• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.339-340
• /
• 2023

Steel construction is one of the commonly used methods in building construction due to its efficiency in terms of time and cost. In particular, the top-down method using steel frames is widely used in the construction of underground structures in urban areas to shorten the construction period. However, there is currently no standardized cost estimation for subway steel frame construction in Korea, causing difficulties in determining the expected cost. In this study, we aim to provide basic data for establishing a cost estimation standard for subway steel frame construction through on-site surveys of subway steel frame construction commonly used in urban areas.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.12-16
• /
• 2011

Building Information Modeling (BIM) is being widely spread in AEC industry worldwide and also in South Korea. Although the creation of digital model is better to be started at design stage, it can also improve the productivity of construction by simulating the actual construction process and environment. This paper presents application of BIM-based simulations related with design changes to transfer floors in 58-storey reinforced concrete office building. Transfer floor is not only a structurally important part of the building but also a challenging part of the actual construction in terms of sequence and period due to the complexity of the work. Preconstruction of rebar, mechanical, and plumbing is performed to review the construction drawings and to perform clash detection. Each item of application is evaluated for its effectiveness on actual construction and for the development potential.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.4
• /
• pp.385-391
• /
• 2017

The warranty liability period for defects in apartment buildings by work type is not based on scientific analysis, making the appropriateness of the term a culprit behind the lawsuits. Therefore, this research aims to evaluate the appropriateness of the warranty liability term of apartment buildings by identifying the current status of defects, in particular, caused by finishing works. That is because the number of defects, caused during the finishing works, accounted for the largest portion of the total defect cases of apartment buildings reported to the Apartment Defect Dispute Mediation Committee under the Ministry of Land, Infrastructure, and Transport of Korea between 2010 and 2011. The result from analyzing claims for defect repairs of the finishing works showed that most cases by work type continued to be made after two years, and only about 60% were charged within the warranty period. And, defects by work type have correlation, which needs to be considered for a better construction technique. Considering a low correlation between the possibility of defects and the construction performance rankings, which are highly relevant to the apartment preference. It is believed that there needs to be a qualification process for agencies that actually performs finishing works.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.1
• /
• pp.45-50
• /
• 2019

This research analyzed that what factors affect to the change of social positioning of 'multi-cultural family(MCF)' centered on 'multi-cultural family in Jecheon City using Social Construction. The purpose of this research analyze the social positioning of MCF in Jecheon City, policy design depending on that social positioning and the effect of social perception. Therefore, this research carried out qualitative analysis method that analyzed news articles, legislations and interviews from 1990 to 2013 based on social construction theory. For the purpose, first, the time scope could be divided into four periods such as 'the quickening period in 1990s', 'quantitative growth period from 2000 to 2005', 'qualitative growth period from 2006 to 2011', 'the period of antagonism after 2012' of MCF.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.346-351
• /
• 2007

As the construction technology is rapidly advancing internationally, the necessity of virtual construction technology development is drastically demanded in the construction industry together with a fusion technology with information technology(IT). The construction technology will be changed as the paradigm of construction technology in the future. The establishment of building structural system in the virtual construction basis is necessary for the integration of construction process, and it will be expected to produce the effect of reduction of construction period and quality improvement through the environment of integration. This study is to present the analysis of the existing process of structural design, the content of research & development as per the building structural system on virtual construction basis and the direction of research.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.208-209
• /
• 2022

This study aims to analyze the risk factors caused by object damage and third-party damage loss in actual bridge construction based on past insurance premium payment data from major domestic insurers for bridge construction projects, and develop a quantitative loss prediction model. For the development of quantitative bridge construction loss model, the dependent variable was selected as the loss ratio, and the independent variable adopted 1) Technical factors: superstructure type, foundation type, construction method, and bridge length 2) Natural hazards: flood anf Typhoon, 3) Project information: total construction duration, total cost and ranking. Among the selected independent variables, superstructure type, construction method, and project period were shown to affect the ratio of bridge construction losses, while superstructure, foundation, flood and ranking were shown to affect the ratio of the third-party losses.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2002.11a
• /
• pp.17-22
• /
• 2002

