• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 추계학술발표대회 논문집
• /
• pp.230-233
• /
• 2003

Among the various manufacturing processes of composites, the tape lay-up process of thermoset prepreg has many advantages compared to autoclave or hot press forming. It has a high potential to process automation and continuous fabrication. In this study, temperature distribution of composite exposed in hot gas was studied numerically and the validity of the analysis was verified by the experiments.

• 산업경영시스템학회지
• /
• 제17권31호
• /
• pp.91-98
• /
• 1994

Most of machines are physically or chemically degenerated by continuous usage. There- fore, a preventive maintenance is necessary. Producing defects are caused by process shift in mean and variance which are due to three types of degeneration. We develope the function of process variance from the experimental data and determine the optimal tool wear limit and the initial setting position of tool by considering the percent defective cost and the preventive maintenance cost.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권4호
• /
• pp.275-287
• /
• 2000

Fermentation strategies for recombinant protein production in Pichia pastoris have been investigated and are reviewed here. Characteristics of the expression system, such as phenotypes and carbon utilization, are summarized. Recently reported results such as growth model establishment, app58lication of a methanol sensor, optimization of substrate feeding strategy, DOstat controller design, mixed feed technology, and perfusion and continuous culture are discussed in detail.

• 한국산학기술학회논문지
• /
• 제14권9호
• /
• pp.4627-4634
• /
• 2013

지구온난화 주요 원인 중에 하나인 이산화탄소의 효율적 저감을 위해 새로운 흡수제인 아미노산염 흡수제를 개발하여 이산화탄소 연속공정을 연구하였다. 이산화탄소 포집 및 저장에 소요되는 비용 중 약 70%는 이산화탄소 포집비용이며, 이산화탄소 포집 공정 중에서 이산화탄소 흡수, 재생, 열화 등 흡수제에 의한 공정유지 비용이 대부분을 차지한다. 따라서 연속공정을 통한 흡수제의 특성 평가는 새로운 흡수제 개발에 매우 중요한 요소이다. 본 연구에서는 potassium L-lysine 흡수제의 이산화탄소 흡수 재생 연속공정을 평가하여 공정 스케일업에 필요한 엔지니어링 자료를 도출하고자 하였다. 흡수제와 이산화탄소 농도 변화 등 다양한 조건에서 아미노산염 흡수제의 최적 조건을 평가하였다. 동일한 조건에서 L/G가 커질수록 이산화탄소 제거율이 높게 나타났으며, L/G 3.5에서 흡수탑과 재생탑 공정이 안정하게 유지되었다. 또한 아미노산염 흡수제는 유량 1.5 $Nm^3/h$인 상태에서 L/G 3.5, 이산화탄소 농도 10.5 vol%의 공정 조건일 때 가장 높은 이산화탄소 제거효율이 나타내었다.

• 한국미생물·생명공학회지
• /
• 제24권6호
• /
• pp.717-725
• /
• 1996

We have developed an efficient immobilized cell separator for continuous operation of immobilized fungal cell cultures, and applied this separator to actual fermentation process for the production of cyclosporin A (CyA), a powerful immunosuppressant. In the experiments employing highly viscous polymer (carboxymethyl cellulose) solution, the decantor showed good separating performances at high solution viscosites and fast dilution rates. Air duct and cylindrical separator installed inside the decantor turned out to play key roles for the efficient separation of the immobilized cells. By installing the decantor in an immobilized perfusion reactor system (IPRS), continuous immobilized culture was stably carried out even at high dilution rate for a long period, leading to high productivities of free cells and CyA. Almost no immobilized biomass existed in effuluent stream of the IPRS, demonstrating the effectiveness of the decan- tor system for a long-term continuous fermentation. It was noteworthy that we could obtain these results despite of the unfavorable fermentation conditions, i.e., reduced density of the biosupports caused by overgrowth of cells inside the bead particles and existence of high density of suspended fungal cells (10g/l) in the fermentation broth.

