• 자원환경지질
• /
• 제4권3호
• /
• pp.113-119
• /
• 1971

The Daeheung Dolomite Mine, which is about 6km south of Danyang, Chungcheongbugdo, is coincided with almost central portion of the Danyang quardrangle scaled in 1 : 50,000. The purpose of this report is to prepare a information for the economic evaluation on the mine. Geology of the region is composed of worm-eaten limestone, crystalline limestone, crystalline dolomite rock, sandstone and shale from bottom, those are applicable to socalled Dumugol and Maggol formation of Ordovician, and batholithic biotite granite is intruded the west-side of the ditto sedimentary rocks. The dolomite bed, emplaced in bottom of the upper limestone formation, so-called Maggol formation, is about 270m in thickness, and dips $30^{\circ}{\sim}50^{\circ}$ northwest. The facies of the dolomite rock contained many brucite crystals is not only coarse-grained crystalline, but also micro crystalline in contact metasomatic parts. 25 samples were taken from the two series, A and B, in the nearly crossed direction to the strike of the dolomite bed as shown in the geological map. They were chemically analysed on the components of MgO, CaO, and $SiO_2$ as shown in Table 2. The estimate ore reserves total some 107,200,000 metric tons above the 320m level with the following average contents: MgO 21.80%, CaO 29.27% and $SiO_2$ 0.64%. It is caused by brucite minerals that MaO content in the dolomite rock is higher than pure dolomite (21.7%). The dolomite ore is possible in use for magnesian fertilizer, magnesian cement and refractory material, especially the microcrystalline dolomite ore is useful for a refractory material in furnaces of iron industries.

• 한국염색가공학회지
• /
• 제26권2호
• /
• pp.88-98
• /
• 2014

This study is to assess the photocatalytic degradation of PET and Nylon 6 films containing nano-sized $TiO_2$ powders of anatase and rutile types. The PET and Nylon 6 films containing six kinds of the nanoparticles were prepared by melt casting method using a heating press machine. Reflectance in visible region and water contact angles of the irradiated PET and Nylon 6 composite films decreased with increasing UV/$O_3$ irradiation. Also the enhanced hydrophilicity has a close relationship with the increase in the Lewis base parameter, which indicates more oxidized polymer surfaces. The photocatalytic degradation of the nanocomposite films increased with increasing $TiO_2$ content and UV energy, which is more significant with the anatase types rather than the rutile types. The amide linkages in the Nylon 6 seemed to be more susceptible to the UV light compared to the ester groups in the PET, particularly in the presence of the $TiO_2$ photocatalysts. The photoscission and photodegradation of the polymers in the composites produced more degraded structure assisted by the photocatalytic activity of the $TiO_2$ nanoparticles. Also the composite films can bleach the methylene blue dyes more easily under the UV/$O_3$ irradiation, suggesting the photobleaching activity of the $TiO_2$ nanoparticles.

• 감성과학
• /
• 제11권1호
• /
• pp.23-37
• /
• 2008

본 연구의 목적은 성인여성의 인구통계적 변인에 따른 신체만족도, 욕구, 의복가치관의 차이를 조사하고, 인구통계적 변인, 신체만족도, 욕구의 변인이 의복가치관에 미치는 영향을 규명하는 데 있다. 본 연구는 인구통계적 변인에 따른 신체만족도, 욕구, 의복가치관의 차이를 알아보기 위하여 one-way ANOVA분석과 $Scheff{\acute{e}}$검증을 하였으며, 인구통계적 변인, 신체만족도, 욕구의 변인이 의복가치관에 미치는 영향을 알아보기 위하여 다중회귀분석을 실시하였다. 조사대상자는 경남지역에 거주하는 20-50대 사이의 성인여성 436명이었으며, 연구결과를 요약하면 다음과 같다. 인구통계적 변인에 따른 신체만족도, 욕구, 의복가치관은 부분적으로 유의미한 차이를 보였고, 특히 미디어접촉도는 신체만족도, 욕구, 의복가치관에 미치는 가장 중요한 요인으로 드러났다. 그러나 수입과 직업유무는 의복가치관의 어떠한 하위변인에서도 차이를 나타내지 않았다. 또한 의복가치관은 인구통계적 변인, 신체만족도, 욕구가 부분적으로 영향을 미치는 변수임을 알 수 있었다.

• 자원환경지질
• /
• 제53권3호
• /
• pp.259-269
• /
• 2020

The use of the geophysical method in mining prospecting has been studied in the Asdaf region (South-East of Morocco). The objective of the study is to examine the aptitude of the electrical technique, in this case induced polarization (IP) and electric tomography, combined with the electromagnetic method (VLF), in the exploration of barite . The result obtained by the pseudo-sections of electrical tomography and that of KH filtration highlighted anomalies of resistant contact (greater than 400Ω.m) and of high charge chargeability (5mV / V). These contacts are hosted in less resistant Devonian age shale and sandstone. The resistivity response obtained at their level is characteristic of the venous structures associated with barite mineralization. The direction of the mineralized veins is parallel to the direction of the fractured zones (NE-SW), which indicates that the mineralization in place is due to the tectonic movements of the Hercynian orogeny (from Devonian to Permian). These veins are aligned with the locations of abandoned mine shafts and with surface mining areas. Geophysical technique therefore seems to play a key role in barite mining exploration.

