• 제목/요약/키워드: Control Allocation

검색결과 886건 처리시간 0.03초

SWMM 모형을 이용한 농업용 저수지 용수분배 모의 및 관개효율 평가 (Assessment of Water Distribution and Irrigation Efficiency in Agricultural Reservoirs using SWMM Model)

  • 신지현;남원호;방나경;김한중;안현욱;도종원;이광야
    • 한국농공학회논문집
    • /
    • 제62권3호
    • /
    • pp.1-13
    • /
    • 2020
  • The management of agricultural water can be divided into management of agricultural infrastructure and operation to determine the timing and quantity of water supply. The target of water management is classified as water-supply facilities, such as reservoirs, irrigation water supply, sluice gate control, and farmland. In the case of agricultural drought, there is a need for water supply capacity in reservoirs and for drought assessment in paddy fields that receive water from reservoirs. Therefore, it is necessary to analyze the water supply amount from intake capacity to irrigation canal network. The analysis of the irrigation canal network should be considered for efficient operation and planning concerning optimized irrigation and water allocation. In this study, we applied a hydraulic analysis model for agricultural irrigation networks by adding the functions of irrigation canal network analysis using the SWMM (Storm Water Management Model) module and actual irrigation water supply log data from May to August during 2015-2019 years in Sinsong reservoir. The irrigation satisfaction of ponding depth in paddy fields was analyzed through the ratio of the number of days the target ponding depth was reached for each fields. This hydraulic model can assist with accurate irrigation scheduling based on its simulation results. The results of evaluating the irrigation efficiency of water supply can be used for efficient water distribution and management during the drought events.

효율적인 자원 할당을 위한 사전 예약과 즉석 예약 간 공유 자원 관리 (Shared Resource Management Scheme in Advance and Immediate Reservations for Effective Resource Allocation)

  • 이동훈;김종원
    • 한국통신학회논문지
    • /
    • 제29권7B호
    • /
    • pp.685-696
    • /
    • 2004
  • 많은 양의 대역폭을 사용하는 실시간 멀티미디어 응용들은 일정 수준의 서비스 품질을 보장받기 위해 필요한 자원을 사전에 예약하고 이를 사용할 수 있어야 한다. 자원의 사전 예약을 위해서는 해당 자원에 대한 사용 기간의 명시와 이를 이용해 자원을 사전에 예약하고 할당하는 자원 관리자가 필요하다. 따라서 자원의 사용 기간에 관계없이 예약 요청 발생시점에서 가용 자원의 양만을 고려하는 전통적인 자원 할당 방식과는 달리 사전 예약을 제공하는 자원 관리자는 사전에 예약된 자원과 사용 기간을 명시하지 않는 즉석 예약을 위해 할당된 자원이 서로충돌하지 않도록 예약 요청들을 처리해야 한다. 일반적으로 자원 예약의 충돌은 예약 형태에 따라 할당 자원을 분리함으로써 해결할 수 있지만 이는 자원의 낭비를 초래하게 된다. 본 논문은 즉석 예약과 사전 예약 요청을 위해 준비된 자원 공간을 변동하는 자원 경계를 이용해 효율적으로 공유하는 자원 관리 방식을 제안한다. 제안하는 자원 관리 방식은 네트워크 비용 함수를 이용해 자원 간 경계를 설정하고, 예약 자원의 충돌에 따라 비용 함수의 가중치 변수를 조정해 경계를 변화시킴으로써 공유 자원을 효과적으로 할당하고 관리한다. 또한, 사용자 효용 함수의 정의를 통해 예약된 자원을 사용하는 서비스의 품질로부터 사용자가 얻는 효용을 정량적으로 측정하며, 자원의 사전 예약이 사용자 효용 및 전체 자원 활용에 미치는 영향을 고찰한다. 네트워크 시뮬레이터(NS-2)를 이용한 실험은 제안한 자원 관리 방식이 자원 공간의 고정 분할과 같은 방식과 비교해 높은 자원 활용율과 더불어 안정적인 서비스 품질을 제공할 수 있음을 보여준다.

