• 자원환경지질
• /
• 제31권4호
• /
• pp.311-324
• /
• 1998

Paleomagnetic study is carried out to investigate the possibility of remagnetization by dikes in the Cretaceous Gyeongsang Basin. We selected a site for a contact test as a preliminary study, and collected 41 core samples (7 from andesitic dike, 17 from sedimentary rock on the left side of dike and 17 from sedimentary rock on the right side). Magnetite was responsible for the remagnetization based on microscopic observation and demagnetization analysis. Although the increasement of magnetic susceptibility appears on both sides about 100 cm from the dike, the increment of NRM intensity was obtained from the specimens on the left side only. This is interpreted that the size of magnetite newly formed is dominated by superparamagnetic grains in the right side, but by larger than single-domain grains in the left. Reversed polarity component remagnetized by intrusion of dike was also found only for core samples from 116 cm left side of dike but abscent from right side indicating the remagnetization by the dike depends on the geometric shape and width of the dike, which is supported by field observations. The content of epidote is well correlated with remagnetization, and indicates the hydrothermal alteration/metameorphism was activated by the intrusion. We concluded that the above evidences in this study further support thermally-activated chemical origin of the remagnetization with meager contribution of contact metamorphism, and that any significant evidence of regional-scaled remagnetization was not found in the study area.

• 한국위성정보통신학회논문지
• /
• 제10권3호
• /
• pp.89-93
• /
• 2015

본 연구에서는 이온빔 처리된 $HfO_2$ 박막을 이용한 액정디스플레이의 프리틸트각을 제어함으로써, 작은 구동전압에서도 안정적으로 구동할 수 있는 디스플레이 소자에 응용할 수 있는 특성을 연구하였다. $HfO_2$ 박막의 원자 수준의 증착을 통해서 높은 유전율의 박막을 제조할 수 있었으며, 이는 저전력 구동을 위해서 필수적인 요소라고 생각한다. 또한 이러한 $HfO_2$ 박막의 액정배향성을 확인하여 균일한 액정배향을 통해서 디스플레이 소자로의 응용가능성을 확인하였다. 특히 $HfO_2$ 박막에서의 액정배향성에 대해서 액정배향의 대표적인 특성인 프리틸트각의 제어를 실험을 통해서 확인하였다. 실험결과 이온빔처리를 한 $HfO_2$ 박막에서의 액정배향의 특성을 접촉각특성을 대표화하여 정량화 할 수 있었다. 본 연구의 결과 액정의 배향성 확보 및 프리틸트각을 제어할 수 있는 고유전율 $HfO_2$ 박막의 제조가 가능한 것을 확인할 수 있었으며, 고유전율 특성에서 기인하는 저전력 구동의 가능성을 확인할 수 있었다.

• 한국재료학회지
• /
• 제23권1호
• /
• pp.53-58
• /
• 2013

Superhydrophobic $SiO_2$ layers with a micro-nano hierarchical surface structure were prepared. $SiO_2$ layers deposited via an electrospray method combined with a sol-gel chemical route were rough on the microscale. Au particles were decorated on the surface of the microscale-rough $SiO_2$ layers by use of the photo-reduction process with different intensities ($0.11-1.9mW/cm^2$) and illumination times (60-240 sec) of ultraviolet light. With the aid of nanoscale Au nanoparticles, this consequently resulted in a micro-nano hierarchical surface structure. Subsequent fluorination treatment with a solution containing trichloro(1H,2H,2H,2H-perfluorooctyl)silane fluorinated the hierarchical $SiO_2$ layers. The change in surface roughness factor was in good agreement with that observed for the water contact angle, where the surface roughness factor developed as a measure needed to evaluate the degree of surface roughness. The resulting $SiO_2$ layers revealed excellent repellency toward various liquid droplets with different surface tensions ranging from 46 to 72.3 mN/m. Especially, the micro-nano hierarchical surface created at an illumination intensity of $0.11mW/cm^2$ and illumination time of 60 sec showed the largest water contact angle of $170^{\circ}$. Based on the Cassie-Baxter and Young-Dupre equations, the surface fraction and work of adhesion for the micronano hierarchical $SiO_2$ layers were evaluated. The work of adhesion was estimated to be less than $3{\times}10^{-3}N/m$ for all the liquid droplets. This exceptionally small work of adhesion is likely to be responsible for the strong repellency of the liquids to the micro-nano hierarchical $SiO_2$ layers.

