• Journal of Korean Society on Water Environment
• /
• v.22 no.2
• /
• pp.333-341
• /
• 2006

The concept for the decolorization in biological dye wastewater treatment systems is based on anaerobic treatment, for the reductive cleavage of the dyes' azo linkages, in combination with aerobic treatment, for the degradation of the products from azo dye cleavage, aromatic amines. Batch tests were conducted to examine the conditions and the factors affecting biological treatment of dye wastewater. From the tests, the removal efficiencies of organics and colors of dyeing wastewater were improved to $COD_{Cr}$ 27% and color 9% by injecting 10% of the domestic wastewater as a cosubstrate, and $COD_{Cr}$ 30%, color 22% with 30% injection of domestic wastewater. Therefore it was proved that decolorization efficiency is demonstrated with domestic wastewater as a cosubstrate. The analysis of aromatic amines in wastewater showed that decolorization was achieved by cometabolism while aromatic amines were produced by cleavage of azo bonds under anaerobic conditions and these products were removed in an aerobic tank subsequently.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.45 no.4
• /
• pp.89-97
• /
• 2003

Using inference models developed for estimation of the parameters necessary to implement the Runoff Block of the Stormwater Management Model (SWMM), a number of alternative inference scenarios were developed to assess the influence of inference model complexity and structure on the calibration of the catchment modelling system. These inference models varied from the assumption of a spatially invariant value (catchment average) to spatially variable with each subcatchment having its own unique values. Fur-thermore, the influence of different measures of deviation between the recorded information and simulation predictions were considered. The results of these investigations indicate that the model performance is more influenced by model structure than complexity, and control parameter values are very much dependent on objective function selected as this factor was the most influential for both the initial estimates and the final results.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.105-108
• /
• 2008

본 연구에서는 기존에 수행된 균일단면을 가지는 I형 보의 좌굴 강도에 대한 해석적?이론적 연구를 토대로 일축대칭을 이루는 변단면 I형보의 좌굴강도를 산정하고자 범용구조해석프로그램 ABAQUS (2007)를 이용하여 유한요소해석을 실시하였다. 유한요소해석에는 4절점 쉘요소인 S4R이 사용되었고, 플랜지 길이방향 비, 너비방향 비, 두께의 비로 일축대칭 스텝보를 사용하였으며, 균일모멘트를 작용시켰다. 개발된 좌굴강도 제안식은 해석결과와 비교하여 -11%~2%의 오차범위를 나타내었다. 본 연구결과는 다양한 형식의 일축대칭 I형보가 사용되는 빌딩 및 교량 구조물의 경제적이고 합리적인 설계에 활용 될 수 있을 것이다.

• Journal of Korean Society for Quality Management
• /
• v.40 no.2
• /
• pp.156-165
• /
• 2012

The objective of this study is to identify the critical dimensions of comprehensive quality and to prioritize them for improvement of the quality competitive advantage. The critical dimensions, sub-dimensions and measurement items of comprehensive quality were abstracted from literature of quality, and constructed a model of hierarchical structure. 115 experts in four groups(supplier, buyer, consultant, and professor) were participated in pair-wise comparison of quality dimensions, but some of these responses were removed because the overall consistency of evaluator judgements exceed the acceptable ratio of 0.10. The priorities of quality dimensions for industrial and consumption goods were calculated respectively using the analytic hierarchy process(AHP) approach. As a result, product quality had the highest weight of 0.65, followed by support quality(0.18) and service quality(0.17) for industrial goods while product quality also had the highest weight of 0.62, but service quality(0.22) was preferred over support quality(0.16) for consumption goods.

• Korean Journal of Hydrosciences
• /
• v.2
• /
• pp.61-68
• /
• 1991

This study assessed the contribution of heavy metals to total toxicity as well as the presence other toxic compounds before and after adding the chemical P to concurrently conducted bioassay tests of Daphnia magna and P. Phosphoreum. The following conclusions were drawn from this study : With excessive EDTA dosage, a toxicity reduction in Microtox would occur due to a metal-comples being formed. Microtox was far less sensitive than D. magna to heavy metal toxicity, but extended exposure time and reagent could increase the sensitivity.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2006.10a
• /
• pp.241-255
• /
• 2006

Owing to a landslide or embankment damage be caused by a localized torrential downpour and heavy snowfall resulted from recent abnormal climate, a slope stability is very important. This study is investigate a general slope reinforcement method and applicability improvement of soil nailing method utilized prototype loading test for the facing stiffness effect confirmation. A prototype loading test supplements general slope stability study by numerical analysis or laboratory test with a resonable analysis of slope structure.

• Journal of Information Technology Applications and Management
• /
• v.9 no.1
• /
• pp.1-26
• /
• 2002

ERP is the key-enabler of enterprise's informatization. Seletion of a right ERP system is one of the critical issues. Previous study shows that since a very few methodologies of selecting ERP systems are provided, most of companies have difficulty in Implementing ERP system. The purpose of this study is to analyze the characteristics of ERP system selection factors and develop the ERP evaluation methodology An empirical study is performed and shows that there are signigicant differences in ERP selection factors among ERP consultant, ERP developer, and system manager. The result shows that five factors such as general characteristics of software and supplier, technology characteristics of software and supplier, and Project management shills are significant. Based on the five factors, the evaluation methodology is developed. The methodology will help enterprises to make better decision in selecting ERP systems.

• Steel and Composite Structures
• /
• v.19 no.6
• /
• pp.1483-1499
• /
• 2015

With the improvement of the quality of construction materials and the development of construction technologies, large-scale long-span steel frame buildings have been built recently. The P.E.B system using tapered members is being employed as an economically-efficient long-span structure owing to its advantage of being able to distribute stress appropriately depending on the size of sectional areas of members. However, in December 2005 and in February 2014, P.E.B buildings collapsed due to sudden loads such as snow loads and wind gusts. In this study, the design and construction of the P.E.B system in Korea were analyzed and its structural safety was evaluated using the finite element analysis program to suggest how to improve the P.E.B system in order to promote the efficient and rational application of the system.

• Solar Energy
• /
• v.12 no.3
• /
• pp.21-27
• /
• 1992

This study is presents model testing to evalute daylighting performance in Atrium Building. There are several methods fof the prediction of Daylighting level in a Atrium Building, But they are not sufficient to estimate intreior daylight level of each different hights onleaner Atrium Building. In this study provide with making the model to estimate the environmental effect for the daylight on leaner Atrium, measuring the model in 80 variable sky condition, building direction, interior length-width ratio through the variation of floor-hight and space ratio.

• Journal of the Korean housing association
• /
• v.9 no.2
• /
• pp.51-56
• /
• 1998

With the improved quality of life standards interior design is recently gaining more concerns than ever before. This requires more well organized and standardized business and marketing in the field. Consequently, a few interior design firms concern about computerizing their marketing process to do this. This paper focuses on developing a computerized consulting system assisting interior design. For this a standardized consulting process is developed. The process includes the input of customer's information, surveying customer's preferences on interior design styles, estimation and budget adjustment, suggesting packages and interior items, and printing consulting results. The system developed is valuable in three different viewpoints: First, from the customer's view it can be a decision-making tool. Second, from the consultant's point of view it is a front-end marking tool. Third, it is an information collector from the viewpoint of an interior design firm.