안드로이드 플랫폼에 WiFi 디바이스 탑재 기법 (A Porting Technique of WiFi Device on Android Platform)

  • 정우영;주영관;전중남
    • 중소기업융합학회논문지
    • /
    • 제2권1호
    • /
    • pp.51-58
    • /
    • 2012
  • 안드로이드 플랫폼은 리눅스 2.6 커널을 기반으로 강력한 운영체제와 포괄적 라이브러리, 멀티미디어 환경, 사용자 인터페이스, 폰 애플리케이션 등을 제공한다. 안드로이드는 개방형 운영체제이기 때문에, 어느 벤더기기에든 탑재가 가능하다. 현재 스마트폰뿐만 아니라 넷북, 네비게이션, 카 PC, 태블릿 PC, 산업용 PC 등 여러 분야에서 사용되고 있다. 안드로이드를 다른 기기에 탑재하거나 안드로이드 플랫폼에 새로운 디바이스를 탑재하려면 많은 어려움이 따른다. 본 논문에서는 하드웨어 장치에서 발생한 데이터가 최상위 애플리케이션까지 전달되는 과정과 안드로이드 플랫폼이 하드웨어 디바이스를 관리하는 체계를 분석하고, WiFi 디바이스를 탑재하는 절차를 안드로이드 및 드라이버 컴파일 환경구축, 커널에서 WiFi 사용을 위한 프로토콜 지원, WiFi 디바이스를 커널에 탑재, 안드로이드 플랫폼에 디바이스 드라이버 등록, WiFi 관리서비스 데몬(wpa_supplicant)과 IP 할당서비스 데몬(dhcpcd) 등록, 데몬(wpa_supplicant)과 HAL의 통신을 위한 소켓 생성으로 제시하고 있다. 실험에서는 본 논문에서 제시한 방법을 이용하여 ARM 계열과 X-86 계열의 안드로이드 플랫폼에 WiFi 디바이스를 탑재했다. 안드로이드 플랫폼에 디바이스 탑재 시에는 안드로이드의 소프트웨어 계층을 이해하는 것이 매우 중요하며, 이러한 경험은 안드로이드 플랫폼에 새로운 디바이스를 탑재할 때에도 많은 도움이 될 것이다.

  • PDF

임상병리과의 활동기준원가 관리 적용에 관한 연구 (The Study on Application of Activity-Based Costing System on the Department of Clinical Pathology)

  • 정수경;정기선;최황규;류규수
    • 한국병원경영학회지
    • /
    • 제5권1호
    • /
    • pp.129-155
    • /
    • 2000
  • This empirical study, activity-based costing, a newly introduced approach that has proved to be an improvement over the conventional costing system in product or service costing, is applied at department of clinical pathology in K university hospital. The study subjects were 233 test procedures done in clinical laboratory of K university hospital. Activity analysis was done by interview, questionnaires, and time study, and the amount of resources consumed by each activity and their costs are then traced and applied to the laboratory tests. The main purpose of this study were to compare the test costs of activity-bases costing with those of conventional costing, and test fees of medical insurance, and to provide accurate cost informations for the decision makers of hospital. The major findings of this study were as belows. 1. The cost drivers for application of activity-based costing at clinical laboratory were cases of sample collection, case of specimen, cases of test, and volume-related allocation bases such as direct labor hours and total revenue of each test. 2. The profits of each clinical laboratory fields analyzed by conventional costing were different from the profits analyzed by activity-based costing, especially in the field of Urinalysis(approximately over estimated 750%). 3. The standard full costs by conventional costing were quite different from the costs computed by using activity-based costing, and the difference is most significant with the tests of long labor time. 4. From the comparison between costs computed by using activity-based costing and medical insurance fees, some test fees were significantly lower than the costs, especially in the non-automated fields. As described in this study, activity-based costing provides more accurate cost information than does conventional costing system. The former approach is especially important in the health care industry including hospitals in which planning and controlling the costs services provided are the key to maintaining a healthy financial status for the organization. Despite the contribution of activity-based costing the economic as well as technical feasibilities of implementing such a cost accounting system in an organization must be evaluated. In the development of activity-based costing systems, an activity analysis has to be conducted to identify activities that consume resources. This involves a detailed study of the organization's logistics and accounting information systems, and it is an expensive project in itself. Besides, it can be quite difficult and time consuming to identify and trace resource consumption to a specific activity. Thus the activity-based costing system should be implemented only when the decrease in cost of error far exceeds the increase in cost of measurement. By combining activity-based costing with standard costing, health care administrators can better plan and control the costs of health services provided while ensuring that the organization's bottom line is healthy.