• 한국컴퓨터정보학회논문지
• /
• 제13권3호
• /
• pp.225-236
• /
• 2008

본 연구는 국제물류시장에서 활동하고 있는 복합운송주선업체가 기존 고객과 지속적인 거래관계를 유지하기 위해 어떤 요인이 중요한지 규명하기 위하여 관계마케팅의 개념과 도구를 적용하여 실증적으로 분석하였다. 연구결과, 고객과 지속적인 관계 지향적인 활동요인으로서 고객과 접촉강도(contact identity with customer), 상호개방성(two-way communication), 협력적 의도(cooperative intention)는 거래관계의 지속성(relationship continuity)에 정(+)의 영향을 미치는 것으로 나타났다. 추가로 구매방식(온라인/오프라인 의존도)과 서비스의 형태(표준과 맞춤형)의 상황별 분석에 있어서는 서비스의 형태별로는 거래의 지속성에 차이가 없었으나, 구매방식별로는 차이가 있는 것으로 나타나 오프라인 거래방식보다 온라인 거래방식 의존도가 높은 경우 거래관계의 지속성을 확보하는데 필요한 별도의 마케팅 전략을 수립하여 실행에 옮길 필요성을 제기하였다. 아울러 복합운송주선업체가 관계마케팅을 활용하는데 따른 시사점과 향후 연구 과제를 제시하였다.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 춘계 기술심포지움 논문집
• /
• pp.193-197
• /
• 2002

The tribological properties and van der Waals attractive forces and the thermal stability of films are very important characteristics of highly hydrophobic fluorocarbon (FC) films for the long-term reliability of nano system. The effect of thermal annealing on films and van der Waals attractive forces and friction coefficient of films have been investigate d in this study. It was coated Al wafer which was treated O2 and Ar that ocatfluorocyclobutane ($C_4_{8}$) and Ar were supplied to the CVD chamber in the ratio of 2:3 for deposition of FC Films. Static contact angle and dynamic contact angle were used to characterize FC films. Thickness of films was measured by variable angle spectroscopy ellipsometer (VASE). Nanotribological data was got by atomic force microscopy (AFM) to measure roughness, lateral force microscopy (LFM) to measure friction force, and force vs. distance (FD) curve to evaluate adhesion force. FC films were cured in N2 and vacuum. The film showed the slight changes in its properties after 3 hr annealing. FTIR ATR studies showed the decrease of C-F peak intensity in the spectra as the annealing time increased. A significant decrease of film thickness has been observed. The friction force of Al surface was at least thirty times higher than ones with FC films. The adhesive force of bare Al was greater than 100 nN. After deposit FC films adhesive force was decreased to 40 nN. The adhesive force of films was decreased down to 10 nN after 24 hr annealing. During 24 hr annealing in $N_2$and vacuum at $100^{\circ}C$ film properties were not changed so much.

• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.78-87
• /
• 2016

Red blood cells (RBCs) are customarily adhered to a bio-functionalised substrate to make them stationary in interferometric phase-imaging modalities. This can make them susceptible to receive alterations in innate morphology due to their own weight. Optical tweezers (OTs) often driven by Gaussian profile of a laser beam is an alternative modality to overcome contact-induced perturbation but at the same time a steeply focused laser beam might cause photo-damage. In order to address both the photo-damage and substrate adherence induced perturbations, we were motivated to stabilize the RBC in OTs by utilizing a laser beam of ‘arbitrary intensity profile’ generated by a source having cavity imperfections per se. Thus the immobilized RBC was investigated for phase-imaging with sinusoidal interferograms generated by a compact and robust Michelson interferometer which was designed from a cubic beam splitter having one surface coated with reflective material and another adjacent coplanar surface aligned against a mirror. Reflected interferograms from bilayers membrane of a trapped RBC were recorded and analyzed. Our phase-imaging set-up is limited to work in reflection configuration only because of the availability of an upright microscope. Due to RBC’s membrane being poorly reflective for visible wavelengths, quantitative information in the signal is weak and therefore, the quality of experimental results is limited in comparison to results obtained in transmission mode by various holographic techniques reported elsewhere.

• Journal of Biosystems Engineering
• /
• 제40권3호
• /
• pp.296-304
• /
• 2015

Purpose: The balance between miscanthus production and its cost effectiveness depends greatly on its moisture content during post processing. The objective of this research was to measure the moisture content using a non-destructive and non-contact methodology for in situ applications. Methods: The moisture content of comminuted miscanthus was controlled using a closed chamber, a humidifier, a precision weigher, and a real-time monitoring software developed in this research. A CMOS sensor equipped with $50{\times}$ magnifier lens was used to capture magnified images of the conditioned materials with moisture content level from 5 to 30%. The hypothesis is that when light is incident on the comminuted particles in an inclined manner, higher moisture content results in light being reflected with a higher intensity. Results: A linear regression analysis for an initiative hypothesis based on general histogram analysis yielded insufficient correlations with low significance level (<0.31) for the determination coefficient. A significant relationship (94% confidence level) was determined at level 108 in a reverse accumulative histogram proposed based on a revised hypothesis. A linear regression model with the value at level 108 in the reverse accumulative histogram for a magnified image as the independent variable and the moisture content of comminuted miscanthus as the dependent variable was proposed as the estimation model. The calibrated linear regression model with a slope of 92.054 and an offset of 32.752 yielded 0.94 for the determination coefficient (RMSE = 0.2%). The validation test showed a significant relationship at the 74% confidence level with RMSE 6.4% (n = 36). Conclusions: To compensate the inconsistent significance between calibration and validation, an estimation model robust against various systematic interferences is necessary. The economic efficiency of miscanthus, which is a promising energy resource, can be improved by the real-time measurement of its crucial material properties.

