• 한국지리정보학회지
• /
• 제9권3호
• /
• pp.58-66
• /
• 2006

환경 민감도 정보는 해양 유출유 사고시 효율적이고 신속한 방제 업무를 위한 유용한 정보이다. 유출유에 관련된 환경 민감도 정보의 종류가 다양하기 때문에 방제 현장에서 환경 민감도 정보에 대한 효율적인 접근과 활용 방안이 요구된다. 현장에서의 방제 업무 효율성을 높이기 위해서 환경 민감도 지도를 수치지도로 구축하고, GIS 기술을 이용한 전용 프로그램 개발이 필요하다. 본 연구에서는 경기만과 여수 지역을 대상으로 방제 업무 지원을 위한 환경 민감도 정보를 GIS 데이터베이스로 구축하고 GIS 프로그램을 개발하였다. 이를 위해 IMO/IPIECA의 환경 민감도 작성 지침과 해양경찰청의 방제 정보 지도 작성을 위한 정보 수집 지침에 따라 환경 민감도 정보를 수집하고, 환경 민감도 정보 표시 기호의 정의 및 업무 분석을 통한 방제 업무 지원 요소를 추출하였다. 향후 본 프로그램은 전 해역에 대한 환경 민감도 지도 전용 프로그램으로 활용될 수 있으며, 국가 차원의 해양 오염 방제 업무 지원 시스템 구축의 요소 기술로서의 가능성을 기대할 수 있다.

• Advances in Traditional Medicine
• /
• 제7권2호
• /
• pp.205-210
• /
• 2007

The objectives of the study were (1) To evaluate the safety and tolerability of Damtab. (2) To characterize hypoglycemic effect of Damtab, if any. (3) To evaluate insulin sensitivity effect of Damtab, if any. Hypoglycemic effect of Damtab (700 mg and 1,400 mg) were examined. Gliclazide (80 mg) was used as an active control. Placebo was used as control. Breakfast was given, half an hour before dosing whereas lunch, snacks and dinner were given at 6, 10 and 14 h post dose. An oral glucose tolerance test was conducted to calculate the insulin sensitivity index from the values of glucose and insulin during oral glucose tolerance test. Both giclazide 80 mg and Damtab 1,400 mg significantly lowered plasma glucose level up to 6 h. Insulin sensitivity index of Damtab (1,400 mg) was found to be similar to that of placebo. A significant increase in insulin level at 1 h post dose of Damtab (1,400 mg) was observed. Damtab 700 mg shows placebo like effect whereas Damtab 1,400 mg possesses hypoglycemic effect.

• 한국항해학회지
• /
• 제4권1호
• /
• pp.19-30
• /
• 1980

The usual procedure for the optimal design of ship's steering system is to minimize a chosen quadratic performance index, which isdetermined from the view point of economic run. However, the optimal control synthesized in such a straightforward fashion is unsatisfactory because ship's parameters differ from their nominal values due to uncertainties and errors in measurement and/or simplifications in mathematical modelling, and/or the variation of the ship's loading condition. In an attempt to resolve this difficulty, this paper presents a method for designing a low sensitive optimal steering system in a way as to minimize not only given performance index but also the sensitivity of the performance index and trajectory sensitivity. It is also shown that the optimal control so obtained will result in a system whose performance index and transient response are low sensitive to small varation in ship's time constant.

• 전기학회논문지
• /
• 제61권7호
• /
• pp.944-949
• /
• 2012

As modern power systems become large and complicated, the automated voltage and reactive power control system is required in most developed countries due to the recent amazing progress of computer net works and information thechnology. So far the voltage control has been depend on human operator in korean power system. This paper presents an intelligent voltage control system based on sensitivity analysis and artificial intelligence technology. Detailed state space modeling technique is discussed and a new performance index is proposed to speed up the searching performance of the expert system. As the searching strategy is very important factor of the speed of expert system the least first search algorithm is applied using this performance index. The intelligent voltage control system is applied to the Jeju power system. As a result, case studies showed a promissing application of the intelligent voltage control system.

• 제어로봇시스템학회논문지
• /
• 제6권4호
• /
• pp.239-246
• /
• 2000

This paper investigates optimal locations of piezoelectric actuators and sensors on a thin plate. To locate actuators and sensors properly is important in controlling modal vibrations well. A piezoelectric sensitivity index is introduced to select optimal locations for vibration control of each mode. The sensitivity expresses the efficiency of actuating and sensing modal forces according to locations of a piezoelectric material on a plate. The piezoelectric sensitivities for two types of plate, an all-clamped plate, and a free-free plate, are derived theoretically and are verified experimentally. Also, its usefulness Is experimentally shown to control vibration of the all-clamped plate with piezoelectric materials.