• 대한치과보철학회지
• /
• 제44권4호
• /
• pp.414-420
• /
• 2006

Purpose : The purpose of this study is to use finite element analysis to predict the fatigue life of an implant system subjected to fatigue load by mastication (chewing force). The reliability and the stability of implant system can be defined in terms of the fatigue strength. Not only an implant is expensive but also it is almost impossible to correct after it is inserted. From a bio-engineering standpoint, the fatigue strength of the dental implant system must be evaluated by simulation (FEA). Material and Methods Finite element analysis and fatigue test are performed to estimate the fatigue strength of the implant system. Mesh of implant is generated with the actual shape and size. In this paper, the fatigue strength of implant system is estimated. U-fit (T. Strong, Korea, internal type). The stress field in implant is calculated by elastic-plastic finite element analysis. The equivalent fatigue stress, considering the contact and preload stretching of a screw by torque for tightening an abutment, is obtained by means of Sine's method. To evaluate the reliability of the calculated fatigue strength, fatigue test is performed. Results: A comparison of the calculated fatigue strength with experimental data showed the validity and accuracy of the proposed method. The initiation points of the fatigue failure in the implant system exist in the region of high equivalent fatigue stress values. Conclusion: The above proposed method for fatigue life estimation tan be applied to other configurations of the differently designed and improved implant. In order to prove reliability of prototype implant, fatigue test should be executed. The proposed method is economical for the prediction of fatigue life because fatigue testing, which is time consuming and precision-dependent, is not required.

• Steel and Composite Structures
• /
• 제19권6호
• /
• pp.1561-1580
• /
• 2015

No significant improvement has been observed on the seismic performance of the ordinary steel reinforced concrete (SRC) columns compared with the reinforced concrete (RC) columns mainly because I, H or core cross-shaped steel cannot provide sufficient confinement for core concrete. Two improved SRC columns by constructing with new-type section steel were put forward on this background: a cross-shaped steel whose flanges are in contact with concrete cover by extending the geometry of webs, and a rotated cross-shaped steel whose webs coincide with diagonal line of the column's section. The advantages of new-type SRC columns have been proved theoretically and experimentally, while construction measures and seismic behavior remain unclear when the new-type columns are joined onto SRC beams. Seismic behavior of SRC joints with new-type section steel were experimentally investigated by testing 5 specimens subjected to low reversed cyclic loading, mainly including the failure patterns, hysteretic loops, skeleton curves, energy dissipation capacity, strength and stiffness degradation and ductility. Effects of steel shape, load angel and construction measures on seismic behavior of joints were also analyzed. The test results indicate that the new-type joints display shear failure pattern under seismic loading, and steel and concrete of core region could bear larger load and tend to be stable although the specimens are close to failure. The hysteretic curves of new-type joints are plumper whose equivalent viscous damping coefficients and ductility factors are over 0.38 and 3.2 respectively, and this illustrates the energy dissipation capacity and deformation ability of new-type SRC joints are better than that of ordinary ones with shear failure. Bearing capacity and ductility of new-type joints are superior when the diagonal cross-shaped steel is contained and beams are orthogonal to columns, and the two construction measures proposed have little effect on the seismic behavior of joints.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.874-882
• /
• 2008

전차선로와 팬터그래프로 이루어진 집전계에서 두 계 사이의 기계적 상호 작용이나 이선과 같은 집전 특성은 직접 현장 시험을 통하여 확인하는 것이 가장 정확하고 확실한 방법이며, 꼭 필요한 것으로 여겨지고 있다. 그러나 고속이 될수록 집전 성능을 직접 현장에서 시험을 통하여 실시하는 것은 경제적으로나 현실적으로 불가능한 경우가 대부분이다. 그래서 대안으로 시뮬레이션 방법이 이용되기는 하나 이것은 현장 시험을 대체하는 방법이 아닌 하나의 보조적인 방법에 불과하다. 그래서 대안으로 컴퓨터를 이용한 시뮬레이션 방법이 이용되고 있다. 그러나 이것은 유용한 방법이긴 하나 현장 시험을 대체하는 방법이 아닌 하나의 보조적인 방법으로 간주되고 있는 것이 일반적인 관점이다. 그래서 실제 속도의 현장 시험에 대한 하나의 대안으로 속도 축척 모형의 집전계 주행시험기를 이용하는 방법이 있다. 이것은 실제 속도의 1/2이나 1/4 정도의 속도에서 시험을 하면서 실제 속도에서의 특성을 확인하는 시험 방법이다. 본 논문에서는 이 속도 축척 모형 시험의 세부적인 시험 방법과 시험 설비에 대하여 알아본다. 그리고 이 방법으로 시험하였을 때 나타나는 성능이 실제 속도에서의 성능을 어느 정도 가깝게 나타내는지를 파악해 보고자 특정 속도와 조건을 선정하여 전차선로-집전계 사이의 동역학 시뮬레이션을 실시하여 보았다. 시뮬레이션 결과 특정 조건이 갖추어진다면 이 속도 축척 모형 시험 방법이 효용성이 있음을 확인할 수 있었다.

