• Journal of Environmental Health Sciences
• /
• v.34 no.3
• /
• pp.233-239
• /
• 2008

In order to improve reactor performance of existing sewage treatment plants, the feasibility of enhancing reactor performance by bioaugmentation using EM as bioaugmentation agent and the effects of anoxic: oxic time ratio on reactor performance were investigated. Continuous and intermittent aeration modes were compared under the 6 hr of HRT. Three different types of intermittent aeration modes, that is, 15 min, of anoxic:45 min of oxic, 30 min of anoxic: 30 min of oxic, and 45 min of anoxic: 15 min oxic respectively were chosen as test modes to study the effects of anoxic : oxic time ratios on reactor performance. The optimum anoxic: oxic time ratio was 30 min:30 min when considering simultaneous removal of organic, nitrogen and phosphorus. When applying EM into a continuously aerated reactor under the varying dosing rates of 50-200 ppm, reactor performance in terms of organic and nitrogen removal efficiencies was not improved at all. Nitrogen removal efficiency was increase when the EM dosing rate was increased. However the degree of improvement was slight when the EM was injected above 100 ppm. However optimum phosphorus removal was found at the EM dosing of 200 ppm. Thus it was found that optimum injection concentration of EM is 200 ppm. It is apparent that putting EM into a sewage treatment plant significantly affects the T-N removal efficiency of the reactor by enhancing denitrification efficiency especially in operational conditions of relatively long anoxic periods. To achieve reciprocal condition in a reactor with intermittent aeration it is necessary to enhance the reactor performance by EM injection. In the case of modifying existing continuously aerated reactors into intermittent aerated reactors, it is obvious that operating costs of aeration would be reduced by reducing aeration time when compared with existing conventional sewage treatment plants.

• Journal of the Society of Naval Architects of Korea
• /
• v.55 no.6
• /
• pp.497-504
• /
• 2018

Platform Support Vessels operated in the Arctic Ocean support diverse operations of offshore plant in the sea, and the PSV is also needed to support works to exploit the oil and gas in the Arctic Ocean. Both of the ice breaking and the open sea performance have been considered together to secure the enhanced operational performance at the harsh environment in the Arctic Ocean and the open sea as well. In this study, One of the design requirements of a PSV is to guarantee continuous icebreaking performance with 3 knots at 1 m thickness of level ice, where the design draft is 7.5m and the engine power is 13 MW. Three hull forms were designed, and the ice resistance based on empirical formulas was estimated to select the initial hull form having an outstanding performance. The full scale performance of the designed hull forms was predicted by the ice model test conducted in the ice model basin of Korea Research Institute of Ships & Ocean Engineering(KRISO). The analysed results show that the selected hull form satisfies the above design requirement.

• Physical Therapy Korea
• /
• v.10 no.3
• /
• pp.71-79
• /
• 2003

Manual tracking is an experimental paradigm that can be used to study information processing in continuous movements involving accurate, ongoing control of motor performance. The purpose of this study was to identify the effects of knee tracking training, using the paretic side, on gait in stroke patients. Nine patients with hemiplegia participated in the study. The timed 10 m gait speed test and tracking test were administrated. The tracking test was composed with ranges of $-20^{\circ}$ to $20^{\circ}$ and $0^{\circ}$ to $60^{\circ}$. The tracking training consisted of five times every week for 4 weeks. The data were analyzed by non-parametric paired sign test of Wilcoxon. The flexion/extension error of the tracking test was significantly reduced on the paretic side, while the nonparetic side was not statistically significant. The transfer of the skill to the functional activity was shown in the significant improvement at timed 10 m gait speed test. This study shows that individuals with chronic who have impaired knee movement can be trained to improve their knee control through intensive practice at a knee movement tracking task and that the skill learned from such training is transfered to a more functional gait speed.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.1
• /
• pp.95-110
• /
• 2014

The purpose of this research is to further investigate the influence of partnership between with the mediator effect of the social business on the outcome of SCM. IT technology fusion electronic tags, mobile phone, such as cloud computing is also activated in supply chain management of recently, business is faster, if social business is applied here that are smarter, customers or suppliers, there may be communication directly and to further improve the relationship partnership. 150 questionnaires were sent to companies that have introduced SCM to their systems and are operating it. Among 150 questionnaires, 127 collected data were analyzed excluding incomplete 23 data. Statistical methods used in this study were frequency analysis, factor analysis, reliability analysis, t-test, ANOVA, path analysis, Scheffe test and Sobel test with Amos 18.0. and SPSS 21.0. The analytical results are as follows. First, the more the reliability, information share, continuous transaction, effects on the social business are getting higher, the interdependence has little impact on it. Second, the impact on the outcome of SCM, partnerships between companies, showed a significant influence the reliability, the share of information, the continuous transaction, but the interdependence was analysed as an uninfluential factor. Third, the social business is analyses to have a mediator effect in relationship between the partnership and the outcome of SCM.

