• 상하수도학회지
• /
• 제30권3호
• /
• pp.285-291
• /
• 2016

There has been an accelerating increase in water reuse due to growing world population, rapid urbanization, and increasing scarcity of water resources. However, it is well recognized that water reuse practice is associated with many human health and ecological risks due to numerous chemicals and pathogenic microorganisms. Especially, the potential transmission of infectious disease by hundreds of pathogenic viruses in wastewater is one of the most serious human health risks associated with water reuse. In this study, we determined the response of different bacteriophages representing various bacteriophage groups to chlorination in real wastewater in order to identify a more reliable bacteriophage indicator system for chlorination in wastewater. Different bacteriophages were spiked into secondary effluents from wastewater plants from three different geographic areas, and then subjected to various doses of free chlorine and contact time at $5^{\circ}C$ in a bench-scale batch disinfection system. The inactivation of ${\phi}X174$ was relatively rapid and reached ~4 log10 with a CT value of 5 mg/L*min. On the other hand, the inactivation of bacteriophage PRD1 and MS2 were much slower than the one for ${\phi}X174$ and only ~1 log10 inactivation was achieved by a CT value of 10 mg/L*min. Overall, the results of this study suggest that bacteriophage both MS2 and PRD1 could be a reliable indicator for human pathogenic viruses for chlorination in wastewater treatment processes and water reuse practice.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.1033-1036
• /
• 2002

Wafer bonding methods such as fusion and anodic bonding suffer from high temperature treatment, long processing time, and possible damage to the micro-scale sensor or actuators. In the localized bonding process, beating was conducted locally while the whole wafer is maintained at a relatively low temperature. But previous research of localized heating has some problems, such as non-uniform soldering due to non-uniform heating and micro crack formation on the glass capsule by thermal stress effect. To address this non-uniformity problem, a new heater configuration is being proposed. By keeping several points on the heater strip at calculated and constant potential, more uniform heating, hence more reliable wafer bonding could be achieved. The proposed scheme has been successfully demonstrated, and the result shows that it will be very useful in hermetic packaging. Less than 0.2 ㎫ contact Pressure were used for bonding with 150 ㎃ current input for 50${\mu}{\textrm}{m}$ width, 2${\mu}{\textrm}{m}$ height and 8mm $\times$ 8mm, 5mm$\times$5mm, 3mm $\times$ 3mm sized phosphorus-doped poly-silicon micro heater. The temperature can be raised at the bonding region to 80$0^{\circ}C$, and it was enough to achieve a strong and reliable bonding in 3minutes. The IR camera test results show improved uniformity in heat distribution compared with conventional micro heaters. For gross leak check, IPA (Isopropanol Alcohol) was used. Since IPA has better wetability than water, it can easily penetrate small openings, and is more suitable for gross leak check. The pass ratio of bonded dies was 70%, for conventional localized heating, and 85% for newly developed FP scheme. The bonding strength was more than 30㎫ for FP scheme packaging, which shows that FP scheme can be a good candidate for micro scale hermetic packaging.

• 한국재료학회지
• /
• 제9권9호
• /
• pp.890-895
• /
• 1999

본 연구에서는 SOI 구조를 이용한 50$\mu\textrm{m}$ 두계의 규소 태양전지의 이용 가능성과 제한사항을 제시하기 위하여, interdigitated contact을 이용한 전극을 형성하도록 전지를 설계한 후 단계별 사진공정을 통해 태양전지를 제조하였다. Bonded SOI wafer를 이용하여 제조된 50$\mu\textrm{m}$ 두께의 결정질 규소 태양전지의 효율은 전극간격이 1100$\mu\textrm{m}$과 base width가 35$\mu\textrm{m}$인 경우에서 11.5%로 가장 높은 값을 나타내었다. 또한 실험결과로부터 전면전극을 이용한 태양전지의 구조는 power loss를 최소화하는 최적의 base fraction을 적용하는 것이 필요하며, 전지의 효율은 fill factor에 강한 의존성을 나타내기 때문에 fill factor loss를 최소화하는 설계조건이 필요함을 알 수 있었다.