• Composites Research
• /
• 제16권3호
• /
• pp.25-31
• /
• 2003

본 연구에서는 화학적 표면처리에 따른 탄화규소(SiC)의 표면특성 변화가 탄소섬유강화 에폭시 복합재료의 열안정성 및 기계적 계면물성에 미치는 영향을 조사하였다. 표면처리된 탄화규소의 표면특성은 산ㆍ염기도와 접촉각 측정을 통하여 알아보았으며, 열안정성은 TGA를 이용하여 조사하였다. 제조한 복합재료의 기계적 계면물성은 ILSS와 임계세기인자($\textrm{K}_{IC}$), 그리고 critical strain energy release rate($\textrm{G}_{IC}$)를 통하여 고찰하였다. 실험 결과 산 처리된 SiC(A-SiC)는 미처리된 SiC(V-SiC)나 염기처리된 SiC(B-SiC)에 비하여 산도가 증가하였다. 접촉각 측정 결과, 화학적 표면처리는 극성요소의 증가에 기인하는 SiC의 표면자유에너지를 증가시켰다. 이와 같은 물성들은 양극산화로 향상되어졌는데, 이는 좋은 젖음성이 최종 복합재료의 섬유와 매트릭스 사이의 계면결합력을 증가시키는데 중요한 역할을 하기 때문인 것으로 사료된다.

• 지질공학
• /
• 제22권2호
• /
• pp.173-183
• /
• 2012

본 연구에서는 응력완화실험을 통한 포화상태에서의 토노(Tono) 화강암의 표면변형에 대한 연구를 수행하였다. 본 실험을 위해서 실험이 진행되는 동안 실시간으로 다초첨 레이져 스캔 현미경(Confocal Laser Scanning Microscope, CLSM)으로 관찰이 가능하고 변위 및 응력에 대한 데이터 취득이 가능한 장치를 고안하였다. 광물내의 변형 및 광물경계부에서의 변형은 유한요소해석 방법을 사용하여 계산하였다. 그 결과 응력완화실험 중에는 광물 내부와 광물 경계부 모두에서 활발한 변형을 보이는 것이 관찰되었으며 이는 가해지는 응력이 높아질수록 더욱 커진다는 사실을 확인하였다. 또한 유한요소 해석의 결과는 광물내의 변화보다는 압축력에 의해서 발생되는 광물경계부에서의 변화가 더욱 크다는 것을 설명한다. 이를 도식화시켜 표현해보면 화강암 내부에서 광물 경계부의 변형이 광물 내부의 변형보다 크게 나타난다는 것을 쉽게 관찰 할 수 있다. 이는 흑운모와 석영의 물리화학적 특성에 기인된다고 사료된다. 즉 석영은 안정된 구체를 보이는 반면에 흑운모는 층상형태로 약한 결합구조를 보이고 있기 때문으로 판단된다.

• 공업화학
• /
• 제23권3호
• /
• pp.313-319
• /
• 2012

본 연구에서는 Polyacrylonitrile (PAN)계 탄소섬유 표면에 구리도금 표면처리가 탄소섬유 강화 복합재료의 기계적 계면 특성에 미치는 영향에 관하여 관찰하였다. 탄소섬유 표면특성은 주사전자현미경, X-선 광전자 분광법, X-선 회절분석기, 접촉각 측정기로 측정하였고, 탄소섬유 강화 복합재료의 기계적 계면 물성은 층간전단강도(interlaminar shear strength, ILSS)와 파괴인성(critical stress intensity factor, $K_{IC}$)측정을 통하여 알아보았다. 실험결과로부터, 기계적 계면물성은 탄소섬유 표면에 COOH group과 도금된 구리함량이 증가됨에 따라 순차적으로 증가되는 것이 확인되었으나, 도금시간을 길게 하여 과량의 구리가 도입되었을 경우 기계적 계면 물성을 도리어 감소시키는 것으로 확인되었다. 결론적으로 구리함량이 탄소섬유 복합재료의 기계적 계면물성을 결정하는 중요 요소라 판단되나, 최적의 함량이상에서는 계면분리에 의한 물성저하의 원인이 될 수 있다.