• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2019.11a
• /
• pp.193-194
• /
• 2019

Due to structural problems in the transportation market, such as fraudulent competition and multi-level transportation transactions, tariff are not properly refIected to the final trucker even if freight tariff are increased due to diesel price hikes and transportation cost increases. By Launched "standard tariff system" in 2017 based on the trucks, government would tried to guarantee the minimum tariff such that prevents overloading, speeding, and strain for trucker. However, It is necessary to analyze in advance the issue of the system and its impact on container freight. Thus, this study analyzes the issues and countermeasures related to the tariff system that is formed when the "Truck Safety Rates" is introduced, and also analyzes the influence factors of the expenditure cost on the container freight which is applied to the "Truck Safety Rates".

• Journal of Animal Science and Technology
• /
• v.60 no.1
• /
• pp.30.1-30.10
• /
• 2018

Background: The poultry industry suffers losses from problems as pale, soft and exudative (PSE), and dark, firm and dry (DFD) meat can develop in meat as a result of short- and long-term stress, respectively. These abnormalities are impacted by pre-slaughter animal welfare. Methods: This work evaluated the effects of open vehicle container microclimate, throughout the $38{\pm}10km$ journey from the farm to the slaughterhouse, on commercially turkey transported during the Brazilian winter season. The journey was initiated immediately after water bath in truck fitted with portable Kestrel anemometers to measure air ventilation, relative humidity, temperature and ventilation. Results: The inferior compartments of the middle and rear truck regions showed highest temperature and relative humidity, and lower air ventilation. In addition, the superior compartments of the front truck regions presented lower temperature and wind chill, and highest air ventilation. The breast meat samples from animals located at the inferior compartments of the middle and rear truck regions and subjected to with water bath (WiB) treatment presented highest DFD-like and had lowest PSE-like meat incidence than those from animals located at other compartments within the container. Lower incidence of PSE-like meat was observed in birds without water bath (WoB). Conclusions: Assessment on turkeys transported under Brazilian southern winter conditions revealed that breast meat quality can be affected by relative humidity, air ventilation, temperature, and transport under subtropical conditions promoting color abnormalities and the formation of simultaneously PSE-like and DFD-like meat.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.06a
• /
• pp.385-386
• /
• 2022

Currently, global developed countries in shipping and logistics establish smart ports by introducing various digital technologies such as automated terminals and sharing platforms. This means that the importance of efficiency throughout the port by improving resource utilization efficiency and minimizing work idle time is increasing. Therefore, this study proposes a yard truck dispatching method of improving resource utilization efficiency. And we analyze the problems of the existing dispatching rules and develop Y/T dispatching algorithm that comprehensively considers related constraints. In addition, the simulation takes into account the terminal congestion based on the operation data of the Busan New Port, it is conducted using the existing dispatch method and developed Y/T dispatching algorithm. And the operational effects of analysis result are evaluated.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2015.10a
• /
• pp.165-166
• /
• 2015

Due to the international economic downturn and the increasing competition, container terminals have been trying to achieve cost effectiveness and high service levels. Shipping companies want to get better services from container terminals but container terminals only have limited space and equipment. Frequently, too many external trucks come to the terminal at the same time, and create bottle necks at the terminals. Ouside the container terminals traffic jams occur as well. As a result, stakeholders need a vehicle booking system. By VBS, container terminals can plan efficiently in advance to avoid work delay and the truck drivers can finish their jobs quickly. This paper aims to search efficient models for the container terminals by using VBS.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1166-1170
• /
• 2010

In the case of railway freight, there's a lot of process at railway freight terminal. In these days, for operation efficiency improvement, Load/Unload planning is being carried out research. Load/unload problem can be classified as track assignment, container assignment, yard truck route problem, unload equipment scheduling, container yard plan. In this paper, we focus on track assignment and container assignment among the load/unload problem. we analysis information architecture to solve this problem. And we compares two precesses for existing method and optimization method of track/container assignment processes. An contents different analysis of two methods can shows reformation of an information architecture for load/unload process in the railway freight terminal.

