• 조명전기설비학회논문지
• /
• 제28권9호
• /
• pp.20-27
• /
• 2014

The power consumption pattern of high-speed railway has rarely during night time. But, during service time, the power is consumed irregularly related to train operation. Especially certain unusual about 1-2 days of service time interval to indicate the power consumption is rapidly growing phenomenon, which causes the capacity of the power contract is the annual electricity bill to rise rapidly as the cause. Normally, amount of peak power consumption bill rate at railway substation is over 20% of total electrical bill. Therefore, high-speed railway substation is expected to be considerably larger savings by reducing the peak power of the default charge(demand power).

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권8호
• /
• pp.2140-2156
• /
• 2023

The Wireless Sensor Network (WSN), is constructed out of teeny-tiny sensor nodes that are very low-cost, have a low impact on the environment in terms of the amount of power they consume, and are able to successfully transmit data to the base station. The primary challenges that are presented by WSN are those that are posed by the distance between nodes, the amount of energy that is consumed, and the delay in time. The sensor node's source of power supply is a battery, and this particular battery is not capable of being recharged. In this scenario, the amount of energy that is consumed rises in direct proportion to the distance that separates the nodes. Here, we present a Hybrid Firefly Glow-Worm Swarm Optimization (HF-GSO) guided routing strategy for preserving WSNs' low power footprint. An efficient fitness function based on firefly optimization is used to select the Cluster Head (CH) in this procedure. It aids in minimising power consumption and the occurrence of dead sensor nodes. After a cluster head (CH) has been chosen, the Glow-Worm Swarm Optimization (GSO) algorithm is used to figure out the best path for sending data to the sink node. Power consumption, throughput, packet delivery ratio, and network lifetime are just some of the metrics measured and compared between the proposed method and methods that are conceptually similar to those already in use. Simulation results showed that the proposed method significantly reduced energy consumption compared to the state-of-the-art methods, while simultaneously increasing the number of functioning sensor nodes by 2.4%. Proposed method produces superior outcomes compared to alternative optimization-based methods.

• 기술사
• /
• 제39권5호
• /
• pp.20-24
• /
• 2006

The energy of 97% consumed by our country depends on it's import from foreign market. This article covers hydrogen, fuel-cell, coal liquefaction gasification energy, and solar, wind, photovoltaic, hydro power, ocean, waste, geothermal, bio energy that is renewable energy, and so on, which are new-generation energy sources, increasing the concern on new & renewable source of enenrgy in future.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.495-498
• /
• 1998

Mobile computers have restrictions for size, weight, and power consumption that are different from traditional workstations. Storage device must be smaller, lighter. Low power consumed storage devices are needed. At the present time, flash memory device is a reasonable candidate for such device. But flash memory has drawbacks such as bulk erase operation and slow program time. This causes of worse average write performances. This paper suggests a storage method which improves write performance.

• 열병합발전
• /
• 통권27호
• /
• pp.5-9
• /
• 2002

High pressure steam pipe in power plants is subjected to service conditions under which creep processes take place limiting the component's lifetime. To ensure a safe and economic operation it is necessary to get accurate information about the lifetime situation of single components as well as of the whole system. Careful evaluation is combined with FEM analysis, NDT, microstructure evaluation. Especially, 14MoV63 steel is used as material for main steam pipe for 30 years old power plants. In service inspections have shown an increasing number of cracks and creep cavities beside stress concentration parts. A detailed analysis came to the conclusion that lifetime has been consumed to a high degree, 80%level.

• 제어로봇시스템학회논문지
• /
• 제10권2호
• /
• pp.164-170
• /
• 2004

Recently, the demand for micro hard disk drive that provides high-capacity removable storage for handhold electronic devices is growing very rapidly Reducing power consumption is one of the primary control objectives in micro disk drives. The input power delivered to the seek servo system is consumed as heat by the transistors of power amplifier and motor coil resistance. In this paper, we present a new seek servo controller for minimizing the power consumption. We use a Fourier decomposition and nonlinear programming to determine the optimum seek profile that minimizes the power consumption. Also, the trajectory tracking controller is developed for exact tracking of the optimum seek profile. Finally, we present some experimental results using a commercially available micro disk drive in order to demonstrate the superior performance of the proposed controller.

