• Journal of the Korean Society of Safety
• /
• v.31 no.3
• /
• pp.42-46
• /
• 2016

In LCD Display or semiconductor manufacturing processes, the anti-static technology of glass substrates and wafers becomes one of the most difficult issues which influence the yield of the semiconductor manufacturing. In order to overcome the problems of wafer surface contamination various issues such as ionization in decompressed vacuum and inactive gas(i.e. $N_2$ gas, Ar gas, etc.) environment should be considered. Soft X ray radiation is adequate in air and $O_2$ gas at atmospheric pressure while UV radiation is effective in $N_2$ gas Ar gas and at reduced pressure. At this point of view, the "vacuum ultraviolet ray ionization" is one of the most suitable methods for static elimination. The vacuum ultraviolet can be categorized according to a short wavelength whose value is from 100nm to 200nm. this is also called as an Extreme Ultraviolet. Most of these vacuum ultraviolet is absorbed in various substances including the air in the atmosphere. It is absorbed substances become to transit or expose the electrons, then the ionization is initially activated. In this study, static eliminator based on the vacuum ultraviolet ray under the above mentioned environment was tested and the results show how the ionization performance based on vacuum ultraviolet ray can be optimized. These vacuum ultraviolet ray performs better in extreme atmosphere than an ordinary atmospheric environment. Neutralization capability, therefore, shows its maximum value at $10^{-1}{\sim}10^{-3}$ Torr pressure level, and than starts degrading as pressure is gradually reduced. Neutralization capability at this peak point is higher than that at reduced pressure about $10^4$ times on the atmospheric pressure and by about $10^3$ times on the inactive gas. The introductions of these technology make it possible to perfectly overcome problems caused by static electricity and to manufacture ULSI devices and LCD with high reliability.

• Ecology and Resilient Infrastructure
• /
• v.2 no.2
• /
• pp.167-176
• /
• 2015

The water quality of the Gulpo Stream flowing through Incheon, Bucheon, Seoul, and Kimpo is getting worse due to a slow flow rate and bank constructions by stream channelization as well as an inflow of pollutants from living-sewages and factory-sewages. Besides, a dry stream phenomenon caused by a lack of maintenance water upstream makes a self-purification system worse, and the water quality of the Gulpo Stream is currently at its lowest level. The accumulated sludge of the streambed is mostly formed by the deposition of particle pollutants due to the slow flow rate and an artificially straightened stream channel. This accumulated sludge adsorbs a great quantity of organic materials and heavy metals. Because of the internal contamination possibility by a re-gushing, even after the pollution source is removed, it can cause future water pollution. Without a total examination as previously recommended, it is considered difficult to accomplish practical efficiency. In conclusion, the management of periodic sediment management such as dredging would be necessary in the Gulpo Stream because sediment could be an internal pollution source of stream water under anaerobic conditions.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.10
• /
• pp.979-985
• /
• 2010

This study was performed to detect enterococci strain as an indicator of faecal contamination, to identify of 16S rDNA sequence and vancomycin resistance by MIC (Minimum Inhibitory Concentration) test from drinking spring-water samples in Seoul. The detection frequency of enterococci was 42 (19.8%) among 212 samples, and its concentration was ranged from 0 to 110 CFU/100 mL. These results were confirmed the possibility as an indicator microorganisms that similar to the frequency of E. coli detection (t test p-value 0.268, significant level 0.05). Isolated 56 enterococci samples were identified by 16S rDNA sequence data and their NCBI BLAST searching. They were identified to Enterococcus faecalis of 24 samples, E. faecium (10), E. casseliflavus (10), E. gallinarum (3), E. hirae (2), E. durans (2), E. sanguinicola (1). E. faecalis was dominant species that clinical case report of a domestic was similar. Vancomycin resistant enterococci (VRE) of 53 samples showed that vanB and vanC1/C2 type with 2 and 12 case, respectively. These results indicated that the drinking spring-water quarantined to fecal pollution for block out outbreak of gastrointestinal symptom with using such as disinfection process.

