• 한국정보통신학회논문지
• /
• 제15권11호
• /
• pp.2347-2352
• /
• 2011

차량 운전자는 안전을 위해 항상 자신의 차량의 상태를 점검하고 파악하는 것이 필수이다. 하지만 운전자가 차량의 상태를 알고자 한다면 전문 업체에게 의뢰하기 때문에 운전자는 시간과 금전적인 비용이 지불되어야 한다. IT 기술의 발달로 인해 스마트폰의 다양한 기능을 이용하여 차량의 상태 점검을 할 수 있게 되었지만, 기존 스마트폰 자동차 진단 시스템은 자동차의 전문적인 지식을 학습해야 차량 상태를 알 수 있기 때문에 사용자들에게 진단기의 필요성이 부각되지 않는다. 본 논문에서는 OBD-II 프로토콜 변환 WiFi 커넥터를 통해 받아오는 OBD-II 정보를 차량 운전자에게 필요한 차량 소모품 교체 주기의 점검, 차량 문제점 진단 정보를 사용자에게 실시간으로 보여주며 손쉽게 사용할 수 있는 자동차 소모품 구현을 iPhone에서 구현 하였다.

• 한국인터넷방송통신학회논문지
• /
• 제12권2호
• /
• pp.29-34
• /
• 2012

현재 ETCS 단말기가 대중화 되어가는 과정에서 문제점은, 톨게이트를 통과할 때 수행하는 과금 서비스 외에 별다른 서비스를 제공하지 않는다는 데 있다. 본 논문에서는 ETCS 단말기가 교통정보 수집/제공은 물론 OLED에 순간연비, 평균연비, 구간연비 소모량 측정 및 사용 금액을 표시함으로써 운전습관을 교정하도록 유도하여 연료를 절감할 수 있도록 하는 에코드라이빙 기능과 엔진오일, 냉각수, 팬벨트 등 차량의 소모품 교환시점 알림 기능과 ECU를 통해 엔진과열, 제너레이터 충전유무, 냉각수 과열 등 차량운행상태를 실시간으로 진단하여 운행 중 위험을 예방하는 정보를 제공하는 기능을 연구한다. 에코드라이빙과 차량소모품 알림기능 그리고 차량진단 서비스를 제공하기 위하여 제안하는 시스템은 차량의 상태정보를 수집하기 위한 OBD-II 기반 차량진단 모듈과 ETCS 단말기, 차량 진단 정보 변환 소프트웨어로 구성된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.487-487
• /
• 2009

One of the critical consumables in chemical mechanical polishing (CMP) is a specialized solution or slurry, which typically contains both abrasives and chemicals acting together to planarize films. In single abrasive slurry (SAS), the solid phase consists of only one type of abrasive particle. On the other hand, mixed abrasive slurry (MAS) consists of a mixture of at least two types of abrasive particles. In this paper, we have studied the CMP characteristics of mixed abrasive slurry (MAS) retreated by adding of $CeO_2$ abrasives within 1:10 diluted silica slurry (DSS). The slurry designed for optimal performance should produce reasonable removal rates, acceptable polishing selectivity with respect to the underlying layer, low surface defects after polishing, and good slurry stability. The modified abrasives in MAS are evaluated with respect to their particle size distribution, surface morphology, and CMP performances such as removal rate and non-uniformity. As an experimental result, we obtained the comparable slurry characteristics compared with original silica slurry in the viewpoint of high removal rate and low non-uniformity.

• Tribology and Lubricants
• /
• 제32권2호
• /
• pp.61-66
• /
• 2016

Total thickness variation (TTV), BOW, and surface roughness are essential characteristics for high quality sapphire substrates. Many researchers have attempted to increase removal rate by controlling the key process parameters like pressure and velocity owing to the high cost of consumables in sapphire chemical mechanical polishing (CMP). In case of the pressure approach, increased pressure owing to higher deviation of pressure over the wafer leads to significant degradation of the TTV. In this study, the authors focused on reducing TTV under the high-pressure conditions. When the production equipment polishes multiple wafers attached on a carrier, higher loads seem to be concentrated around the leading edge of the head; this occurs because of frictional force generated by the combination of table rotation and the height of the gimbal of the polishing head. We believe the skewed pressure distribution during polishing to be the main reason of within-wafer non-uniformity (WIWNU). The insertion of a hub ring between the polishing head and substrate carrier helped reduce the pressure deviation. Adjusting the location of the hub ring enables tuning of the pressure distribution. The results indicated that the position of the hub ring strongly affected the removal profile, which confirmed that the position of the hub ring changes the pressure distribution. Furthermore, we analyzed the deformation of the head via finite element method (FEM) to verify the pressure non-uniformity over the contact area Based on experiment and FEM results, we determined the optimal position of hub ring for achieving uniform polishing of the substrate.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권11호
• /
• pp.4951-4957
• /
• 2016