• 한국주조공학회지
• /
• 제18권6호
• /
• pp.570-577
• /
• 1998

An investigation has been conducted to describe solidification characteristics in Sn-Zn binary system and Sn-Zn-Ag ternary system added by Ag produced by the continuous casting process using heated mold as a basic study for developing Pb-free solder materials. To obtain the continuous casting rods with mirror surface and near net shape at higher casting speed, water flow rates must be increased and mold temperature must be lowered. However, surface tearing in the casting rods occured at lower continuous casting speed while break out occured at higher continuous casting speed even if optimum conditions such as water flow rate and heated mold temperature are determined. Primary ${\alpha}Sn$ and eutectic structure in unidirectioally solidified Sn-Zn alloys were finer with increased casting speed. But, directionality may not be expected for primary Zn in hypereutectic Sn-Zn alloy. It was found that the addition of $0.2{\sim}0.8%$ Ag promoted the growth of primary ${\alpha}Sn$ dendrites. The changes of tensile strength and elongation in Sn-Zn binary alloys were not observed while the increase of tensile strength and the decrease of elongation in Sn-Zn-Ag ternary alloys were observed with increased casting speed.

• 산업공학
• /
• 제16권2호
• /
• pp.248-257
• /
• 2003

In a heated rolling process of a steel mill where steel plates are pressed to a sheet coil by spreading and expanding, an irregularly-shaped head portion as well as a tail portion of the sheet coil need to be cropped. Any crop which is not clearly cut and separated from the sheet coil may cause critical damages to the facilities of the following processes. As the cropping process is performed very fast, human eyes are not proper for continuous monitoring of the cropping process. To solve this problem, we have developed a machine-vision based crop-drop detection system. The system also measures lengths of major and minor axes for the crops and thereby determines the proper crop size to minimize steel sheet losses.

• 정보처리학회논문지D
• /
• 제10D권1호
• /
• pp.45-56
• /
• 2003

무선 환경에서 시공간 이동 객체들의 위치 정보를 획득할 수 있는 기술들의 발달로 인해, 차량 추적 시스템, 산불 관리 시스템, 디지털 전장 시스템 등과 같은 다양한 응용 시스템들이 개발되고 있다. 이와 같은 응용에서는 이동 객체의 연속적인 변화 과정을 표현하고, 처리할 수 있는 데이터 모델이 필요하다. 그러나 관계형 모델을 이용하여 이동 객체를 표현할 경우 매 시간 마다 변경된 모든 정보를 저장할 수 없는 문제점이 발생된다. 또한 기존의 이동 객체 데이터 모델에서는 질의 시점을 데이터베이스로 관리되는 과거 시간이나 현재로부터 가까운 미래 시간으로 제한하는 단점이 있다. 따라서 이 논문에서는 모양 변화 처리 기법과 과거와 미래의 위치 추정 함수를 사용함으로써 이동 점 및 이동 영역 객체의 연속적인 움직임을 표현하고 모든 질의 시점에서의 연산을 저리 할 수 있는 이동 객체 데이터 모델을 제안한다 아울러 제안 모델을 산불관리 시스템에 적용 및 구현한 결과를 통해 타당성을 평가한다.

• 한국정밀공학회지
• /
• 제22권6호
• /
• pp.135-143
• /
• 2005

The shoes process management monitoring system for supporting SCM is developed in this study. This system consists of a monitoring program, a conveyer system, a pneumatic unit, a controller, an USB camera, and a server and a client computer. To operate the developed system easily, the monitoring program using LabVIEW in the Windows environment is developed. This program consists of 5 modules: production management, inventory control, media management, defective management, and communication management. The developed system has several advantages: reduced time for managing process work, decreased labor costs, effective operation, and continuous work without an operator. Nowadays advanced manufacturing companies are trying to find a way to check the performance of their production equipments and plants from remote sites. Thus, to manage the developed system from remote sites, communication network is constructed. In order to evaluate the performance of the monitoring system, experiments were performed. The experimental results showed that the developed system provided a reliable performance and a stable communication.

• 산업공학
• /
• 제16권3호
• /
• pp.375-381
• /
• 2003

To ensure competitiveness in the modern automotive market, process planning should be performed concurrently with new car developments. In automotive general assembly shops, thus, new business workflows and supporting environments are inevitable to reduce the manufacturing preparation time in developing a new car in the manner of concurrent and collaborative engineering. Since complete process planning for a whole general assembly system is a huge and complex job, several process planners should execute their planning jobs and share information. Therefore, each planner should provide others with his/her results with continuous on-line communication and cooperation. In this research, a web-based system for concurrent and collaborative process planning for automotive general assembly is developed. By using this system, savings in time and cost of assembly process planning are possible, and the reliability of the planning result is improved.