• Journal of the Korean Society of Industry Convergence
• /
• v.20 no.3
• /
• pp.233-243
• /
• 2017

This paper proposes a structure of direct-printed flexible tactile-sensor. These flexible tactile sensors are based on pressure-sensing materials that allow pressure to be measured according to resistance change that in turn results from changes in material size because of compressive force. The sensing material consists of a mixture of multi walled carbon nanotubes (MWCNTs) and TangoPlus, which gives it flexibility and elasticity. The tactile sensors used in this study were designed in the form of array structures composed of many lines so that single pressure points can be measured. To evaluate the performance of the flexible tactile sensor, we used specially designed signal-processing electronics and tactile sensors to experimentally verify the sensors' linearity. To test object grasp, tactile sensors were attached to the surface of the fingers of grippers with three degrees of freedom to measure the pressure changes that occur during object grasp. The results of these experiments indicate that the flexible tactile sensor-based robotic gripper can grasp objects and hold them in a stable manner.

• Management Science and Financial Engineering
• /
• v.10 no.2
• /
• pp.1-28
• /
• 2004

The integrated supply chain of business partners for e-Commerce in cyber space is defined as Logistics Chain if the cooperative activities are logistics-related. Logistics Chain could be managed effectively and efficiently by cooperative technologies of logistics chain execution. In this paper, we propose a routing and scheduling algorithm based on the Tabu search by adding geographical information into existing constraint for pick-up and delivery process to minimize service time and cost in logistics chain. And, we also consider an uncertainty processing for the tracing of moving object to control pick-up and delivery vehicles based on GPS/GIS/ITS. Uncertainty processing is required to minimize amount of telecommunication and database on vehicles tracing. Finally, we describe the Logistics Chain Execution (LCE) system to perform plan and control activities for postal logistics chain. To evaluate practical effects of the routing and scheduling system, we perform a pretest for the performance of the tabu search algorithm. And then we compare our result with the result of the pick-up and delivery routing plan generated manually by postmen.

• Proceedings of KOSOMES biannual meeting
• /
• 2003.11a
• /
• pp.53-57
• /
• 2003

The last goof if the study is to develop a law cost and a readily available Virtual Reality (VR) based Ship Handling Simulator using Personal Computer. This paper mainly describes procedures and methods to control the dynamic motions if the 3D ship object with maneuvering coefficients in a virtual navigation world The creation if virtual navigation world, the mathematical background q a ship control, and the construction of the system are also discussed.

• Journal of Korea Multimedia Society
• /
• v.9 no.4
• /
• pp.490-504
• /
• 2006

It needs to control each objects on various platform and transmit multimedia data to multiple receivers which are for developing a multimedia service with multimedia live streaming in a distributed environment. In this paper, we present a DLS (Distributed Live Streaming) package which support l:N multimedia live streaming in a distributed environment. Also, it has extended RMI which is a distributed object technology and JMF using multimedia transmission/processing. A java-based DLS package has been designed to separate a transmission and a control for more efficient distributed processing. It is possible to apply in development of multimedia service supported 1:N transmission and runned independently to any platform.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.197-200
• /
• 2007

Edge representing the boundary between two regions with the large brightness difference in image includes diverse information about object. Therefore, this information has been utilized in fields such as image segmentation and object recognition. There are many kinds of edge in according to duration time and the amplitude of brightness variation, and edge is generally detected through the differential. Recently, in fields of image processing and computer vision, edge detection methods have been proposed to use in specific applications. Hence, in this paper the wavelet function for improved edge detection properties was proposed and detected line-edge components of images and its performance was proven through simulations.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.6
• /
• pp.89-97
• /
• 2004

An object to reflect or emit light is captured by imaging system as distorted image due to various distortion. It is called image restoration that estimates original object by removing distortion. There are two categories in image restoration method. One is a deterministic method and the other is a stochastic method. In this paper, image restoration using Minimum Fisher Information(MFI), derived from B. Roy Frieden is proposed. In MFI restoration, experimental results to be made according to noise control parameter were investigated. And cross entropy(Kullback-Leibler entropy) was used as a standard measure of restoration accuracy, It is confirmed that restoration results using MFI have various roughness according to noise control parameter.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.4
• /
• pp.350-356
• /
• 2004

This paper presents a farce manipulability analysis of multi-legged walking robots, which calculates force or acceleration workspace attainable from joint torque limits of each leg. Based on the observation that the kinematic structure of the multi-legged walking robots is basically the same as that of multiple cooperating robots, we derive the proposed method of analyzing the force manipulability of walking robot. The force acting on the object in multiple cooperating robot systems is taken as reaction force from ground to each robot foot in multi-legged walking robots, which is converted to the force of the body of walking robot by the nature of the reaction force. Note that each joint torque in multiple cooperating robot systems is transformed to the workspace of force or acceleration of the object manipulated by the robots in task space through the Jacobian matrix and grasp matrix. Assuming the torque limits are given in infinite norm-sense, the resultant dynamic manipulability is derived as a polytope. The validity of proposed method is verified by several examples, and the proposed method is believed to be useful for the optimal posture planning and gait planning of walking robots.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.758-763
• /
• 2003

This paper describes the development of a 6-axis robot's finger force/moment sensor, which measures forces Fx, Fy, Fz, and moments Mx, My, Mz simultaneously, for making a robot's gripper. In order to safely grasp and unknown object using the robot's gripper, it should measure the force in the gripping direction and the force in the gravity direction, and perform the force control using the measured forces. Thus, the robot's gripper should be composed of 6-axis robot's finger force/moment sensor that can measure forces Fx, Fy, Fz, and moments Mx, My, Mz simultaneously. In this paper, the 6-axis robot's finger force/moment sensor for measuring forces Fx, Fy, Fz, and moments Mx, My, Mz simultaneously was newly modeled using several parallel-plate beams, designed, and fabricated. The characteristic test of made sensor was performed. Also, Robot's gripper with the 6-axis robot's finger force/moment sensor for the characteristic test of force control was manufactured, and the characteristic test for grasping an unknown object was performed using it.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.9
• /
• pp.868-874
• /
• 2007

This paper proposes an efficient partial matching system and representation by using a region-based method for 2D image, and we applied to an extraction of the ROI(Region of Interest) according to its matching score. The matching templates consist of the global pattern and the local one. The global pattern can make it by using region-based relation between center region and its rest regions in an object. And, the local pattern can be obtained appling to the same method as global, except relation between objects. As the templates can be normalized, we use this templates for extraction of ROI with invariant to size and position. And, our system operates only one try to match, due to normalizing of region size. To use our system for searching and examining if it's the ROI by evaluating the matching function, at first, we are searching to find candidate regions with the global template. Then, we try to find the ROI among the candidates, and it works this time by using the local template. We experimented to the binary and the color image respectively, they showed that the proposed system can be used efficiently for representing of the template and the useful applications, such as partially retrievals of 2D image.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.4
• /
• pp.428-436
• /
• 2014

This paper proposes a statistical regression method for classifying pillars and vehicles in parking area using a single ultrasonic sensor. There are three types of information provided by the ultrasonic sensor: TOF, the peak and the width of a pulse, from which 67 different features are extracted through segmentation and data preprocessing. The classification using the multiple SVM and the multinomial logistic regression are applied to the set of extracted features, and has achieved the accuracy of 85% and 89.67%, respectively, over a set of real-world data. The experimental result proves that the proposed feature extraction and classification scheme is applicable to the object classification using an ultrasonic sensor.