Background: Apart from reducing occupational exposure to cytotoxic hazards, the PhaSeal(R) closed-system transfer device (CSTD) can extend the beyond-use dates (BUDs) of unfinished vials of antineoplastic drugs for up to 168 hours (seven days). In this study, the total material cost incurred by its use in a Malaysian government-funded hospital was calculated. Methods: A list of vial stability following initial needle punctures of 29 commonly-used antineoplastic drugs was compiled. The amount of the materials used, including drugs, infusion bottles, the PhaSeal(R) CSTD and other consumables, was recorded on a daily basis for three months in 2015. The total cost was calculated based on the actual acquisition costs, and was compared with that of a hypothetical scenario, whereby conventional syringe-needle sets were used for the same amounts of preparations. Results: The use of the PhaSeal(R) CSTD incurred a cost of MYR 383,634.52 (USD 92,072.28) in three months, representing an average of MYR 170.5 (USD 40.92) per preparation or an estimated annual cost of MYR 1,534,538.08 (USD 368,289.14). Compared with conventional syringe-needle approach, it is estimated to lead to an additional spending of MYR 148,627.68 (USD 35,670.64) yearly. Conclusion: Although there was a reduction of drug wastage achieved by extending BUDs of unfinished vials using the PhaSeal(R) CSTD, cost saving was not observed, likely attributable to the wide use of lower-priced generic drugs in Malaysia. Future studies should further evaluate the possibility of cost saving, especially in health settings where branded and high-cost antineoplastic drugs are more commonly used.

• Journal of Preventive Medicine and Public Health
• /
• 제18권1호
• /
• pp.41-50
• /
• 1985

To find out the differences in medical practice according to the environment of patient care and managerial situation of the medical care institutions, normal spontaneous vaginal delivery and acute appendicitis were selected, which is suitable for comparison because of their high comparability. A total of 473 cases of normal spontaneous vaginal delivery and 408 cases of acute appendicitis was sampled from the claims to Korea Medical Insurance Cooperations during January to June 1984. Complicated cases were excluded from population and sampling was restricted from 40 to 60 percentile for total charges by the type of medical care facility in order to rule out the influence originating from case mix. Important items representing type and quantity of medical care service were compared by type of facility. Major findings are as follows : 1. University hospital shows the highest in charges per case and decrease in order of general hospital, and clinic. 2. In case of normal spontaneous vaginal delivery, average length of stay shows statistically significant difference by type of facility. 3. Charge amount for each service item affected by practice pattern shows statistically significant difference mostly by type of facility. It is suggested that medical practice pattern is different by type of facility for medical services. 4. Difference in total medical expenditure by type of facility is affected more with charges for materials, consumables and drugs than with fee for service activity. 5. In administering drugs to patients, hospital and clinic show higher injection rate than university and general hospital. 6. Clinical Laboratory tests were common in order of uninalysis, hemoglobin, hematocrit, white blood cell count, urine microscopic examination in cases of normal spontaneous vaginal delivery; white blood cell count, urinalysis, hemoglobin, hematocrit, urine microscopic examination, white blood cell differential count, in cases of acute appendicitis. 7. The result for Laboratory test and Radiologic study shows extreme difference by type of facility. Test rate is lowest in clinic and increase hospital, general hospital, and university hospital in order, both in type and frequency.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2010년도 춘계학술발표대회 초록집
• /
• pp.69-69
• /
• 2010

최근 컨테이너 선박의 초대형화로 극후물 고장력 강재인 항복응력 460MPa급 고장력강인 EH47이 개발되었다. 두께 80mm의 극후물 용접에서 용접생산성 향상을 위하여 EGW/FCAW로 양면 용접이 검토되고, 입열량은 최대 300kJ/cm의 대입열 용접이 요구된다. 이를 위해서는 강재 및 용접재료 모두 300kJ/cm 용접부 성능이 선급 규격을 만족하여야 함은 물론 마지막 조립단계에서 적용되기 때문에 용접재료의 용접작업성도 매우 크게 요구되고 있다. 먼저 대입열 용접금속에서 요구되는 저온 충격인성($vE_{-20^{\circ}C}{\geq}57J$)을 만족하기 위하여는 용접금속의 미세조직 제어가 필요하며, 특히 조대한 입계페라이트 생성을 억제하고 미세한 입내 페라이트를 균일 분포하는 것이 중요하지만, 이를 위해 용접금속의 소입성이 지나치게 높이면 경화조직인 베이나이트 분율이 증가하여 오히려 용접금속 저온 충격인성을 저하시키므로, 적절한 용접금속의 성분 제어가 중요하다. 한편 용접부는 선급에서 요구하는 최소 강도인 570MPa를 만족하기 위하여 용접금속의 소성구속 현상을 활용하여 용접부 인장강도를 확보 할 수 있음을 확인했다. 이를 위해서는 용접금속의 적정한 경화도 확보가 필요하였다. 전술한 바와 같이 대입열 용접금속 저온 충격인성 확보와 용접부 강도 측면을 고려하여 용접금속 최적의 탄소당량 범위를 제시코자 하였다. 한편 용접재료의 용접작업성은 EGW용접의 용적이행 현상은 자유비행이행으로 이루어지고 있으며 특성상 용접중 용적과 용융지 사이에 많은 순간단락 현상을 동반하고 있으며, 슬래그 유동이 불안정하면 아크 꺼짐 현상도 관찰되고 있다. 따라서, 현장용접시 원할한 용접작업성을 확보할 수 있는 평가 기준으로써 아크 전류 및 전압의 변동 정도를 설정하고, 용접재료의 용접작업성 확보 기준을 제시코자 하였다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권15호
• /
• pp.6257-6261
• /
• 2014