This Waterproofing Material which mainly consisted of 2 components of waste tire chip powder and waste glass powder. This Study is abut development of waterproofing Material, There is not tried in domestic. The most Motive of this Study wishes to recycle resources and get the economic performance for waterproofing Material The result of this Study is as followings. (1) Dense waterproofing floor is formed between waste tire chip by Coupling Agent(the most effective method to encourage adhesive strength and raise cohesion of material by combination.) (2) Expected to bring effect to shorten construction period at spot application potentially space-time in moisture aspect. Also, shortening effect of construction period and spot work are considered to be gone efficiently selecting pre-mix construction method. (3) This development Waterproofing material has elasticity that nature side compatibility of cement ingredient and plastic Emulsion have when utilize and constructs waite resources (being waste tire chip and waste glass powdered).

• Journal of architectural history
• /
• v.22 no.5
• /
• pp.37-46
• /
• 2013

This paper aims to examine the constructional background and process of the Japanese military installations of Jisim-do, especially based on the military secret documents. Furthermore, it aims to analyze the characteristics of the remains. First, the study looked into the procedure of forcible occupation by Japan, involving the background of the designation and forcible accommodation of military reservations, and forced eviction by the purchase of land. Second, the study identified the background of construction, purpose, and construction period of each battery built throughout the 'Fort maintenance period' according to changes in international situations. Third, it is the 'Chukseongbu' that supervised the construction of fortresses. Fourth, the study considered a series of arrangement processes in which Jisim-do became a fortresses through "Yukgunsungdae-ilgi", a military operations report for the Japanese army. Through this, it discovered a clear construction process, construction details, and the supply for Jisim-do. The study was also able to reveal the meticulousness in constructing firm facilities more promptly from the 'design tactics'.

• Journal of the Korean Society of Costume
• /
• v.27
• /
• pp.27-40
• /
• 1996

1.It was recorded at "Dong Gook Tong Gam" of King "Jang Soo" that "Sim-Eui" in Korea was first introduced from China at the reign of King, "Moon Ja"(491,A.D), Go Goo Ryo. 2."Sim-Eui" was worn as a mourning dress during the period of "Go Ryo" and as a concanical robe of Confucian, a ceremonial dress at home and for the rules of etiquettes during Cho Sun Dunasty. 3.Several theories about the construction and the using services of "Sim-Eui" are obseved and summerized. 4.Mr. Kyu-soo Park gives a definition to "Sim-Eui" as a Fortune of Heaven & Earth, the Constellation of the Cosmic Dual Forces, the Revolution of the Four Seasons, a dignified mien & the Way of a Man of Virtue and Virtue of the golden Mean. 5.I observed the concrete measurements of the each parts of "Sim-Eui" by the construction method of Kyu-Soo Park. 6.The Symbolic Meaning following the Idea of Mr. Chung, Hyun. describes well the line of thinking in our nation, and Idea of Loyalty & Filial Piety, a Man of Virtue and the Virtue of the Golden Mean. 7.As described above, I dare insist of the fact that the Construction Theory of "Sim-Eui" by Kyu-Soo Park during the letter period of Chosun Dynasty is full of our national manners and cus-toms with symbolizing meaning, construction's exquisiteness, clothes' materials and it's size most suitable to our people, to the exclusion of the defects in "Sim-Eui" of China and Japan.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.83-84
• /
• 2018

As the concentration of greenhouse gases in the atmosphere increases, the reduction of CO2 is gaining worldwide attention. In the construction industry, cement replacement materials such as fly ash and blast furnace slag were investigated to reduce CO2 emissions in cement production process. Precast concrete is used in the field after manufacturing in the factory in the form of pipes and bricks because of shortening construction period and cutting construction cost. According to the results of previous research, it is known that early CO2 curing in concrete using OPC or fly ash has an initial strength enhancement effect and can be used for precast concrete production. Therefore, the purpose of this study is to evaluate the strength improvement effect by confirming the initial strength improvement effect when blast furnace slag is mixed.