• 전력전자학회논문지
• /
• 제6권2호
• /
• pp.217-221
• /
• 2001

본 논문에서는 통신기기와 같은 저용량 부하를 위한 APLC를 설계하였다. APLC는 부하와 병렬로 위치하여 부하에 필요한 무효전력 성분만을 공급함으로 운전 효율을 향상시켰으며 히스테리스 제어기를 마이크로 프로세서와 아날로그 회로를 이용하여 구현하여 저가형 제어기를 구현하였다. 컴퓨터 시뮬레이션을 통해서 보상 시스템의 특성을 해석하였으며 또한 실험에 의해 제안된 APLC제어기가 고조파 저감 및 역률 개선을 수행하고 있음을 확인하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제11권4호
• /
• pp.318-328
• /
• 2011

Stage-level reconfigurable chip multiprocessor (CMP) aims to achieve highly reliable and fault tolerant computing by using interwoven pipeline stages and on-chip interconnect for communicating with each other. The existing crossbar-switch based stage-level reconfigurable CMPs offer high reliability at the cost of significant area/power overheads. These overheads make realizing large CMPs prohibitive due to the area and power consumed by heavy interconnection networks. On other hand, area/power-efficient architectures offer less reliability and inefficient stage-level resource utilization. In this paper, I propose a hierarchical multiplexing interconnection structure in lieu of crossbar interconnect to design area/power-efficient stage-level reconfigurable CMP. The proposed approach is able to keep the reliability offered by the crossbar-switch while reducing the area and power overheads. Experimental results show that the proposed approach reduces area by up to 21% and power by up to 32% when compared with the crossbar-switch based interconnection network.

• 대한지역사회영양학회지
• /
• 제5권2호
• /
• pp.297-306
• /
• 2000

In order to examine the relationship between the number of different foods consumed and nutrient intake, one-day food consumption were surveyed by 24-hour recall from a sample of 287 individuals(20-49 years) living in Daejon City. The number of consumed food items did not include seasonings except red pepper power, sugar, oil, and soybean paste when used in large amounts(DVS). The number, including all seasonings except salt and vinegar(DVSS), was also counted. Of the total subjects, 43.6%(DVS) or 39.0%(DVSS) consumed 18-23 daily different foods with an average of 20.2 or 22.9, respectively. As the DVS increased, daily intakes of total foods and most food groups were elevated. Cereals however were not changed and eggs were decreased with increasing DVS. Energy and nutrient intakes and their mean adequacy ratio(MAR) and index of nutritional quality(INQ) also show positive correlations with DVS. MAR equal to or greater than($\geq$) 0.75 was taken as a cut-off point for nutritional adequacy. In that case, the mean INQ was shown to be $\geq$1. MRI(10) for energy and 9 nutrients and MAR(3) for Ca, vitamin A, and riboflavin were estimated. Form a regression analysis, when MAR(10) was 0.75, the DVS and DVSS were assumed to be 19.6 and 22.2, respectively. And when MAR(3) was 0.75, the DVS and DVSS were assumed to be 31.6 and 34.6, respectively. However the subjects whose MAR(3) was 0.75(0.7-0.8) 23.8(DVS) or 26.6(DVSS) different foods in average, and their mean intakes of energy and all nutrients, except vitamin A, were ranged at 85-100% of the RDA. Of the 74 subjects who consumed DVS$\geq$24, 24 to 42 numbers took 〈75% RDA of Fe, Ca, riboflavin, and vitamin A. And five of 7 who consumed DVS$\geq$32 took $\geq$125%RDA of protein, which showed concerns of overnutrition in case of DVS$\geq$32. Form the above results it could be suggested that a daily intake of 24-32(or 28) of DVS or 27-35(or 31) of DVSS was recommendable for an optimal nutritional of all nutrients if the variety of food groups and sufficient intake of vitamin A and calcium were emphasized together.

• Journal of Multimedia Information System
• /
• 제3권3호
• /
• pp.63-68
• /
• 2016

Environmental downtime produces a significant cost to organizations and makes them unable to do business because what happens in the data center affects everyone. In addition, the amount of electrical energy consumed by data centers increases with the amount of computing power installed. Installation of physical Information Technology and facilities related to environmental concerns, such as monitoring temperature, humidity, power, flood, smoke, air flow, and room entry, is the most proactive way to reduce the unnecessary costs of expensive hardware replacement or unplanned downtime and decrease energy consumed by servers. In this paper, we present remote system for monitoring datacenter implementing using open-source hardware platforms; Arduino, Raspberry Pi, and the Gobetwino. The sensed data displayed through Arduino are transferred using Gobetwino to the nearest host server such as temperature, humidity and distance every time an object hitting another object or a person coming in entrance. The raspberry Pi records the sensed data at the remote location. The objective of collecting temperature and humidity data allows monitoring of the server's health and getting alerts if things start to go wrong. When the temperature hits $50^{\circ}C$, the supervisor at remote headquarters would get a SMS, and then they would take appropriate actions to reduce electrical costs and preserve functionality of servers in data centers.