• 한국콘텐츠학회논문지
• /
• 제20권2호
• /
• pp.360-370
• /
• 2020

필요 치과진료 미수진과 관련된 요인을 파악하고자 지역사회건강조사 원자료를 분석하였다. 21만 4861명의 만 25세이상 인구집단을 대상으로 인구학적 요인, 사회경제적 요인, 사회적지지 및 사회적 환경요인, 사회물리적 환경요인과 필요 치과진료 미수진과의 연관성을 확인하였다. 연구결과, 연령이 낮을수록, 소득분위가 높을수록, 교육수준이 낮을수록, 친척, 친구와 자주 접촉하지 않을수록, 친목, 여가 활동에 참여하지 못할수록, 사회물리적 환경(안전수준, 자연환경, 생활환경, 대중교통, 의료서비스)에 불만족할수록 필요 치과진료 미수진율이 높게 나타났다. 필요 치과진료 미수진에 인구학적 요인, 사회경제적 요인 뿐 아니라 사회적지지 및 사회적 환경요인, 사회물리적 환경요인이 통계적으로 유의한 영향이 있음이 확인되었다. 필요 치과진료 수진율을 높일 수 있는 방안으로 건강의 사회적 결정요인에 정책적 요인을 포함하는 추후 연구가 필요하겠다.

• Design & Manufacturing
• /
• 제10권1호
• /
• pp.41-45
• /
• 2016

Electrical equipment in factories, buildings, etc. with the development of the industry has become a large capacity. By the development, electric load also become diversified and there is also highly functional requirements being electrical equipment. Particularly in the small and medium-sized circuit breakers, tend to preferentially consider the economy stands out and improvements in safety, ease of mounting and connection through the modularity of the basic dimensions compact and cost to block expansion of the scope of the development of capacity, etc. The product having a competitive has been strongly required. In order to implement the circuit breakers of breaking capacity and compact at the same time taking into account the economic development of this technology applied to the current-limiting mechanism is essential budget or the current limiting mechanism is currently available mechanisms applicable to small and medium-sized frame (frame) can not do it. In this paper, at the same time satisfying the economic efficiency, by minimizing the load force of the moving contactor (moving contactor) to be applied to small and medium frame other hand to secure the economical efficiency without using high speed contact parting acceleration of the moving contactor conventional current-limiting mechanism, and to develop a current-limiting mechanism that can be satisfied with the same or higher performance to meet the needs of the market.

• 한국자동차공학회논문집
• /
• 제24권4호
• /
• pp.432-438
• /
• 2016

Whiplash injuries in low-speed rear-end collisions are the most common injuries and has been a social issue in insurance industry, such as excessive medical claim costs along with exaggerated injuries of victims and treatments from hospitals. According to the Korea Insurance Development Institute reports, the number of claims by rear-end collision was approximately 703,000, which accounts for 53.6 % of the total car-to-car collisions in 2014. Part of the neck injury claims in the Korea car insurance was approximately 28.3 %. Furthermore, approximately 98.4% of the injured persons in rear-end collisions sustained minor injuries under AIS2. In order to improve this situation as well as find out the severity of neck injuries from rear-end collision, the Korea Automobile Insurance Repair Research and Training Center conducted car-to-car rear-end crash tests that striking vehicles(SUV) collided into different sizes of struck-vehicles(small, middle, and large sedan) at the impact speeds of 8 km/h ~ 16 km/h. In order to analyze the whiplash injury, the BioRID-II was seated in each struck-vehicles, and the neck injury criteria(NIC), head contact time, maximum vehicle accelerations, and mean vehicle accelerations were calculated from values from the accelerations of the dummy and the struck-vehicles.