• 한국지능시스템학회논문지
• /
• 제21권3호
• /
• pp.359-364
• /
• 2011

본 연구는 감성 공학과 인공 지능 알고리즘의 하나인 퍼지 추론을 이용하여 LED 색온도 제어시스템의 체계적인 제어를 위한 퍼지 추론 기반 LED 감성 조명 시스템을 개발하고자 한다. 감성공학 영역에서 하나의 형용사 언어로 표현되는 감성과 색상과의 관계를 고려하여 감성언어를 결정하고, 인간의 뇌에서 나오는 뇌파의 파장과 색온도와의 관계를 고려하여 수업과목의 종류를 결정한다. 결정된 감성언어와 수업과목의 종류를 이용하여 RGB LED의 색온도를 조정한다. 더불어 GPS(Global Positioning System)로 위도와 경도의 정보를 이용하여 실시간으로 태양의 고도를 산출하고, 온도 및 습도센서의 정보를 이용하여 불쾌지수를 산출한다. 결과로 나온 태양의 고도와 불쾌지수의 변화에 따라 LED 조명시스템의 White LED의 조도와 RGBLED의 색온도를 조정한다. 개발된 LED 감성조명 시스템은 상황에 알맞은 분위기를 연출함으로써 학습능력과 업무능력의 효율 향상 등을 이끌어 낼 수 있을 것이다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.736-742
• /
• 2008

This paper proposes new searching algorithm for the optimal PD gains of flexible rotor supported by active magnetic bearings. Under the assumption of linearized bearing parameters with respect to PD gains, the performance index in quadratic form is defined and steepest descent method is adopted for determining local minimum. Moreover, the eigenpair sensitivity concept is utilized to evaluate the sensitivity of performance index. To evaluate the effectiveness of suggested algorithm, the finite element model is constructed and its reduced model is retained in modal domain. Given starting gains, the optimal gains are successfully found and the control performance is demonstrated by simulation to show the efficiency of the proposed method.

• 제어로봇시스템학회논문지
• /
• 제14권11호
• /
• pp.1174-1179
• /
• 2008

Many modeling and calibration methods have been developed to analyze and design the biological wastewater treatment process. For the systematic use of activated sludge model (ASM) in a real treatment process, a most important step in this usage is a calibration which can find a key parameter set of ASM, which depends on the microorganism communities and the process conditions of the plants. In this paper, a standardized calibration protocol of the ASM model is developed. First, a weighted effluent quality index(WEQI) is suggested far a calibration protocol. Second, the most sensitive parameter set is determined by a sensitive analysis based on WEQI and then a parameter optimization method are used for a systematic calibration of key parameters. The proposed method is applied to a calibration problems of the single carbon removal process. The results of the sensitivity analysis and parameter estimation based on a WEQI shows a quite reasonable parameter set and precisely estimated parameters, which can improve the quality and the efficiency of the modeling and the prediction of ASM model. Moreover, it can be used for a calibration scheme of other biological processes, such as sequence batch reactor, anaerobic digestion process with a dedicated methodology.

• 전기학회논문지
• /
• 제63권10호
• /
• pp.1455-1460
• /
• 2014

Wind turbine generators were designed on general regulations of wind condition. At real situations, it could be different from the design conditions. There are many control methods and definitions of transient region, because an efficient wind turbine generator control logic is the important matter in generator performance and annual energy production at real conditions. In this document, the power generation sensitivity for wind speed and turbulence intensities was defined to know the sensitive transient region. Wind conditions are applied for the ranges of 7~10m/s mean wind speed and 14~20% turbulence intensity. The sensibility of HR-D86 wind generator was increased in transient region(8~10m/s) on power curve diagram through a torque control to a pitch control. And then GH-bladed simulations was performed for performance analysis of the torque mode switching in transient region on 2MW direct drive wind generator(HR-D86) which is designed IEC class II for onshore. Through the sensitivity and performance analysis, the sensitivity for real wind condition could be the performance index for an wind generator. And the torque mode switching in transient region can increase the mean power generation on HR-D86 wind turbine generator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.218-221
• /
• 1992

Recent years voltage collapse phenomenon have a great attention to power system engineers. As the system size increases the voltage problem shows a very complicated and the reactive power contol problem becomes more difficult. This paper gives an efficient methods for calculating voltage collapse proximity index based on the reactive power loss sensitivity and real power loss sensitivity. The system voltages are tightly associated with the system reactive power, so the proposed voltage collapse proximity index is very usefull for the system voltage control problems. Numerical examples showed a good and reliable results.