• KIEAE Journal
• /
• v.17 no.1
• /
• pp.15-21
• /
• 2017

Purpose: This study was on the economic feasibility of BIPV system, focused on comparison with construction cost of BAPV system depend on roof finishing materials, and to suggest basic data on the construction cost. Method: Construction cost of BAPV system was calculated, by selecting asphalt single, flat type roof tile, color steel plate, titanium zinc plate as roof finishing material of residential building and by sum up each cost for roof finishing construction and cost for 3kWp-volumed PV module installation. Also, the economic feasibility was analysed quantitatively by comparing the cost for BIPV system construction, installing same volumed PV module instead of roof finishing materials. Result: 1. By installing BIPV system instead of the roof finishing material, the cost of construction falls ; about 19% in case of the titanium zinc plate, which is the most expensive, and about 11% in case of the color steel plate. 2. Reducing amount of the construction cost gets larger because of installing BIPV module instead of the roof finishing material, as the construction cost for roof finishing material gets higher ; therefore, it is more economical than BAPV system in terms of whole cost of construction.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.2
• /
• pp.146-152
• /
• 2018

In the construction sector, new demands for aesthetics are increasing due to structural stability and improvement of living standard and consciousness level. On the other hand, Red Mud sludge is generated from aluminum hydroxide extraction process from Bauxite. Red mud sludge contains about 20% of $Fe_2O_3$ and represents a natural reddish brown. It is highly applicable to the construction industry. In this paper, red mud sludge with a water content of 50%, which is a by - product of the industry, was prepared as a liquid phase. The liquefied red mud was added to cement mortar and the strength and color difference of cement mortar were investigated according to the addition amount of liquefied red mud. As a result, the compressive strength decreased with increasing amount of liquefied red mud. The color of cement mortar containing liquefied red mud was found to be distributed in the range of YR series in all samples. As the amount of liquefied red mud increased, the color became darker.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.3
• /
• pp.97-111
• /
• 2023

Dynamic orphism images expressed with abstraction and construction in color are often found in modern fashion. Orphism stressing color is one of the many art trends that influence fashion. This work aims to examin its expressive effects and characteristics that appear in fashion and provide basic materials for fashion design study. This study proceeds with the following steps. First, the study takes on a theoretical examination of the orphism trend using a literature review. Second, based on its results, modern fashion's expressive features influenced by orphism are analyzed. Third, the study draws expression effects in modern fashion from these characteristics. The study coverage is confined to domestic and foreign collections released in the 21st century. The study contents come from an Internet-base domestic and international database and published material, including dissertations and books. Orphism expression effects are found in the following ways in modern fashion. First, it lies in the abstraction effect of color. This feature arrays flat geometric figure on the clothing surface and applies a strong sense of color inside it, as if color has an abstractive structured design. Second, it gives a dynamic sense visually to the clothes all at once by stressing the relation among and between the colors with powerful contrast. Third, it has a collage effect of color. This effect develops into an organic combination composed of geometric plane figures with intense complementary colors in a single piece of clothing. Expression types that presents the orphism effect in fashion are divided into clothing showing traditional orphism characteristics faithfully and clothing expressing conventional orphism characteristics mixed with modern trends. Further developed orphism fashion can be classified by the playful type, with graffiti added onto an orphism color structure, and the destructive type, where traditional orphism color orders are taken apart and reformed into a new color order.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.73-77
• /
• 2008

In this study, we would like to study on the application of roof exposure waterproofing method of joint stability through shiplap rubberized asphalt color sheet to complement problem of fracture, exfoliation and water leakage by existing roof exposure sheet waterproofing material joint weakness. Accordingly, examined basis performance and stability for joint that shiplap rubberized asphalt color sheet through test of that tensile strength, bonding strength, water permeability after bonding, peel resistance after bonding, lengthen resistance after bonding and hang resistance after bonding. The results of this study, waterproofing method to using shiplap rubberized asphalt color sheet is judged to solved fracture, exfoliation and water leakage problems happened in joint by problem was joint of exposure sheet by minimizing gap of joint being integration by shiplap.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.209-210
• /
• 2012

In this study, the following conclusions are drawn. First, the Inorganic terazzo tile flooring and LCC (Life Cycle Cost) analysis showed that the sum of the total cost of 150,304 won Inorganic flooring, terrazzo tile flooring minerals won 186,202 to 35,898 won, compared to 8.22% analysis of the cost savings that have been appearing. Second, if the color chip has a unique and elegant sentence patterns, beautiful and high-strength bonding and that the crack resistance was investigated.