• IE interfaces
• /
• v.20 no.4
• /
• pp.498-503
• /
• 2007

The synchronized operation of a quay crane(QC) and a transfer crane(TC) increases the productivity of a container terminal. In this paper, analytical models are suggested for the optimal number and the optimal operation of the yard trucks (YTs) which travel between a quay crane and a transfer crane in a container terminal. YT may represent yard tractor, AGV and shuttle carrier. The analytical models are so simple and useful that the analysis and the results of this paper can be used not only in container terminal practices but also in many other application fields.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1404-1409
• /
• 2003

The sway control problem of the pendulum motion of the container crane hanging on the trolley, which transports containers from the container ship to the truck, is considered in this paper. In the container crane control problem, the main issue is to suppress the residual swing motion of the container at the end of the acceleration, deceleration or the case of that the unexpected disturbance input exists. For this problem, in general, the trolley motion control strategy is introduced and applied to real plants. In this paper, we suggest a new type of swing motion control system for a crane system in which a small auxiliary mass is installed on the spreader. The actuator reacting against the auxiliary mass applies inertial control forces to the spreader of the container crane to reduce the swing motion in the desired manner. In this paper, we consider that the length of the rope varies is we design the anti-sway control system based on LMI(linear matrix inequality) approach. And, it will be shown that the proposed control strategy is useful and it can be easily applicable to the real world. So, in this study, we investigate usefulness of the proposed anti-sway system and evaluate system performance from simulation and experimental studies.

• Journal of Biosystems Engineering
• /
• v.30 no.2 s.109
• /
• pp.89-94
• /
• 2005

The compression strength of corrugated fiberboard container for packaging the agricultural products rapidly decreases because of various environmental conditions during distribution of unitized products. Among various environmental conditions, the main factors affecting the compression strength of corrugated fiberboard are absorption of moisture, long-term accumulative load, and fatigue caused by shock and vibration. An estimated rate of damage for fruit during distribution is about from 30 to 40 percent owing to the shock and vibration. This study was carried out to characterize the durability of corrugated fiberboard container for packaging the fruit and vegetables under simulated transportation environment. The vibration test system was constructed to simulate the land transportation using truck. After the package with corrugated fiberboard container was vibrated by vibration test system at various experimental conditions, the compression test for the package was performed. The compression strength of corrugated fiberboard container decreased with loading weight and vibrating time. The multiple nonlinear regression equation for predicting the decreasing rate of compression strength of corrugated fiberboard containers were developed using four independent variables such as input acceleration level, input frequency, loading weight and vibrating time. The influence of loading weight on the decreasing rate of corrugated fiberboard container was larger than other variables.

• Journal of Navigation and Port Research
• /
• v.29 no.8 s.104
• /
• pp.741-746
• /
• 2005

This paper proposes a method for designing layout on the yard and evaluating alternative designs of the layout by applying simulation The design method is based on the concepts of the conventional port container terminal with yard layout. In general, yard design of the container terminal consists of the two major parts. One is to divide yard area between the number of sections and runs and the other is to decide the number of equipment including yard truck and yard crane. In the past days, this design was depended on the experience of the terminal operator and the reproduction of the conventional terminal layout because it is a very complex problem to be considering facilities and equipments. In this paper, we suggest a design method as a conceptual procedure used simulation method The number of sections and runs on yard area, the number of yard truck per container crane, and the number of yard crane per run are decided using simulation In addition, the traffic flow among blocks on yard layout is estimated in terms of rate.

• Journal of Navigation and Port Research
• /
• v.35 no.8
• /
• pp.657-665
• /
• 2011

This study deals with an integrated problem for deciding sequencing and storage location of export containers together at its receiving operation in the container terminal with a perpendicular layout. The preferred storage location of an export container varies with the priority of the corresponding loading operation and the waiting time of an external truck depends on its storage time. This paper proposes the mixed integer programming model considering the expected arrival time and expected finish time of an external truck and the preferred storage location for its loading operation. And we suggest the heuristic algorithm based on a simulated annealing algorithm for real world adaption. We compare the heuristic algorithm with the optimum model in terms of the computation times and total cost and the performance of the heuristic algorithm is analyzed through a numerical experiment.