• Sleep Medicine and Psychophysiology
• /
• v.8 no.2
• /
• pp.129-137
• /
• 2001

Objectives: The purpose of this study is to investigate the effects of 38-hour sleep deprivation on fine motor performance. The Motor Performance Series (MPS) in the Vienna Test System (computerized neurocognitive function tests) was used in this study. Methods: Twenty four subjects participated in this study. Subjects had no past history of psychiatric disorders and physical illness. Subjects had normal sleep-waking cycle without current sleep disturbances and were all right-handed (Annett's Hand Preference Questionnaire: above +9 points). To minimize the learning effects, familiarization with the Vienna Test System was performed one day before the study. Subjects were to get up at 6:00 in the morning after getting enough sleep according to his or her usual sleep-wake cycle. After awakening, subjects remained awake for 38 hours under continuous surveillance. During two consecutive study days, the subjects tested MPS at 7 AM and 7 PM each day, which means the MPS was done four times in total. During the experiment, anything that could affect the subjects' sleep such as coffee, tea, alcohol, a nap, tiring sports, and all medications were prohibited. Results: In MPS, the fine motor functions of both hands decreased after 38 hours of sleep deprivation. The decrement in motor performance was prominent in the dominant right hand. In the right hand, the total number of tapping was reduced (p<.005), and the number of misses (p<.05) and the length of misses (p<.05) of line tracking, the total length of inserting a short pin (p<.01), the total length of inserting a long pin (p<.05), and the number of misses in aiming (p<.05) increased. Such performance decrement was distinct in the morning sessions. Conclusions: These results suggest that fine motor performance decrement during sleep deprivation is predominant in the right hand, which exerts maximal motor function. The finding of decrement in motor function in tapping during sleep deprivation also suggested that the time required for exhaustion of muscles is shortened during sleep deprivation. More deterioration of motor performance was shown in the morning, which could be explained as circadian rhythm effects.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.343-349
• /
• 2011

Now, for the continuous location detection of train, the method that the moving distance of a vehicle is detected using an wheel sensor(odometer) mounted within a train, is generally used. It has a problem that the positioning errors of a train can be accumulated as the moving distance increases. To solve this problem, it is required to apply a variety of positioning sensors and to integrate with sensor data. In this paper, we develop the train-borne positioning system applicable to the conventional railway and high-speed railway, and verify the performance of the train-borne positioning system through a vehicle test.

• International Journal of High-Rise Buildings
• /
• v.4 no.4
• /
• pp.249-259
• /
• 2015

This paper introduces the structural design and construction method for the foundation of the TOKYO SKYTREE, a new digital broadcasting tower in Tokyo, which has a height of 634 meters. The surface layer of the ground is occupied by soft soil, thus the foundation of this tower is an SRC continuous underground wall pile, designed and developed to have horizontal rigidity and pull-out resistance. The structural integrity and construction method of the wall pile was verified with an on-site full scale pull-out test concluding a maximum load of 40,000 kN.

• Proceedings of the IEEK Conference
• /
• 2000.06c
• /
• pp.19-22
• /
• 2000

This paper presents new on-line handwritten algorithm for continuous alphabet uppercase characters. The algorithm is based on the idea that alphabet uppercase character consists of at most 4 strokes. It tries to determine the maximum output for a recognition result among outputs of four recognizers which have the capacity to discriminate the character using from 1 through 4 stroke information. The recognition module has 4 neural network based recognizers, which can recognize from 1 through 4 stroke character. We also use specialized post-processing techniques for improving the recognition performance. Trained on 440 input data and choosing 390 uppercase words for a recognition test we reached a 92% recognition rate.

• Carbon letters
• /
• v.19
• /
• pp.47-56
• /
• 2016

In this study, the fracture behavior of a thermoplastic-modified epoxy resin reinforced with continuous carbon fibers for two levels of fiber-matrix adhesion was performed. A carbon fiber with commercial sizing was used and also treated with a known silane, (3-glycidoxy propyl trimethoxysilane) coupling agent. Toughness was determined using the double cantilever test, together with surface analysis after failure using scanning electron microscope. The presence of polysulfone particles improved the fracture behavior of the composite, but fiber-matrix adhesion seemed to play a very important role in the performance of the composite material. There appeared to be a synergy between the matrix modifier and the fiber-matrix adhesion coupling agent.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.32 no.4
• /
• pp.1-18
• /
• 2007

In this paper, we develop an adaptive genetic algorithm (aGA). The aGA has an adaptive scheme which can automatically determine the use of local search technique and adaptively regulate the rates of crossover and mutation operations during its search process. For the adaptive scheme, the ratio of degree of dispersion resulting from the various fitness values of the populations at continuous two generations is considered. For the local search technique, an improved iterative hill climbing method is used and incorporated into genetic algorithm (GA) loop. In order to demonstrate the efficiency of the aGA, i) a canonical GA without any adaptive scheme and ii) several conventional aGAs with various adaptive schemes are also presented. These algorithms, including the aGA, are tested and analyzed each other using various test problems. Numerical results by various measures of performance show that the proposed aGA outperforms the conventional algorithms.