graphic programming language. the control software has modular design and each module is tested with SCADE simulator. This time we focus a HVAC(heater, ventilation and air conditioner controller) control module, present a design method and a simulation method for that module.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.1
• /
• pp.1196-1204
• /
• 2001

In this paper, a new architecture of operating software associated with the component-based method is proposed. The proposed architecture comprises 문 execution module and a decision-making module. In order to make effective development and maintenance, the execution module is divided into three components. The components are referred to as Symbol, Gateway, and Control, respectively: The symbol component is for the GUI environments and the standard interfaces; the gateway component is for the network communication and the structure of asynchronous processes; the control component is for the asynchronous processing and machine setting or operations. In order to verify the proposed architecture, and off-line version of operating software is made, and its steps are as follows; I) Make virtual execution modules for the manufacturing devices such as dual-arm robot, handling robot, CNC, and sensor; ii) Make decision-making module; iii) Integrate the modules and GUI using a well-known development tools such as Microsofts Visual Basic; iv) Execute the overall operating software to validate the proposed architecture. The proposed software architecture in this paper has the advantages such as independent development of each module, easy development of network communication, and distributed processing of resources, and so on.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1257-1263
• /
• 2008

Recent advances in embedded system technology have brought more dependence on automating train control. While much efforts have been reported to improve electronic hardware's safety, not so much systematic approaches to evaluate software's safety, especially for the vital software running on board train controllers. In this paper, we have developed a software testing tool to evaluate train control system software safety, expecially "Metric Analysis" module. We have reviewed requirements in the international standards and surveyed available tools in the market. From this, we identified the S/W metric analysis module is required for software evaluation. So we have developed S/W metric analysis module for railway signaling systems.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.03a
• /
• pp.116-119
• /
• 1998

Abstract-In paper, an operation support software for combustion control of refuse incineration plant is developed using fuzzy model and genetic algorithm. It has two major modules which are simulation module and optimal operation module. In simulation module modelling is performed to obtain fuzzy model of the refuse incineration plant and obtained fuzzy model predicts outputs of the plant when inputs are given. This module can be used to obtain control strategy, and train and enhance operators' skill by simulating the plant. And in optimal operation module, genetic algorithm searches and finds out optimal control inputs over all possible solutions in respect to desired outputs. In order to testify proposed operation support software, computer simulation was carried out.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.4
• /
• pp.280-288
• /
• 2009

In this paper, we developed new time information recording module of VSI (VLBI Standard Interface) format by analyzing the Mark5B recorder control and operation software with 1Gbps speed, which is able to record the weak signal of space radio source, through the Korean VLBI Network (KVN). The control and operation software of high-speed recorder consists of 2 kinds of software, which is that it can operate RAID control board by controlling large capacity HDD drive and the network control and operation. Especially, core software in high-speed recorder is able to output the results after performing and analyzing the input command. Through the analysis of control and operation software, new time information recording module, which is needed to process the observed data for correlation, is developed. New developed time information recording module can record the time information together after checking the interrupt of 1PPS(Pulse Per Second) input signal when the observed data will be recorded. To verify the normal operation of the developed time information recording module, we performed the real observation test and confirmed the effectiveness of developed software through analyzing the recorded observation data.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.12
• /
• pp.1264-1270
• /
• 2004

In this paper, a standard robot design methodology is suggested and a software architecture for modular robot is introduced. The robot is modularized by several functions, and the module is produced according to a standard proposal. Each module requires standard interface for communicate in distributed environments. Software architecture was developed to support distributed component environment, and application development support tools are developed for user convenience. Many robot softwares are developed in a library form so that, they are being used widely robot application software development. Also a device driver was developed for the mostly used sensor and actuator. It is verified that the modular robot can be applied in various fields through guide, errand and guard scenario.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.5
• /
• pp.54-62
• /
• 1999

This paper describes the design and implementation of a PC(personal computer) based open architecture machine tool controller. The hardware of open architecture CNC has generally a motion control board on a PC for controlling a servo motor. But this paper describes open architecture hardware that consists of a PC, a counter board a DAC board and a DIO board only. This makes it easy to generate CNC software module in a hardware-independent way. The proposed open architecture CNC software runs on the MS-Windows NT. The paper describes a method of con-trolling servo motors using a real-time timer of MS-Windows NT and a commercial real-time operating system on the MS-Windows. NT. An open and reconfigurable software module is made up of an object and an API(application programming interface). Using the object and the API a new CNC system can be quickly configured to control dif-ferent machine tools. The proposed open architecture CNC system is applied to 4-axis lettering center.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.61-66
• /
• 1992

In this paper, a method for implementing software for the control system with dual structure in processor module is proposed and implemented to enhance its reliability. In this implementation the multi-tasking function which is provided by a real-time operating system is applied. The overall softwre is divided into five tasks and is performed in each of the dual processor module, independently. By this, the processor module with dual structure can achieve a control objective and fault diagnostics effectively. An experimental result shows that the backup processor module can be substituted for the primary processor module immediately when it happens to fail, because data relating the failure information are exchanged continuously done via shared memories.