• 한국콘텐츠학회논문지
• /
• 제10권6호
• /
• pp.344-351
• /
• 2010

최근 병원은 의료에 대한 수요가 점차 증가하면서 신설과 확장을 통해 다양한 경쟁상황에 직면하고 있는 실정이다. 이러한 현실에서 병원서비스에 대한 품질 유지는 곧 병원의 생존과 발전을 위해, 병원 본래의 기능뿐만 아니라 경쟁력을 확보하기 위한 핵심 요인으로 평가되고 있다. 따라서 본 연구는 병원의 서비스 품질에 초점을 두고 서비스 내용을 중심으로 고객과의 접촉으로 나타나는 결과들을 종합 평가하였다. 본 연구에서 투입된 변수 즉, 병원서비스 품질과 고객만족, 재이용의도 등의 관계정도는 병원의 전략적 병원경영의 기초가 될 수 있기 때문이다. 본 연구결과 병원서비스 품질과 고객 만족, 재이용의도간의 영향 관계에서 병원서비스 품질은 고객 만족, 재이용의도에 매우 유의한 것으로 나타났다. 향후 이러한 결과는 고객중심적 병원경영에 지침을 제공할 수 있으며, 더 나아가 경쟁력 강화에 응용될 수 있을 것으로 기대된다.

• 정보저장시스템학회논문집
• /
• 제5권1호
• /
• pp.47-52
• /
• 2009

Most hard disk drives that apply the ramp load/unload technology unload the heads at the outer edge of the disk while the disk is rotating. The load/unload includes the benefits as like an increased areal density, a reduced power consumption and an improved shock resistance. A lot of papers investigating the effects of the various load/unload parameters such as a suspension tab, a limiter, a ramp and air-bearing surface designs have been published. However, in previous researches, an effect of the suspension is not considered at each load/unload step. In this paper, we focus that a variation of the state matrix affects the load/unload performance on based on a state matrix that is a stiffness matrix of the suspension. Because the state matrix is related to the suspension at each load/unload step, to change the state matrix means the structural change of the suspension. Therefore, we investigated a range of a pitch static attitude(PSA) and a roll static attitude(RSA) for load/unload performance. We also analyzed an effect of the variation of the state matrix a range of load/unload velocity occurred a slider-disk contact. We determined the variation of the state matrix to improve the load/unload performance through comparison of each factor of state matrix.

• 한국전문물리치료학회지
• /
• 제12권1호
• /
• pp.28-35
• /
• 2005

The purpose of this study was to determine whether gender differences existed in knee valgus kinematics in college students when performing a vertical drop landing. The hypothesis of this study was that females would demonstrate greater knee valgus motion. These differences in knee valgus motion may be indicative of decreased dynamic knee joint control in females. This study compared the initial knee valgus angle and maximum knee valgus angle at the instant of impact on vertical drop landings between healthy men and women. In this study, 60 participants (30 males, 30 females) dropped from a height of 43 cm. A digital camera and two-dimensional video motion analysis software were used to analyze the kinematic data. There was significant difference in the mean knee valgus angle at initial contact landing between the two groups (Mean=$7.88^{\circ}$, SD=$4.24^{\circ}$ in males, Mean=$12.93^{\circ}$, SD=$2.89^{\circ}$ in females). The range of knee valgus angle on landing (Mean=$3.25^{\circ}$, SD=$5.72^{\circ}$ in males, Mean=$11.44^{\circ}$, SD=$6.39^{\circ}$ in females) was differed significantly (p<.05). The maximal angle of knee valgus on landing (Mean=$10.91^{\circ}$, SD=$6.89^{\circ}$ in males, Mean=$24.25^{\circ}$, SD=$6.38^{\circ}$ in females) was also differed significantly (p<.05). The females landed with a larger range of knee valgus motion than the males and this might have increased the likelihood of a knee injury. The absence of dynamic knee joint stability may be responsible for increased rates of knee injury in females. No method for accurate and practical screening and identification of athletes at increased risk of ACL injury is currently available to target those individuals that would benefit from neuromuscular training before sports participation.

• 대한조선학회논문집
• /
• 제57권4호
• /
• pp.213-220
• /
• 2020

In the present paper, implosion responses of two adjacent cylindrical tubes under external hydrostatic pressure were experimentally investigated. The cylinder models were fabricated of aluminium alloy 6061-T6 commercial tubes. In the experiment, a pair of two-cylinders were placed inside of a support frame in a medium-size pressure chamber, whose design pressure was 6.0MPa. The distance between the two-cylinders was 30 millimeter measured from outer shell at the mid-length. The implosion tests were performed with water and compressed nitrogen gas as the pressurizing media. The ambient static pressure of the chamber and local dynamic pressure near the two-imploded models were measured simultaneously. It was found that the energy released during an implosion from the first, weaker cylinder triggered the instability of the second, stronger cylinders. In other words, the resulting shock wave of the first implosive impact from the weaker cylinder could cause the premature failure of the neighboring stronger cylinders. The non-contact implosion phenomena from the two-cylindrical tube were clearly observed.