  • PDF

클라우드 기지국 시스템에서 효율적 무선 접속을 위한 이른 스펙트럼 감지 기법 (An Early Spectrum Sensing for Efficient Radio Access in Cloud-Conceptual Base Station Systems)

  • 조가희;이재원;나지현;조호신
    • 한국통신학회논문지
    • /
    • 제38A권1호
    • /
    • pp.68-78
    • /
    • 2013
  • 본 논문에서는 다양한 무선 접속 기술(Radio Access Technology : RAT)들이 공존하는 클라우드 기지국 시스템에서의 효율적인 무선 접속 방법으로 무선인지기술(Cognitive radio)을 활용한 이른 스펙트럼 감지(Early Spectrum Sensing : ESS) 기법을 제안한다. 다중 모드 단말은 무선 접속 시도에 앞서 다중 무선 접속 시스템의 전체 주파수 대역을 대상으로 스펙트럼 감지를 수행하여 그 결과 스펙트럼 활용도가 가장 낮은, 즉 가용 스펙트럼이 가장 많을 것으로 예상되는 시스템을 선택하여 무선 접속을 시도함으로써 시스템 접속 성공 확률을 높일 수 있다. 제안 기법의 성능 분석을 위해 컴퓨터 시뮬레이션을 수행 했으며 그 과정에서 최대한 다양한 무선 접속 시스템이 혼재하는 상황을 고려하고자 했다. 우선, 서킷과 패킷 시스템으로 구별한 후, 다시 패킷 시스템을 반송파 결합(Carrier Aggregation : CA) 가능 여부에 따라 다시 구별했으며, 단말기의 경우, 서킷 전용, 패킷 전용, 다중 모드로 구별함과 동시에 CA 능력에 따라서 역시 구별하였다. 또한, 패킷 트래픽의 경우, 실시간 트래픽과 3단계의 패킷 지연 허용 정도를 갖는 비실시간 트래픽으로 구분하였다. 이러한 다양한 무선 접속 환경이 고려된 클라우드 기지국 시스템에서 호 발생에서 호의 서비스 품질(Quality of Service : QoS)이 고려된 자원 할당까지의 일련의 과정을 시뮬레이션에 반영하여 시스템 접속 실패 확률, 평균 시스템 접속 시간, 시스템 균형 인수, 패킷 손실 확률 측면에서 제안 방식의 성능을 분석하였다.

Projection of Cancer Incident Cases for India - Till 2026

  • Dsouza, Neevan D.R.;Murthy, N.S.;Aras, R.Y.
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제14권7호
    • /
    • pp.4379-4386
    • /
    • 2013
  • Projection of cancer incidence is essential for planning cancer control actions, health care and allocation of resources. Here we project the cancer burden at the National and State level to understand the magnitude of cancer problem for the various calendar years from 2011 to 2026 at 5-yearly intervals. The age, sex and site-wise cancer incidence data along with populations covered by the registries were obtained from the report of National Cancer Registry Programme published by Indian Council of Medical Research for the period 2001-2004. Pooled age sex specific cancer incidence rates were obtained by taking weighted averages of these seventeen registries with respective registry populations as weights. The pooled incidence rates were assumed to represent the country's incidence rates. Populations of the country according to age and sex exposed to the risk of development of cancer in different calendar years were obtained from the report of Registrar General of India providing population projections for the country for the years from 2001 to 2026. Population forecasts were combined with the pooled incidence rates to estimate the projected number of cancer cases by age, sex and site of cancer at various 5-yearly periods Viz. 2011, 2016, 2021 and 2026. The projections were carried out for the various leading sites as well as for 'all sites' of cancer. In India, in 2011, nearly 1,193,000 new cancer cases were estimated; a higher load among females (603,500) than males (589,800) was noted. It is estimated that the total number of new cases in males will increased from 0.589 million in 2011 to 0.934 million by the year 2026. In females the new cases of cancer increased from 0.603 to 0.935 million. Three top most occurring cancers namely those of tobacco related cancers in both sexes, breast and cervical cancers in women account for over 50 to 60 percent of all cancers. When adjustments for increasing tobacco habits and increasing trends in many cancers are made, the estimates may further increase. The leading sites of cancers in males are lung, oesophagus, larynx, mouth, tongue and in females breast and cervix uteri. The main factors contributing to high burden of cancer over the years are increase in the population size as well as increase in proportion of elderly population, urbanization, and globalization. The cancer incidence results show an urgent need for strengthening and augmenting the existing diagnostic/treatment facilities, which are inadequate even to tackle the present load.