• 한국재료학회지
• /
• 제25권4호
• /
• pp.202-208
• /
• 2015

Alumina dispersion strengthening copper(ADSC) alloy has great potential for use in many industrial applications such as contact supports, frictional break parts, electrode materials for lead wires, and spot welding with relatively high strength and good conductivity. In this study, we investigated the oxidation behavior of ADSC alloys. These alloys were fabricated in forms of plate and round type samples by surface oxidation reaction using Cu-0.8Al, Cu-0.4Al-0.4Ti, and Cu-0.6Al-0.4Ti(wt%) alloys. The alloys were oxidized at $980^{\circ}C$ for 1 h, 2 h, and 4 h in ambient atmosphere. The microstructure was observed with an optical microscope(OM) and a scanning electron microscope(SEM) equipped with energy-dispersive X-ray spectroscopy(EDS). Characterization of alumina was carried out using a 200 kV field-emission transmission electron microscope(TEM). As a result, various oxides including Ti were formed in the oxidation layer, in addition to ${\gamma}$-alumina. The thickness of the oxidation layer increased with Ti addition to the Cu-Al alloy and with the oxidation time. The corrected diffusion equation for the plate and round type samples showed different oxidation layer thickness under the same conditions. Diffusion length of the round type specimen had a value higher than that of its plate counterpart because the oxygen concentration per unit area of the round type specimen was higher than that of the plate type specimen at the same diffusion depth.

• 한국재료학회지
• /
• 제25권5호
• /
• pp.233-237
• /
• 2015

Silicon oxynitride that can be deposited two times faster than general SiNx:H layer was applied to fabricate the passivation protection layer of atomic layer deposition (ALD) $Al_2O_3$. The protection layer is deposited by plasma-enhanced chemical vapor deposition to protect $Al_2O_3$ passivation layer from a high temperature metallization process for contact firing in screen-printed silicon solar cell. In this study, we studied passivation performance of ALD $Al_2O_3$ film as functions of process temperature and RF plasma effect in plasma-enhanced chemical vapor deposition system. $Al_2O_3$/SiON stacks coated at $400^{\circ}C$ showed higher lifetime values in the as-stacked state. In contrast, a high quality $Al_2O_3$/SiON stack was obtained with a plasma power of 400 W and a capping-deposition temperature of $200^{\circ}C$ after the firing process. The best lifetime was achieved with stack films fired at $850^{\circ}C$. These results demonstrated the potential of the $Al_2O_3/SiON$ passivated layer for crystalline silicon solar cells.

• Current Photovoltaic Research
• /
• 제3권3호
• /
• pp.85-90
• /
• 2015

Two-step processes for preparing $Cu(In,Ga)Se_2$ absorber layers consist of precursor layer formation and subsequent annealing in a Se-containing atmosphere. Among the various deposition methods for precursor layer, the nonvacuum (wet) processes have been spotlighted as alternatives to vacuum-based methods due to their potential to realize low-cost, scalable PV devices. However, due to its porous nature, the precursor layer deposited on Mo substrate by nonvacuum methods often suffers from thick $MoSe_2$ formation during selenization under a high Se vapor pressure. On the contrary, selenization under a low Se pressure to avoid $MoSe_2$ formation typically leads to low crystal quality of absorber films. Although TiN has been reported as a diffusion barrier against Se, the additional sputtering to deposit TiN layer may induce the complexity of fabrication process and nullify the advantages of nonvacuum deposition of absorber film. In this work, Mo oxide layers via thermal oxidation of Mo substrate have been explored as an alternative diffusion barrier. The morphology and phase evolution was examined as a function of oxidation temperature. The resulting Mo/Mo oxides double layers were employed as a back contact electrode for $CuInSe_2$ solar cells and were found to effectively suppress the formation of $MoSe_2$ layer.

• 공업화학
• /
• 제23권1호
• /
• pp.65-70
• /
• 2012

소재의 물리적 변형을 야기할 수 있는 구조 변화 분자에 관한 연구는 잠재적인 응용 분야가 다양하며 매우 흥미로운 분야이다. 특히, 광응답성 물질은 비접촉식 에너지 전달이 가능하여 비파괴, 국소 조사, 원격 제어가 가능하다. 본 논문에서는 광응답성 물질인 아조 발색단의 고분자 내 위치에 따른 물리적, 광학적 성질을 조사하고, 이를 수용성 젤인 폴리비닐알코올에 분산시켜 자외선-가시광선 조사에 따른 이중 안정성 거동을 조사하였다. 신축 배향된 아조벤젠 고분자에 비편광 자외선을 상온에서 조사하여 비등방성 광변형을 시연한 결과, 아조벤젠 고분자 블렌드의 물리적 변형 성능은, 이제까지 보고되었던 많은 아조벤젠 가교 액정 탄성체의 광변형 성능보다 우수한 것으로서, 곁가지 아조벤젠 고분자 필름의 $15^{\circ}$ 구부러짐 변형이 상온에서도 관찰될 정도로 매우 뛰어나며 그 변형이 가역적이었다. 이와 같이, 화학적 접근 방식보다 쉽게 얻을 수 있는 아조벤젠/고분자 블렌드 필름의 성능이 매우 우수하여, 치수 변형이 필요한 다양한 시스템에 응용할 수 있다.

