• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1992.10a
• /
• pp.34-38
• /
• 1992

Geometry based CAD/CAM system is hard to achieve "net shape machining" For a net shape machining, the machining errors should be compensated by off-line CAD/CAM system followed by on-line control system. In this paper, we investigate an off-line compensation scheme for the machining errors due to tool deflection in contouring operation. The significance of the deflection errors is first shown, and a compensation is sought via modifying the nominal tool path. In modification, tool deflection amount is iteratively compensated until the deflection amount is iteratively compensated until the deflected path results in the desired contour within a tolerance. The path modification algorithm has been tested via computer simulation. The developed algorithm can be used as a postprocessor for the current CAD/CAM system based on geometric modeling as a means for enhancing the machining accuracy.

• Archives of Plastic Surgery
• /
• v.38 no.4
• /
• pp.383-390
• /
• 2011

Purpose: To correct the upper lip depression after the correction of unilateral cleft lip, autologous grafts such as bone, dermal, fascial grafts and fat injections or alloplastic implants are used. Transplanted bones, dermis and fascia have a tendency to be absorbed and have donor morbidity. Fat injections are absorbed inconsistently and alloplastic implants have problems such as foreign body reactions, protrusions and infections. Authors corrected the upper lip depression using conchal cartilage graft in unilateral cleft lip deformity and the results was analysed with photos. Methods: 26-unilateral cleft lip and 2-microform cleft lip cases, totally 28 cases were performed. Their mean age was 21.89 years. The male and female cases were 12 and 16, respectively. Under anesthesia (general: 18 cases and local: 10 cases), cavum conchae (n=8), cymba conchae (n=16) and whole conchae (n=4) were harvested. Transversely cut the margin of the obtained cartilage, we cut out the most bent portion and put a partial-thickness incision on concave surface in cases of excessive convexity. Then, we performed the onlay graft of the conchal cartilage via scar revision site in unilateral cleft lip and via the reconstruction site of the cupid bow in microform cleft lip. The augmentation of the upper lip was evaluated with photos. Adapting the baseline connecting between the both cheilions as a horizontal standard line, we measured the highest point among the tangents between the upper lip and nose (point a), the lowest point (point c), the middle point between a and c (point b) and the vertical line from the alare (point d) to the horizontal standard line. To assess the postoperative symmetry, we compared cleft side upper lip contour index (%) A,B,C,D=(a,b,c,d)-ch ${\times}$ 100/(ch-ch) and non-cleft side upper lip contour index (%) A',B',C',D'= (a',b',c',d')-ch ${\times}$ 100 / (ch-ch).h) Results: After the surgery, no complication was found except in one case which double layers graft performed in the cleft lip deformity, the lateral portion was protruded. The upper lip contour index, the difference of A and A' were-0.83%, and thus the mild depression was persisted. Difference of B and B', C and C', D and D' were 0.83%, 1.07%, 0.90%. There were statistically significant difference, and thus the depression of upper lip were improved generally. Conclusion: Authors performed the onlay graft of the conchal cartilage in unilateral cleft lip deformity and found that the depression of the upper lip was well corrected except the uppermost part when photogrammetrically analyzed.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.2E
• /
• pp.47-52
• /
• 1998

An analysis of dynamic responses is carried out on monoclinic anisotropic system due to a buried harmonic line source. The load is in the form of a normal stress acting along an arbitrary axis on the plane of symmetry within the orthotropic materials: In case that the line load is acting along the symmetry axis normal to the plane of symmetry, plane wave equation is coupled with verital shear wave and longitudinal wave. However, if the line load is acting along an arbitrary axis normal to the plane of symmetry, plane wave equation is coupled with vertical shear wave, longitudinal wave and horizontal shear wave. We first considered the equation of motion in a reference coordinate system, where the line load is coincident with a symmetry axis of the orthotropic material. Then the equation of motion is transformed into one with respect to general coordinate system with azimuthal angle by using transformation tensor. Plane wave solutions of monoclinic systems are derived for infinite media. Finally complete solutions for the plane harmonic wave are obtained by calculating the inverse of the integral transforms, in which bulk wave poles are avoided by deforming the contour of the integration to the complex plane. Numerical results for examples of orthotropic material belonging to monoclinic symmetry are demonstrated.