유비쿼터스 센서 네트워크 기술을 활용한 무인감시체계 연구 (A study on unmanned watch system using ubiquitous sensor network technology)

  • 위겸복
    • 안보군사학연구
    • /
    • 통권7호
    • /
    • pp.271-303
    • /
    • 2009
  • "Ubiquitous sensor network" definition is this-Someone attaches electro-magnetic tag everything which needs communication between man to man, man to material and material to material(Ubiquitous). By using attached every electro-magnetic tag, someone detects it's native information as well as environmental information such as temperature, humidity, pollution and infiltration information(Sensor). someone connects it realtime network and manage generated information(Network). 21st century's war is joint combined operation connecting with ground, sea and air smoothly in digitalized war field, and is systematic war provided realtime information from sensor to shooter. So, it needs dramatic development on watch reconnaissance, command and control, pinpoint strike etc. Ubiquitous computing and network technologies are essential in national defense to operate 21st century style war. It is possible to use many parts such as USN combined smart dust and sensor network to protect friend unit as well as to watch enemy's deep area by unmanned reconnaissance, wearable computer upgrading soldier's operational ability and combat power dramatically, RFID which can be used material management as well as on time support. Especially, unmanned watch system using USN is core part to transit network centric military service and to get national defense efficiency which overcome the dilemma of national defense person resource reducing, and upgrade guard quality level, and improve combat power by normalizing guardian's bio rhythm. According to the test result of sensor network unmanned watch system, it needs more effort and time to stabilize because of low USN technology maturity and using maturity. In the future, USN unmanned watch system project must be decided the application scope such as application area and starting point by evaluating technology maturity and using maturity. And when you decide application scope, you must consider not only short period goal as cost reduction, soldier decrease and guard power upgrade but also long period goal as advanced defense ability strength. You must build basic infra in advance such as light cable network, frequency allocation and power facility etc. First of all, it must get budget guarantee and driving force for USN unmanned watch system project related to defense policy. You must forwarded the USN project assuming posses of operation skill as procedure, system, standard, training in advance. Operational skill posses is come from step by step application strategy such as test phase, introduction phase, spread phase, stabilization phase and also repeated test application taking example project.

  • PDF

요금소 하이패스 차로 배치 최적화를 위한 하이패스 차량 교통분산율 추정 (Estimation of Hi-pass Traffic Dispersion Rates to Determine The Optimal Location of Hi-pass Lanes at A Toll Plaza)

  • 이재수;이기영;이철기;윤일수;유정훈
    • 한국ITS학회 논문지
    • /
    • 제12권4호
    • /
    • pp.22-32
    • /
    • 2013
  • 고속도로 이용차량중 통행료 전자지불장치인 하이패스를 장착한 차량의 비율이 급속도로 증가하고 있는 상황에서, 요금소 하이패스 차로 배치의 최적화는 교통제어와 운영측면에서 매우 중요하다. 본 연구에서는 영업소별 물리적 기하구조 형태와 교통 특성을 고려하여 현재의 하이패스차로 설치 위치의 적정성을 분석하였다. 이를 위해 하이패스 차로별로 차량이 균등하게 배분되어 이용하는가를 측정하기 위해 "하이패스차량 교통분산율"이라는 새로운 평가지표를 개발하였다. 또한 교통분산율에 영향을 주는 변수들을 도출하여 이러한 변수들과 교통분산율과의 관계를 로지스틱회귀모형을 이용하여 추정하였다. 모형추정결과에 따르면 하이패스 교통량, 광장부 길이, 진입연결로와의 거리, 진출연결로와의 거리, 중앙 배치비율, 우측배치비율 등의 변수들이 교통분산율에 영향을 주는 것으로 파악되었으며, 이중에서 하이패스 차로배치 위치 변수인 중앙 배치비율, 우측 배치비율을 조정함으로서 교통분산율을 개선할 수 있는 것으로 밝혀졌다. 본 연구를 통해 하이패스차로 배치의 적정성을 판단할 수 있는 교통분산율을 계량화할 수 있게 되어 하이패스차로 위치 선정과 운영방식을 최적화할 수 있을 것으로 기대된다.