• Economic and Environmental Geology
• /
• v.31 no.3
• /
• pp.249-264
• /
• 1998

The Creataceous volcanic rocks distributed in the southeastern part (Kyeongsang basin) of Korea peninsula are composed of basalt, basaltic andesite, andesite, dacite and rhyolite. The variation of major elements show that contents of MgO, CaO, $FeO^T$, $Al_2O_3$, $TiO_2$ and $P_2O_5$ decrease with increasing of $SiO_2$, but $K_2O$ contents are increased slightly, $Na_2O$ widely dispersed. We can show slightly inflection point and low frequency of dacites in range between 63-65 wt.% $SiO_2$, while continuous trend exit in variation diagram. Variation trends in Harker diagrams for the major, minor, trace and REEs suggest that the BAV (basaltic to andesitic volcanics) and DRV (dacitic to rhyolitic volcanics) are not related to a simple crystal fractionation process. In the regime of under 65 wt. % in silica content, fractionation of olivine and clinopyroxene is predominant, while that of plagioclase happens strongly higher than 65 wt.% (e.g., $SiO_2$, vs. Eu and Sr, MgO vs. $Al_2O_3$ and CaO). The latter means low-pressure fractional crystallization for DRV. On the discriminant diagram, DRV are located in more mature environment than BAV. The $(Ce/Sm)_N$ vs. CeN digram shows that these two classes cannot be related to crystal fractionation. If they had been produced by fractionation, although they plotted in a slightly elongate cluster along the same horizontal trend, DRV should lie to the right of these primitive compositions. These diagrams clearly rule out a simple fractionation throughout from BAV to DRV. BAV had been influenced greatly subductiong slab as shown by K/Yb vs. Ta/Yb. We suggest that BAV primitive magma generated higher degree of partial melting than DRV primitive magma. LILE (K, Ba, $Rb{\pm}Th$) enriched characteristics as shown in BAV are inherited from subducting slab fluids and/or higher degree of partial melting of mantle material. However, lower degree of partial melting of mantle relative to BA V and contamination at high-level magma reservoir caused LILE enrichment to DRV.

• Journal of Soil and Groundwater Environment
• /
• v.14 no.5
• /
• pp.62-70
• /
• 2009

A field soil highly contaminated with petroleum hydrocarbons (JP-8 and diesel fuels) was employed for its remediation by a lab-scale thermal desorption process. The soil was collected in the vicinity of an underground storage tank in a closed military base and its contamination level was as high as 4,476 ppm as total petroleum hydrocarbon (TPH). A lab scale directly-heated low temperature thermal desorption (LTTD) system of 10-L capacity was developed and operated for the thermal treatment of TPH contaminated soils in this study. The desired operation temperature was found to be approximately $200-300^{\circ}C$ from the thermal gravimetric analysis of the contaminated field soils. The removal efficiencies higher than 90% were achieved by the LTTD treatment at $200^{\circ}C$ for 10 min as well as at $300^{\circ}C$ for 5 min. As the water content in the soils increased and therefore they were likely to be present as lumps, the removal efficiency noticeably decreased, indicating that a pre-treatment such as field drying should be required. The analysis of physical and chemical properties of soils before and after the LTTD treatment demonstrated that no significant changes occurred during the thermal treatment, supporting no needs for additional post-treatments for the soils treated by LTTD. The results presented in this study are expected to provide useful information for the field application and verification of LTTD for the highly contaminated geo-environment.

• Journal of Korean Society on Water Environment
• /
• v.23 no.2
• /
• pp.201-205
• /
• 2007

This paper reports the amount of $^{222}Rn$ and $^{238}U$ in 18 sites of ground water and 30 sites of surface water. The instrument used to count $^{222}Rn$ activity was the liquid scintillation counter (LSC) which could resolute ${\alpha}$ and ${\beta}$ radiations. And $^{238}U$ was analyzed by the inductively coupled plasma (ICP). Radon and Uranium were not detected in raw and treated water which were sampled in a water treatment plant. However, radon ($^{222}Rn$) was high concentration in ground water from Jeon-la, Gang-won. So was uranium ($^{238}U$) in case of ground water from Gang-won, Choong-chung. Radon ($^{222}Rn$) activities were detected less than 15 pCi/L at 5 sampling points, 15~300 pCi/L at 7 sampling points, 300~4000 pCi/L at 6 sampling points. However, Radon ($^{222}Rn$) activities of all ground water samples were less than 4,000 pCi/L, which was bellow American Alternative Maximum Contamination Level (AMCL). Uranium ($^{238}U$) concentrations were less than $0.1{\mu}g/L$ at 5 sampling points, from $0.1{\mu}g/L$ to $20{\mu}g/L$ at 13 sampling points. Uranium was not detected in about 30% of the whole samples, but the concentration ranged from relatively low to high concentrations depending on the sampling point. The minimum detectable activity (MDA) of radon was 15 pCi/L. and the detection limit of uranium was $0.1{\mu}g/L$.

• Journal of Radiation Industry
• /
• v.11 no.1
• /
• pp.1-6
• /
• 2017

Reported some level of bacteria in areas that are well made contact in Radiology imaging room evaluate the importance of cleanliness in the hospital management of equipment to check for the presence of pathogenic bacteria. Gwang-ju and Jeol-la city and medium-sized hospitals in the material with a cotton swab and rub evenly Radiology selection cassette, a handle, Apron of the imaging apparatus having the most contact with patients from July 2016 to August 2016 as a target in place and special studios 6, and saline solution will placed in a test tube containing. The swab sample was diluted 1,000 times, you can see the bacteria and the intestinal bacterial selective medium Trypticase Soy Agar (TSA), Muller-Hinton Agar (MHA), Eosin-Methylene Blue (EMB), ENDO(BD, NJ, USA) then incubated smear to. In the incubator (incubator, SANYO, Japan) was observed after incubation of bacteria and counting the total number of bacteria also Colonies (colony) suspected intestinal bacteria were isolated and cultured on KIA medium (BD, NJ, USA). As a result, it was found that this came Gram positive Coccus A hospital handle the F hospital, from the C Gram positive Coccus cassette and handle the F hospital. The striking yellow coloring Staphylococcus aureus 110 agar (STA 110) in the medium sample, but it is suspected staphylococcal Coccus to the final identification in the laboratory is not a single specimen of the two samples from Gram positive Coccus biochemical identification Identification Kit is an API could not, it was thought to be non-Staphylococcus aureus was cultured on blood agar suggesting that (BAP) blood of dance. Dynamic tests were conducted biochemical API kit of the two samples were identified from Gram positive Coccus bacteria Escherichia coli (E. coli) is F hospital cassette was confirmed Eenterobacter cloaca in A hospital possession. Did not aggregate O-26, O-111, O-157 and the serum test was conducted in the laboratory from the E. coli F cassette hospital.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.2
• /
• pp.164-171
• /
• 2007