• 전자공학회논문지CI
• /
• 제41권3호
• /
• pp.103-114
• /
• 2004

본 논문은 3차원 공간상에서 행해지는 수신호들을 인식하는 시스템을 다룬다. 수신호 입력을 위한 장치로는 두 대의 컬러카메라를 사용한다. 비전에 기반을 둔 제스처 인식 방식은 그 자체의 비접촉식 특성으로 인해 사용자 편의 면에서 우수한 것으로 알려져 있다. 그러나 여타의 카메라를 입력 장치로 사용하는 방식들이 그러하듯이 배경과 조명 변화에 대해 취약하다는 것이 문제시된다. 본 논문에서는 특수한 장갑이나 표식을 사용하지 않고도, 배경 및 조명 변화에 강인하게 입력 영상에서 손영역을 검출하기 위해, 적응 손 컬러 모델과 함께 이전 위치 정보를 이용하였다. 손 영역 영상으로부터 수신호를 인식하기 위해서, 본 논문은 '손 자세'와 '손 궤적'을 기본요소로 하는 수신호 정의 방식을 바탕으로 한다. 확장성 있는 손 자세 분류를 위해서 소그룹 개념을 통한 2단계의 분류방식을 제안한다. 3차원 수신호 영상을 얻기 위해 사용된 두 대의 카메라로부터 얻은 영상들에 대한 상호보완적 선택 방법도 제시한다. 제안된 수신호 인식 방법은 차량 주행 시뮬레이터에 적용하여 실제 환경에서의 적용 가능성을 검증하였다.

• 지역사회간호학회지
• /
• 제14권1호
• /
• pp.45-54
• /
• 2003

Purpose: The purpose of this study is to identify sexual violence, sexual knowledge of elementary school high grade students and develop the sexual violence protect promotion program. Method: The subjects of the study were 365 elementary school high-grade students in Daegu, Gyeongbook. The instruments used in this study were sexual violence(8items) by Yom et al.(2001) and sexual knowledge (20items) by Ha(2000). The data were collected between November 26 and December 1, 2001 by using a self-administered questionnaire. Analysis of data was done by using descriptive statistics, Pearson correlation coefficient. t-test, A-NOVA and Duncan test with SPSS program. Result: 1) 78.4% of the subjects were educated for sexual knowledge. Source of knowledge for sex-related knowledge is the most teachers. 2) 50.9% of the subjects were educated for sexual violence. Source of knowledge for sexual violence is the most teachers. 3) 18.4% subjects experience sexual harassment. 8.8% of the subjects experienced serious sexual contact and 2.1% of the subjects were raped. 4) The average score of sex related knowledge was 8.93. The average score of misconception related sexual violence was 2.30. 5) Misconception of sexual violence was correlated with such demographic variables as grade(F=4.788, p=0.009), sex(t=2.971 p=0.003), region(t=3.614, p=0.000), father's education level(F=3.170, p=0.014), mother's education level(F=2.528, p=0.041), family income(F=5.577 p=0.004) 6) In the correlation between the scores of sex-related knowledge, misconception related sexual violence was a negative correlation. Conclusion: According to this study, it is needed to develop the program about sexual violence education for elementary school high-grade students.

• 한국의류산업학회지
• /
• 제11권1호
• /
• pp.66-74
• /
• 2009

The purpose of this study is to identify the factors mainly recognized by customers regarding environmental elements of clothing store. The respondents are classified into several groups according to their preferences on the environmental elements of clothing store. Also the relationship between the factors and the shopping characteristics of customers is reviewed based on the results. This survey was carried out through a questionnaire of male and female university students(Busan region) in their twenties. The data were analyzed by using Factor analysis, Cluster analysis, one-way ANOVA, Duncan test as a post identification and regression analysis. The results of this research can be summarized as follows; The perceived 7 factors about environmental elements of clothing store were service policy, store atmosphere, product variety, shopping convenience, trend of products, freedom of shopping and reception service. The respondents were classified into three groups(high recognizing group, middle recognizing group and low recognizing group) by the level of recognizing 7 factors. There were significant differences among 3 groups divided by the degree of recognizing the factors regarding environmental elements of clothing store and there was the meaningful relationship between these 7 factors and shopping characteristics. The high recognizing group has shopping characteristics like more shopping time, large expenditure for clothing and a lot of comparative stores. They are frequently in contact with clothing shopping environment and easily purchase clothes. Finally, the factors perceived by the environmental elements of clothing store significantly affected the shopping characteristics of the customers. So, store managers have to look for the perceived environmental elements of store by business and seek after the marketing factors which efficiently stimulate consumer.