• Journal of Environmental Science International
• /
• v.16 no.8
• /
• pp.929-939
• /
• 2007

Red mud is a waste generated by the aluminium industry, and its disposal is a major problem for this industry. Red mud has a reddish-brown color and superfine particle characteristics. So, it can be a promising pigment admixture for concrete industry. An experimental study was conducted to investigate the potential use of red mud in color concrete. The micro structures of red mud and iron oxide pigment such as porosity, pore size distribution, diameter of particle were analyzed with the aid of SEM, X-ray diffraction(XRD), and the infrared absorbance. Tests on physical properties of color concrete, such as strength, slump, early shrinkage crack patterns, and color characteristics were carried out and the results were reported in this paper.

• Korean Institute of Interior Design Journal
• /
• v.20 no.3
• /
• pp.152-160
• /
• 2011

Contemporary architecture pursues new method of Interpretation of Non-linear space as digital media appears. As various materials and new methods can be used due to developments in science and expansion of thinking, contemporary architectural color developed extensive possibilities. It means not only the change of drawings, method of architectural product and materials but also the change of value system for architectural space. Thus the purpose of this paper is to suggest interpretation of space applied by color structure, and this point of view was based on the three elements of color perception which are light source, reflector, and observer. According to this categorization, architectural color of exterior color, layer color and interaction color are explained via examples of colors recently used on the contemporary architectures. In summary, contemporary architecture can be explained by Non-construction space interpretation for intrinsic complex meanings. Therefore, it can be explained as moving space, collage, by picturesque space, moving blur color and emptiness of color. This pursues various point of views for space interpretation, therefore it can be developed to the identity of strengthening architectures' design concept.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.6
• /
• pp.607-614
• /
• 2015

Generally surface finishing of building is done with water paint that performs basic water repellency and resisting. When painting the exterior of the building with water paint, application method is easy and inexpensive and it has the advantage of building maintenance. But surface finishing of water paint is easy to discolored or aging due to ultraviolet light so the effect is not satisfying than expected. Therefore this study is to analyze durability of water-repellent paints mixed with water-repellents as outer surface finishing materials, and evaluate its feasibility. Color change and color different due to the accelerated time were tested, and the feasibility was evaluated based on the test results. The experimental results of color different, brightness different and chromaticity suggested that water-repellent paints mixed with water-repellents were suitable for finishing materials. Considering overall general durability performances, stable mixing ratios were 2, 5, and 8%.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.4
• /
• pp.541-550
• /
• 1994

A true color image is needed many data on the occasion of the transmission and storage. Therefore, we want to describe color image by a minority data without unreasonableness at eyesight. In this paper, it is presented 256 colormap construction method in RGB, YIQ/YUV space and common colormap expression method at merge between colormaps by reason of dissimilar original color image to display at a monitor for each other colormap at the same time. In comparison with processed result in RGB, YIQ/YUV space, it was measured by PSNR, standard variation, and edge preservation rate using sobel operator. Process time is 3second in colormap construction and 2second in merge between colormaps. In the PSNR value, RGB space has higher 0.15, 0.34 on an average than YIQ and YUV spae. Standard variation has lower in 0.15, 0.41 on an average than Yiq and YUV space. But in the data compression, YIQ/YUV space have about 1/3 compression efficiency than RGB space by reason of use to only 4bit of 8bit in color component.

• International Journal of Advanced Culture Technology
• /
• v.10 no.1
• /
• pp.10-16
• /
• 2022

This paper focuses on the aesthetic ideology and aesthetic style embodied in the work of 'Blue is the Warmest Color' to dissect it and examine the identity and construction of identity as a minority group in a postmodern context. Blue is the Warmest Color is a film that focuses on homosexual emotions in adolescent development, showing the budding love and emotional orientation of a 15-year-old girl's adolescence, and the ecstsy and torment that comes with an awakened consciousness. The evolutionary process of the characters' emotional orientations is dissected, pointing out that the central theme of the film is the concern for fluid identity and self-identity. Through the narrative and the setting of the characters' emotional patterns and the "Body Writing" of women, this paper further examine the typical variability and fragmentation of postmodern identity, and interpret in detail the content, messages and effects of the characters' dialogues in the film to illustrate the way in which the work expresses class and identity differences. The research method is based on textual analysis and theoretical research.