This experiment was conducted to investigate heavy metal speciation and bioavailability from soil to the edible parts of water dropwort near industrial complex. The soils and water dropwort were collected from the paddies cultivating water dropwort(10 sites), stream sediments(5 sites), and background soils(3 sites) near industrial complex. The total concentrations of Cd Cu, and Ni were higher than those of permissible level for soil contamination(Cd 3, Cu 100, Ni $50mg\;kg^{-1}$ in soil) suggested by Kloke(1979). Dominant chemical forms of Cd in paddies cultivating water dropwort and stream sediments were exchangeable form(49.1-56.3%), and those of Cu, Zn, and Ni were Fe and Mn oxide bound and residual forms. The mobility factor of heavy metals in paddies cultivating water dropwort and stream sediments was in the order Cd>Zn>Ni>Cu>Pb, specially, the mobility factor of Cd (62-72%) were relatively higher than that of other metals in soils. The total concentrations of Cd in soils showed significant positive correlation with the ratios of exchangeable and Fe and Mn oxide bound forms, while correlated negatively with residual form. Heavy metal contents in root parts were higher than those in top parts of water dropwort. The bioavailability of water dropwort varied considerably between the different parts and heavy metals. Cd, Cu and Ni contents in water dropwort were correlated with each fractions in soils. Specially, the exchangeable form of Cd and Ni in soils showed significant positive correlation with the those contents of water dropwort.

• Korean Journal of Pharmacognosy
• /
• v.52 no.4
• /
• pp.219-227
• /
• 2021

By analysing the benzo(a)pyrene concentration using HPLC-FLD and LC-MS/MS, pollution levels of herbal medicines without permitted benzo(a)pyrene specification were investigated. Average benzo(a)pyrene concentrations were 38.30, 37.46 and 21.22 ㎍/kg for Amomi Tsao-ko Fructus, Mume Fructus and Coptidis Rhizoma, respectively, which are 4 to 7 times higher than maximum permitted benzo(a)pyrene concentration of Rehmanniae Radix Preparata and Rehmanniae Radix, i.e. 5.0 ㎍/kg. Proportion of detected samples exceeding 5.0 ㎍/kg benzo(a)pyrene concentration was 22% for Cimicifugae Rhizoma and Scrophulariae Radix, 44% for Forsythiae Fructus, 67% for Mume Fructus, 100% for Amomi Tsao-ko Fructus and Coptidis Rhizoma, and collectively 29% (36 out of 125 samples) in average. In terms of risk characterization results, human exposure of benzo(a)pyrene were 7.96, 3.49 and 1.61 ng/kg b.w./day and the margin of exposure(MOE) were 1.25 × 10⁴, 2.86 × 10⁴ and 6.20 × 10⁴ for Mume Fructus, Amomi Tsao-ko Fructus and Coptidis Rhizoma, respectively. MOE banding of those herbal medicines was categorized to 'low concern'. However, considering that human exposure of benzo(a)pyrene for food is legislated to 1.4~2.5 ng/kg b.w./day, it was urgent to set up the guideline of benzo(a)pyrene in herbal medicines.

• Membrane Journal
• /
• v.31 no.2
• /
• pp.87-100
• /
• 2021

With a striking increase in the level of contamination and subsequent degradations in the environment, detection and monitoring of contaminants in various sites has become a crucial mission in current society. In this review, we have summarized the current research areas in membrane-based colorimetric sensors for trace detection of various molecules. The researches covered in this summary utilize membranes composed of cellulose fibers as sensing platforms and metal nanoparticles or fluorophores as optical reagents. Displaying decent or excellent sensitivity, most of the developed sensors achieve a significant selectivity in the presence of interfering ions. The physical and chemical properties of cellulose membrane platforms can be customized by changing the synthesis method or type of optical reagent used, allowing a wide range of applications possible. Membrane-based sensors are also portable and have great mechanical properties, which enable on-site detection of contaminants. With such superior qualities, membrane-based sensors examined in the researches were used for versatile purposes including quantification of heavy metals in drinking water, trace detection of toxic antibiotics and heavy metals in environmental water samples. Some of the sensors exhibited additional features like antimicrobial ability and recyclability. Lastly, while most of the sensors aimed for a detection enabled by naked eyes through rapid colour change, many of them investigated further detection methods like fluorescence, UV-vis spectroscopy, and RGB colour intensity.