• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.360-367
• /
• 2000

This paper is intended to provide a method to design control software for the TCMS, train control and monitoring system. The TCMS with this control software will be applied KOREA Standard EMU. The control software is designed by SCADE Case tool to concern safety and reliability. The function for the EMU is implemented in software easily programmed, using a functional block, graphic programming language. The control software has modular design and each module is tested with SCADE simulator. This time we focus a Driving control module, including brake control module, and present a design method and a simulation method for that module.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.259-266
• /
• 1999

This paper is intended to provide a method to design control software for the TCMS, train control and monitoring system. The TCMS with this control software will be applied KOREA Standard EMU. The control software is designed by SCADE Case tool to concern safety and reliability. The function for the EMU is implemented in software easily programmed, using a functional block, graphic programming language. The control software has modular design and each module is tested with SCADE simulator. This time we focus a door control module, present a design method and a simulation method for that module.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.302-309
• /
• 1999

This paper is intended to provide a method to design control software fur the TCMS, train control and monitoring system. The TCMS with this control software will be applied KOREA Standard EMU. The control software is designed by SCADE Case tool to concern safety and reliability. The function for the EMU is implemented in software easily programmed, using a functional block, graphic programming language. the control software has modular design and each module is tested with SCADE simulator. This time we focus a HVAC(heater, ventilation and air conditioner controller) control module, present a design method and a simulation method for that module.

• 제어로봇시스템학회논문지
• /
• 제7권1호
• /
• pp.1196-1204
• /
• 2001

In this paper, a new architecture of operating software associated with the component-based method is proposed. The proposed architecture comprises 문 execution module and a decision-making module. In order to make effective development and maintenance, the execution module is divided into three components. The components are referred to as Symbol, Gateway, and Control, respectively: The symbol component is for the GUI environments and the standard interfaces; the gateway component is for the network communication and the structure of asynchronous processes; the control component is for the asynchronous processing and machine setting or operations. In order to verify the proposed architecture, and off-line version of operating software is made, and its steps are as follows; I) Make virtual execution modules for the manufacturing devices such as dual-arm robot, handling robot, CNC, and sensor; ii) Make decision-making module; iii) Integrate the modules and GUI using a well-known development tools such as Microsofts Visual Basic; iv) Execute the overall operating software to validate the proposed architecture. The proposed software architecture in this paper has the advantages such as independent development of each module, easy development of network communication, and distributed processing of resources, and so on.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1257-1263
• /
• 2008

Recent advances in embedded system technology have brought more dependence on automating train control. While much efforts have been reported to improve electronic hardware's safety, not so much systematic approaches to evaluate software's safety, especially for the vital software running on board train controllers. In this paper, we have developed a software testing tool to evaluate train control system software safety, expecially "Metric Analysis" module. We have reviewed requirements in the international standards and surveyed available tools in the market. From this, we identified the S/W metric analysis module is required for software evaluation. So we have developed S/W metric analysis module for railway signaling systems.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 춘계학술대회 학술발표 논문집
• /
• pp.116-119
• /
• 1998

Abstract-In paper, an operation support software for combustion control of refuse incineration plant is developed using fuzzy model and genetic algorithm. It has two major modules which are simulation module and optimal operation module. In simulation module modelling is performed to obtain fuzzy model of the refuse incineration plant and obtained fuzzy model predicts outputs of the plant when inputs are given. This module can be used to obtain control strategy, and train and enhance operators' skill by simulating the plant. And in optimal operation module, genetic algorithm searches and finds out optimal control inputs over all possible solutions in respect to desired outputs. In order to testify proposed operation support software, computer simulation was carried out.

• 융합신호처리학회논문지
• /
• 제10권4호
• /
• pp.280-288
• /
• 2009

본 논문에서는 한국우주전파관측망(Korean VLBI Network; KVN)을 통하여 천체의 미약한 우주전파를 고속으로 기록하는 Mark5B 고속기록기 시스템의 제어운용 소프트웨어를 분석하고 VSI(VLBI Standard Interface) 형식의 시각정보를 기록할 수 있는 소프트웨어를 개발하였다. 고속기록기 시스템의 제어운용 소프트웨어는 대용량 하드디스크를 제어할 수 있는 RAID 보드를 구동하는 소프트웨어와 네트워크를 통한 제어운용을 할 수 있다. 핵심 제어 소프트웨어가 시스템에서 구동하고 있으면 네트워크로 입력된 명령을 해석하고 실행 후 결과를 다시 네트워크를 통해 출력하도록 구성되어 있다. 이러한 소프트웨어 분석을 통하여 기록된 관측데이터를 상관처리하기 위해 필요한 시각정보를 함께 기록할 수 있는 소프트웨어를 본 논문에서 개발하였다. 개발된 소프트웨어는 데이터를 기록할 때 입력되는 1PPS 신호의 인터럽트를 확인한 후 데이터 기록과 함께 기록시각정보도 함께 데이터 기록시간동안 기록한다. 개발한 소프트웨어의 정상동작을 확인하기 위해 실제 관측을 수행하였으며, 기록한 데이터의 분석을 통하여 그 유효성을 확인하였다.

• 제어로봇시스템학회논문지
• /
• 제10권12호
• /
• pp.1264-1270
• /
• 2004

In this paper, a standard robot design methodology is suggested and a software architecture for modular robot is introduced. The robot is modularized by several functions, and the module is produced according to a standard proposal. Each module requires standard interface for communicate in distributed environments. Software architecture was developed to support distributed component environment, and application development support tools are developed for user convenience. Many robot softwares are developed in a library form so that, they are being used widely robot application software development. Also a device driver was developed for the mostly used sensor and actuator. It is verified that the modular robot can be applied in various fields through guide, errand and guard scenario.

• 한국생산제조학회지
• /
• 제8권5호
• /
• pp.54-62
• /
• 1999

This paper describes the design and implementation of a PC(personal computer) based open architecture machine tool controller. The hardware of open architecture CNC has generally a motion control board on a PC for controlling a servo motor. But this paper describes open architecture hardware that consists of a PC, a counter board a DAC board and a DIO board only. This makes it easy to generate CNC software module in a hardware-independent way. The proposed open architecture CNC software runs on the MS-Windows NT. The paper describes a method of con-trolling servo motors using a real-time timer of MS-Windows NT and a commercial real-time operating system on the MS-Windows. NT. An open and reconfigurable software module is made up of an object and an API(application programming interface). Using the object and the API a new CNC system can be quickly configured to control dif-ferent machine tools. The proposed open architecture CNC system is applied to 4-axis lettering center.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.61-66
• /
• 1992

In this paper, a method for implementing software for the control system with dual structure in processor module is proposed and implemented to enhance its reliability. In this implementation the multi-tasking function which is provided by a real-time operating system is applied. The overall softwre is divided into five tasks and is performed in each of the dual processor module, independently. By this, the processor module with dual structure can achieve a control objective and fault diagnostics effectively. An experimental result shows that the backup processor module can be substituted for the primary processor module immediately when it happens to fail, because data relating the failure information are exchanged continuously done via shared memories.