• Composites Research
• /
• 제24권6호
• /
• pp.7-11
• /
• 2011

우레탄 수지 첨가에 의한 다이니마/비닐에스터 복합재료의 방탄효과 향상을 고찰하였다. 첫째로 우레탄 수지와 비닐에스터 수지를 스프레이 코팅하여 프리프레그를 제조하였으며, 수지함량을 21%로 조절하였다. 또한 혼합수지를 스프레이 코팅과 필름코팅으로 비교를 위한 프리프레그를 제조하였다. 그 다음 이들을 상온에서 1-2시간, 그리고 필요시 $100^{\circ}C$ 30분 정도 건조시켰다. 이들 프리프레그를 24층 적층한 다음 $120^{\circ}C$에서 5분 동안 정치 시킨 후 25분 동안 150 $kg/cm^2$ 압력하에서 경화 시켰다. 모의 파편탄(17 gr)을 이용하여 이들 복합재료의 방탄성능($V_{50}$)를 측정하였으며, UP127 및 EB8200으로 제조된 시편은 XSR10으로 제조된 시편에 비하여 각각 6.5 및 9.0 % 향상된 값을 보였다.

• 한국병원경영학회지
• /
• 제7권1호
• /
• pp.105-120
• /
• 2002

In the United States, the prospective payment system(PPS), under which diagnosis related groups (DRGs) are used to reimburse hospitals for the care of Medicare patients since 1983, Study results showed that the PPS is having a major impact on the quantity of services especially of hospital length of stay. The PPS has increased the likelihood that a patient will be discharged home in an unstable condition and the use of nursing homes or long term care facilities increased. Still, it is insufficient to conclude that the PPS has decreased the Medicare total expenditure, but relatively sufficient to conclude that the quality of care hasn't changed. The maintenance of the quality resulted from the systemic "check-and-balance" composed of three factors; (1) The doctors are reimbursed based on the fee-for-service system, (2) hospitals contact with doctors under the attending system, and (3) there are some public hospitals. In Korea, the reimbursement for hospitals and doctors are not divided, the hospitals have doctors as employees, and 90% of hospitals are private. These differences may weaken the "check-and-balance" existing in the U.S. system. And there are few long term care facilities and the diagnostic coding system using in pilot test are not suitable for Korean situation. In conclusion, for successful implementation of the DRG payment system in Korea, the government should establish the "check-and-balance" system in the health sector to make sure the quality of care before the implementation.

• 접착 및 계면
• /
• 제18권1호
• /
• pp.1-7
• /
• 2017

본 연구는 연필을 이용하여 연필 선 종이센서(pencil drawing paper sensor, PDPS)를 제작하였을 경우 센서로 활용하기 위한 기초연구를 실시하였다. PDPS를 제작하기 위한 기초 연구로 4B 조건이 최적이며, 연필 선의 길이는 20 mm 폭은 3 mm 조건이 적절하였다. 또한 종이는 A4조건이 최적이었으며, 접점의 안정화를 위해 스카치 테이프와 실버페이스트가 반드시 사용해야 데이터의 노이즈가 감소하였다. PDPS를 이용할 경우 온도에 대한 감지가 가능하였으며, 경험식으로 PDPS의 전기저항 변화도 결과와 온도 결과가 반비례 관계임을 확인하였다. 온도에 대한 PDPS 경험식을 바탕으로 복합재료의 성형단계에서의 확인한 PDPS의 전기저항 변화를 관찰하여 복합재료의 물성과의 상관관계를 확인하였다. 비교적 PDPS를 이용하여 복합재료의 기계적 및 계면 물성을 예측해 볼 수 있었다.