• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.236-242
• /
• 1996

The purpose of this paper is to study the tension control in a web transport system. Direct self-tuning regulator method was applied to tension controller and variable-gain PID control algorithm was applied to web speed controller. The designed controllers compensated for the time-varying parameters and tracked reference tension in process speed changing. The simulation shows that direct STR tension controller improves tension control performance in comparison with other controllers.

• International Journal of Ocean System Engineering
• /
• 제3권1호
• /
• pp.16-21
• /
• 2013

This paper presents a design of fuzzy PD depth controller for the autonomous underwater vehicle entitled KAUV-1. The vehicle is shaped like a torpedo with light weight and small size and used for marine exploration and monitoring. The KAUV-1 has a unique ducted propeller located at aft end with yawing actuation acting as a rudder. For depth control, the KAUV-1 uses a mass shifter mechanism to change its center of gravity, consequently, can control pitch angle and depth of the vehicle. A design of classical PD depth controller for the KAUV-1 was presented and analyzed. However, it has inherent drawback of gains, which is their values are fixed. Meanwhile, in different operation modes, vehicle dynamics might have different effects on the behavior of the vehicle. In this reason, control gains need to be appropriately changed according to vehicle operating states for better performance. This paper presents a self-tuning gain for depth controller using the fuzzy logic method which is based on the classical PD controller. The self-tuning gains are outputs of fuzzy logic blocks. The performance of the self-tuning gain controller is simulated using Matlab/Simulink and is compared with that of the classical PD controller.

• 한국융합학회논문지
• /
• 제4권4호
• /
• pp.31-40
• /
• 2013

PID auto-tuning controller was designed via fuzzy logic. Typical values such as error and error derivative feedbackwere changed as heuristic expressions, and they determine PID gain through fuzzy logic and defuzzification process. Fuzzy procedure and PID controller design were considered separately, and they are combined and analyzed. Obtained auto-tuning PID controller by Fuzzy Logic showed the ability for less than 3rd order plant control.

• 한국정밀공학회지
• /
• 제14권12호
• /
• pp.174-181
• /
• 1997

A proposed hybrid self-tuning control scheme for single rod hydraulic cylinder which has varying loads is presented here. An adaptive controller is developed for the system that use feedforward and P feedback control for simultaneous parameter identification and tracking control. Through experimental results, the performance comparison of the hybrid self-tuning controller with a constant gain P contro- ller clearly shows its superior ability in handling load changes in quiescent states.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 B
• /
• pp.775-777
• /
• 1998

The Ziegler-Nichols parameter tuning has been widely known as a fairly heuristic method to good determine setting of PID controllers, for a wide range of common industrial processes. We extract process knowledge required for rule base controller through tuning experiment and simulation study, such as set point weighting and normalised gain and dead time of process. In this paper, we presents a rule base PID controller by extracted process knowledge and the modified Ziegler-Nichols tuning. Computer simulation are provided demonstrate the feasibility of this approach.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.210-212
• /
• 2006

This paper presents Hybrid PI(HBPI) controller of IPMSM drive using fuzzy adaptive mechanism control. In general, PI controller in computer numerically controlled machine process fixed gain. They may perform well under some operating conditions, but not all. To increase the robustness, fixed gain PI controller, HBPI controller proposes a new method based self tuning PI controller. HBPI controller is developed to minimize overshoot and settling time following sudden parameter changes such as speed, load torque, inertia, rotor resistance and self inductance. The results on a speed controller of IPMSM are presented to show the effectiveness of the proposed gain tuner. And this controller is better than the fixed gains one in terms of robustness, even under great variations of operating conditions and load disturbance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.231-232
• /
• 2007

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1986년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 17-18 Oct. 1986
• /
• pp.95-96
• /
• 1986

시스템을 입력과 출력값 만으로 제어하고자 할 경우에는, 플랜트의 파라메타를 추정하면서 제어해 나가야 할 것이다. 이러한 경우에는, 귀환제어나 최적제어 형태로는 여러가지 문제점이 발견되어서, 최근에 적응제어가 많이 연구되고 있다. 이에는 Gain-Scheduling 방법, Self-tuning regulator 방법 및 model reference adaptive control 방법이 있다. Gain-Scheduling 방법은 미지의 파라메타가 plant에 있을지라도, 이를 즉시 예측할 수 있을 경우 보조변수 추정을 통하여 이득을 조절하여 시스템을 안정시키는 것이고, self tuning regulator는 보조변수를 직접 조정하여 시스템을 제어한다. 또 model reference adaptive control 방법은 기준모델을 정하여, 이에 따라 관측기 등을 통하여, 플랜트의 파라메타를 추정 제어해 나가는 것이다. 이때 기준 모델의 출력과 플랜트 출력사이의 오차를 어떻게 할 것인가? 추정되는 파라메타와 오차와의 대수관계 및 차수 등, 그 한계 해석이 최근의 MRAC 설계연구에 큰 과제가 되어 왔다. 이에 본 연구에서는 신호합성 및 해석에 뛰어난 기능이 있는 Walsh 함수를 이용하여, 간단한 Micro computer의 도움으로, 오차 함수를 합성하고, 미지의 파라메타를 추정하여, 시스템의 adaptive filter설계에의 가능성에 대하여 연구하고자 한다. 또 이를 실제 예를 들어 고찰하였다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제50권3호
• /
• pp.107-113
• /
• 2001

This paper deals with speed control of DC servo motor using a PID controller with a gain tuning based on a Back-Propagation(BP) Learning Algorithm. Conventionally a PID controller has been used in the industrial control. But a PID controller should produce suitable parameters for each system. Also, variables of the PID controller should be changed according to environments, disturbances and loads. In this paper described by a experiment that contained a method using a PID controller with a gain tuning based on a Back-Propagation(BP) Learning Algorithm, we developed speed characteristics of a DC servo motor on variable loads. The parameters of the controller are determined by neural network performed on on-line system after training the neural network on off-line system.

• 한국생산제조학회지
• /
• 제24권3호
• /
• pp.327-333
• /
• 2015

As industrial robots come into wider use, their control techniques are being developed along with enhancements in their performance. Specially, the dynamic performance of a 6-axis articulated industrial robot is greatly changed according to the position and orientation of the robot. This means that the PI parameter tuning of the robot and orientation of the robot. This mconsidering the dynamic characteristics of robot mechanism. In this study, $LabView^{(R)}$ programming was applied to automatically conduct parameter scheduling for various robot motions. Using forward and inverse kinematics of RS2, we can divide the working envelope of RS2 into 24 subspaces. We then conduct the gain-tuning according to each subspace. Finally, we program the actual gain scheduling, in which the optimized gain-tuning for each subspace to be passed should be changed for various robot motions using $LabView^{(R)}$.