• Journal of Biosystems Engineering
• /
• 제40권2호
• /
• pp.145-152
• /
• 2015

Purpose: The inability to adequately judge the efficacy of cleaning and sanitation procedures in deli departments is a recognized food safety concern. In a prior study, our research group demonstrated that visual inspection of cleaned produce processing surfaces could be enhanced through the use of a portable fluorescence imaging device that detected residual produce residues. Methods: To explore the feasibility of using fluorescence imaging to similarly detect residual deli residues, spectra of American, Cheddar, Provolone, and Swiss cheeses and of processed chicken, ham, roast beef, and turkey were acquired using a laboratory hyperspectral imaging system. Circular punches of these commodities were placed onto stainless steel and high density polyethylene coupons for imaging. The coupon materials were selected to represent common surfaces found in deli departments. Results: Analysis of hyperspectral fluorescence images showed that cheeses exhibited peaks in the blue-green region and at around 675 nm. Meats exhibited peaks in the blue-green region with one of four ham and one of four chicken brands exhibiting peaks at around 675 nm, presumably due to use of plant-derived additives. When commodities were intermittently imaged over two weeks, locations of spectral peaks were preserved while intensity of peaks at shorter wavelengths increased with time. Conclusion: These results demonstrate that fluorescence imaging techniques have the potential to enhance surface hygiene inspection in deli departments and, given the immediate availability of imaging results, to help optimize routine cleaning procedures.

• 한국재료학회지
• /
• 제30권9호
• /
• pp.447-452
• /
• 2020

In this work, α-Fe₂O₃ nanocrystals are synthesized by co-precipitation method and used as adsorbent to remove Cr⁶⁺, Cd²⁺, and Pb²⁺ from wastewater at room temperature. The prepared sample is evaluated by XRD, BET surface area, and FESEM for structural and morphological characteristics. XRD patterns confirm the formation of a pure hematite structure of average particle size of ~ 40 nm, which is further supported by the FESEM images of the nanocrystals. The nanocrystals are found to have BET specific surface area of ~ 39.18 m² g^-1. Adsorption experiments are carried out for the different values of pH of the solutions, contact time, and initial concentration of metal ions. High efficiency Cr⁶⁺, Cd²⁺, and Pb²⁺ removal occur at pH 3, 7, and 5.5, respectively. Equilibrium study reveals that the heavy metal ion adsorption of the α-Fe₂O₃ nanocrystals followed Langmuir and Freundlich isotherm models. The Cr⁶⁺, Cd²⁺, and Pb²⁺ adsorption equilibrium data are best fitted to the Langmuir model. The maximum adsorption capacities of α-Fe₂O₃ nanocrystals related to Cr⁶⁺, Cd²⁺, and Pb²⁺ are found to be 15.15, 11.63, and 20 mg g^-1, respectively. These results clearly suggest that the synthesized α-Fe₂O₃ nanocrystals can be considered as potential nano-adsorbents for future environmental and health related applications.

• 태양에너지
• /
• 제18권3호
• /
• pp.185-195
• /
• 1998

본 연구는 태양열을 이용한 냉난방 공조시스템 개발 중 작동매체인 저농도의 염화리튬(lithium chloride) 용액을 고농도로 변환시키는 재생기의 최적 재생면을 파악하는 데 그 목적이 있다. 염화리튬 용액은 점성이 강하기 때문에 재생기의 상부로부터 하부로 유하될 때 편류(Channeling)현상을 발생하게 된다. 이 편류현상은 재생기에서의 열 및 물질전달을 방해하여 재생량을 감소시킨다. 결국 재생기의 성능, 나아가서는 태양열 이용 냉난방 공조시스템 전체의 성능이 염화리튬용액을 얼마나 균일하게 유하할 수 있는 가에 달렸다고 해도 과언은 아니다. 따라서 본 연구에서는 재생면의 다양한 형태와 구조를 고안해서 실제로 재생면을 제작하여 재생면의 최적 구조를 규명하였다. 실험을 위하여 가로 50cm, 세로 50cm 크기인 간이 재생기를 직접 제작하여 항온항습실에서 실험을 행하였다. 그 결과 평판 위에 높이 4.5mm 폭 10mm의 계단형 구조를 갖는 재생면에서 최대의 재생량을 얻을 수 있었다.