Background: HPV related cervical cancer as one of the most common women cancers in developing countries. Regarding accessibility of commercial vaccines, any long or short term modality for integrating preventive immunization against HPV in a national program needs comprehensive information about HPV prevalence and its genotypes. The important role of selecting most accurate diagnostic technologies for obtaining relevant data is underlined by different assays proposed in the literature. The main objective of the present study was to introduce an in-house HPV typing assay using multiplex real time PCR with reliable results and affordable cost for molecular epidemiology surveys and diagnosis. MATERIALS AND METHODS: 112 samples of formalin fixed paraffin embedded tissues and liquid based cytology specimens from patients with known different grades of cervical dysplasia and invasive cancer, were examined by this method and the result were verified by WHO HPV LabNet proficiency program in 2013. RESULTS: HPV was detected in 105 (93.7%) out of 112 samples. The dominant types were HPV 18 (61.6%) and HPV 16 (42.9%). Among the mixed genotypes, HPV 16 and 18 in combination were seen in 12.4% of specimens. CONCLUSIONS: According to acceptable performance, easy access to primers, probes and other consumables, affordable cost per test, this method can be used as a diagnostic assay in molecular laboratories and for further planning of cervical carcinoma prevention programs.

• 한국작물학회지
• /
• 제59권3호
• /
• pp.359-363
• /
• 2014

Soybean seed is a good source of plant protein in human consumables such as baby formula and protein concentrate. The seeds contain an abundance of storage proteins, namely ${\beta}$-conglycin and glycinin that account for ~ 70-80% of the total seed protein content. Proteome profiling has been proved to be an efficient way that can help us to investigate the seed storage proteins. In the present study, the seeds were removed from the pods and the cotylendonary tissues were separated from the testa for proteome analysis in order to investigate the seed storage proteins. A systematic proteome profiling was conducted through one-dimensional gel electrophoresis followed by MALDI-TOF-TOF mass spectrometry in the seeds (cotyledonary tissue) of soybean genotypes. Two dimensional gels stained with CBB, a total of 10 proteins were identified and analyzed using MASCOT search engine according to the similarity of sequences with previously characterized proteins along with the UniProt database. A total of ten proteins such as glycinin Gy4 precursor, glycinin G3 precursor, glycinin G1 precursor, glycinin chain A2B1a precursor, glycinin chain A2B1a precursor were identified in our investigation. However, the glycinin subunit may be considered to play important roles in soybean breeding and biochemical characterization. In addition, the improved technique will be useful to dissect the genetic control of glycinin expression in soybean.

• 한국의류학회지
• /
• 제39권2호
• /
• pp.190-203
• /
• 2015

The fashion industry has been rearranged by Global SPA brands (like ZARA and H&M), which are powerful retailers that integrate the value chain ranging from manufacturing to sales. SPA brands can offer good quality of clothing at a reasonable price by cutting the margin between the supply chain. They are also called fast fashions since they make expedited efforts to respond to market trends and consumers. Despite the slow growth of the fashion industry in Korea, as global SPA brands rapidly expand market share, traditional fashion companies have launched several SPA brands such as MIXXO and SPAO (E-LAND), 8SECONDS (CHEIL INDUSTRIES). The few academic studies on this subject are focused on the analysis of secondary data such as news and books. The current research is qualitative and empirical attempts to explore the success factor of SPA brands with analysis of 1:1 in-depth interviews with experts who have worked for global SPAs such as Uniqlo, H&M, and ZARA, based on the grounded theory. The main phenomenon was shown to be that global SPA brands were popular since they offer a variety of products with a large assortment at reasonable and cheap prices in a large scale and multifunctional retail store. Most of them displayed main phenomena that can be realized due to the purchasing cycle of clothing that is shorter with consumers' regarding clothing as consumables. Global SPA brands had three types of marketing strategy: sellable product, sales strategy according to consumer response, and multifunctional stores. Each global SPA brand developed marketing strategies based on core competency and national conditions. The three success factors shorten the consumer decision making process of clothing. This study concludes with implications for practitioners of SPA brands born in Korea.