갱년 및 폐경 후 여성의 안면홍조에 대한 침 치료 다기관 임상연구 : 수행보고 및 방법론적 교훈 (Methodologic Lessons Learned from Multicenter, Randomized, Controlled Clinical Trial of Acupuncture for Hot Flashes in Peri- and Postmenopausal Women)

  • 김건형;김동일;황덕상;이진무;김형준;윤현민;정희정;강경원;이명수;최선미
    • 대한한방부인과학회지
    • /
    • 제23권1호
    • /
    • pp.42-52
    • /
    • 2010
  • Purpose: This report aims to administer methodologic issues around recently conducted multicenter study for evaluating the effects of acupuncture on menopusal hot flashes and discuss practical issues for further implementation of acupuncture clinical trial for hot flashes. Methods: Study process were mentioned, and issues related to avoiding risk of bias, designing appropriate control group, optimal outcome measurement, potential different effects of menopausal status on study outcomes, and suggestions for developing future clinical trials are discussed. Results: Shortcomings of our multicenter study include lack of allocation concealment and assessor blinding, subjective outcome measurement, short-term follow-up, and fixed acupuncture regimen despite pragmatic purpose of this study. Improving trial design, using objective or validated outcomes, assessing long-term effects of acupuncture, and individualizing acupuncture regimen are needed in future clinical trials. Conclusion: We expect these practical discussions to enable researchers to plan and develop future well-designed clinical trials for evaluating the effects of acupuncture on hot flashes or other women's health issues.

표면 마감 광촉매 스프레이 모르타르의 리바운드량 저감 방안 연구 (A Study on the Reduced Rebound Method of Surface Finishing Spray Photocatalytic Mortar)

  • 백효선;박정환
    • 한국산학기술학회논문지
    • /
    • 제21권9호
    • /
    • pp.604-609
    • /
    • 2020
  • 콘크리트 표면 마감에는 다양한 방법이 있으며, 시공성을 고려할 때 스프레이 방법이 효과적이나 리바운드 발생 현상이 발생한다. 통상 숏크리트의 손실률은 30-45%가량 보고되고 있으며, 이로 인하여 작업 효율 저하 및 공사비 상승 등의 문제를 발생시킨다. 이를 해결하고자 다양한 선행 연구가 진행되었으며 리바운드량을 저감하기 위해서는 사용재료에 따라 리바운드 발생 억제를 위해 배합을 조정하여야 하며 본 연구에서는 광촉매가 포함된 표면 마감재료에 적합한 리바운드 발생량 저감 목적의 배합 기술에 대한 기초 연구를 진행하였다. 본 연구의 선행연구로는 광촉매 성능에 대해 저감효과 및 최적 혼합 비율을 도출하였고, 선행연구를 바탕으로 규사 함량에 따른 리바운드 저감 및 혼화 재료 별 역학적 내구 특성 검증을 진행하였다. 시험 방법으로는 리바운드, 압축강도, 휨강도, 테이블 플로 시험으로 진행하였고, 모르타르 스프레이 장비의 작업성을 고려하였을 때 Flow 170±10mm로 고정하였다. 실험 변수로는 시멘트 중량 대비 규사 변수로 맞추어 리바운드량 측정을 하였고 규사는 5호, 7호 규사를 사용하였다. 실험 결과 최종 S-1 변수에서 가장 높은 압축강도를 나타냈고 리바운드 양을 최소화할 수 있었다. 이러한 결과는 규사 공극의 결합재가 충분히 충진하게 되어 골재 사이의 결합력이 증가되므로 낮은 리바운드 양을 확보할 수 있었다.