• Journal of KSNVE
• /
• v.8 no.5
• /
• pp.974-980
• /
• 1998

The analysis of dynamic responses are carried out on several orthotropic systems due to transient line source. These include infinite and semi-infinite spaces. The media possess orthotropic or higher symmetry. The lode is in the form of a normal stress acting with parallel to symmetry axis on the plane of symmetry within the materials. The results are first derived for responses of infinite media due to a harmonic line source. Subsequently the results for semi-infinite are derived by using superposition of the solution in the infinite medium together with a scattered solution from the boundaries. The sum of both solutions has to satisfy stress free boundary conditions thereby leading to the complete solutions. Explicit splutions for the displacements due to transient line loads are then obtaind by using Cargniard-DeHoop contour.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.8
• /
• pp.539-545
• /
• 2015

Intense acoustic load is generated when a launch vehicle lifts off, causing the damaging vibrations at the launch vehicle or satellite within the fairing. This paper is concerned with the prediction of lift-off acoustic loads for a launch vehicle. As a test example, the lift-off acoustic load on the Korean launch vehicle, NARO, is predicted by the existing calculation tool, the modified Eldred's second method. Although the acoustic sources, assumed as point sources, are to be located along the center line of the exhaust plume when using the Eldred's prediction method, the exact location of the deflected center line of exhaust gas flow is not usually known. To search for the most appropriate source positions, six models of source line distribution are suggested and the acoustic load prediction results from these models are compared with the actual measurements. It is found that the predicted sound pressure spectrum of the Naro is the most similar to the measured data when the centerline of the turbulent kinetic energy contour is used as the source line.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.28B no.7
• /
• pp.578-589
• /
• 1991

In this paper, there is proposed a novel concept of Incremintal Circle Transform which can describe the boundary contour of a two-dimensional object without object without occlusions. And a pattern recognition algorithm to determine the posture of an object is developed with the aid of line integral and similarity transform. Also, It is confirmed via experiments that the algorithm can find the posture of an object in a very fast manner independent of the starting point for boundary coding and the position of the object.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.466-471
• /
• 1996

This work is concerned with the development of digital contouring controller formulti-axial servosystems. Digital optimal contouring controller is proposed to coordinate each of the controllers of multiple feed drives and specifically improve the controuring performance. The optimal control formulation includes the contour error explicity in the performance index to be minimized. The contouring control is exercised for straight line and circular contours. Substantial improvement in contouring perfomance is obtained for a range of contouring conditions. Both steady state and transient error measures have been considered. The simulation study presented has estiblished the potential of the proposed controller to improve contourning perfomance.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.917-922
• /
• 1990

Pattern classification is an essential step in automatic robotic assembly which joins together finite number of seperated industrial parts. In this paper, a fast and systematic algorithm for classifying occlusion-free objects is proposed, using the notion of incremental circle transform which describes the boundary contour of an object as a parametric vector function of incremental elements. With similarity transform and line integral, normalized determinant curve of an object classifies each object, independent of position, orientation, scaling of an object and cyclic shift of the stating point for the boundary description.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.609-611
• /
• 1998

본 논문에서는 수치고도모델로부터 정확한 등고선을 추출하는 방법을 연구하였다. 이것은 하나의 높이 평면과 DEM 데이터의 교점 테스트를 통하여 등고선을 찾는 방법이다. 정해진 높이 평면과 교차하는 지형의 모든 점을 찾아내므로 등고선을 정확히 찾아낸다는 장점이 있다. 본 논문의 결과를 비교 분석함으로서 연구의 정확성을 도모하였다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.12
• /
• pp.665-682
• /
• 2007

Line drawing is a widely used style in non-photorealistic rendering because it generates expressive descriptions of object shapes with a set of strokes. Although various techniques for line drawing of 3D objects have been developed, line drawing of 2D images has attracted little attention despite interesting applications, such as image stylization. This paper presents a robust and effective technique for generating line drawings from 2D images. The algorithm consists of three parts; filtering, linking, and stylization. In the filtering process, it constructs a likelihood function that estimates possible positions of lines in an image. In the linking process, line strokes are extracted from the likelihood function using clustering and graph search algorithms. In the stylization process, it generates various kinds of line drawings by applying curve fitting and texture mapping to the extracted line strokes. Experimental results demonstrate that the proposed technique can be applied to the various kinds of line drawings from 2D images with detail control.