• Archives of Reconstructive Microsurgery
• /
• v.11 no.2
• /
• pp.146-152
• /
• 2002

As the defects of the penis caused by trauma, surgical amputation, or congenital abnormality give the patients both psychological trauma and functional impairment, reconstruction of the penis is mandatory. Radial forearm free flap is reliable one-stage procedure, which can reconstruct both the phallus and the urethra. Chang and Whang's adaptation of the "tube-in-a-tube" concept and its incorporation into a free flap design represented a major advance in microsurgical phallic construction. Biemer described a modification of the radial forearm flap design in which the neourethra was centered over the radial artery, but the phallic shaft was separated into two paraurethral swatches. The authors have performed one-stage penile reconstruction in two patients since 1998, using a radial forearm free flap. Our present design incorporates the original Biemer triple skin island and includes a fourth distal island for neoglans. One case was the amputation of the penis from felonious assault and the other case was the iatrogenic penile amputation from repetitive urologic surgery for congenital hypospadia. All patients showed aesthetically acceptable results and good tactile sensory recovery. Severe complications such as necrosis, fistula, or urethral stricture were not occurred. Biemer's method modified by the authors is reliable one-stage penile reconstruction providing good aesthetic and functional results.

• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.159-179
• /
• 2006

By using the current road design method that is based on the regulation about structure and facilities standard of the road and the route plan guide of a national road and the alignment optimization road design method which is studied in the inside and outside of country, this study operate the route plan of the sample study and compare and analysis the route character, consequently the current design method has local optimization that is formed the plan by the stage and the section. Alignment optimization road design has the system optimal route search. But cost function has limite that caused by construction parameter that is not included in cost function. So we design a road route included cost function in main fields. As a result, we obtain a realistic and economically road route. The alignment optimization road design model has to be made up some problems, like the change of vertical gradient in the tunnel section, though this defects it has a lot of merits as a geometric design tool, especially in the feasibility study and the scheme design.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.5 no.1
• /
• pp.34-47
• /
• 1985

The developing country, KOREA where does not possess the natural resources for traditional energy such as oil and gas, so. The nuclear energy is the most single reliable source available for closing the energy gap. For these reason, It is inavoidable to construct the nuclear power plant and to develop technology related nuclear energy. The rate of operation in large nuclear power facilities depends upon the performance of work system through design and construction, and also the applied technology. Especially, it is the most important element that safety and reliability in operation of nuclear power plant. In view of this aspects, Nuclear power plant is performed severe examinations during preservice and inservice inspection. This study provide an automation of analysis for volumetric examination which is required to nuclear power plant components. It is composed as follows: I. Introduction II. Inservice Inspection of Nuclear Power Plant ${\ast}$ General Requirement. ${\ast}$ Principle and Methods of Ultrasonic Test. ${\ast}$ Study of Flaw Evaluation and Design of Classifying Formula for Flaws. III. Design of Automation for Flaw Evaluation. IV. An Example V. Conclusion In this theory, It is classifying the flaws, the formula of classifying flaws and the design of automation that is the main important point. As motioned the above, Owing to such as automatic design, more time could be allocated to practical test than that of evaluation of defects, Protecting against subjective bias tester by himself and miscalculation by dint of various process of computation. For the more, adopting this method would be used to more retaining for many test data and comparative evaluating during successive inspection intervals. Inspite of limitation for testing method and required application to test components, it provide useful application to flow evaluation for volumetric examination. Owing to the characteristics of nuclear power plant that is highly skill intensive industry and has huze system, the more notice should be concentrated as follows. Establishing rational operation plan, developing various technology, and making the newly designed system for undeveloped sector.

• Korean Journal of Microbiology
• /
• v.37 no.1
• /
• pp.42-48
• /
• 2001

Allele rescue and sequence analysis of soo1-1 allele in Saccharomyces cerevisiae mutant LP0353 revealed that soo1-1 is identical to the previously reported ret1-1 allele, which has a base substitution of A for $G^{681}$ leading to an amino acid substitution of aspartic acid for $glycine^{227}$ in Soolp. However, it was revealed that the addition of osmotic stabilizer, such as 1.2M sorbitol can rescue the temperature sensitive phenotype of the ret1-1 mutant and that the soo1-1/ret1-1 mutation may confer defects in post-translational modification of proteins involved in the yeast cell wall biogenesis. Evidence for a putative role of 5th WD40 domain of the Soo1p/$\alpha$-COP in the construction and maintenance of cell walls was also presented by complementation test with deletion constructs of the SOOl.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2008.04a
• /
• pp.421-426
• /
• 2008

In case of the large-scaled indoor gymnasium that has been constructed in the local area, there are many instances for the use as multipurpose space where the public performances are possible such as leisure activity, lecture, assembling activity, drama, concert and so on for the resident together with the purpose of sporting facility. In order for utilization to the maximum of the function of such indoor gymnasium, the acoustic capabilities concerned with Definition of both Voice and Music are simultaneously required. However, in case of the large-scaled athletic facility, since it was designed with high ceiling-height in view of its characteristics, it forms a Sound Focus and then the sound is concentrating to the specific part, and because the vibration of sound is too loud due to its broad volume, the acoustic defects such as many Echoes are arising. On such viewpoint, based on the drawing of the indoor gymnasium that is scheduled to be built at B County, Chonbuk Province, this Study has proposed such indoor gymnasium equipped with the optimized acoustic condition passing through Acoustic Simulation Phase. As the result of Acoustic Simulation, we could design the indoor gymnasium that equipped with really satisfying acoustic performance 'after' reformation compared with 'before' reformation, and it is considering that such material could be utilized as the fundamental material that brings a curtailment effect of the construction cost and also enables us to improve the acoustic performance, at the stage of planning and designing for the similar sporting facility in the future.

• Plant Journal
• /
• v.8 no.3
• /
• pp.49-54
• /
• 2012

In this study, the way how we can find the defects of motor windings in advance will be discussed. The magnetic flux spectrum in the high frequency region of the large motor was analyzed based on the actual fault practices related with motor windings. In case of defective motor relative amplitude ratio of the stator slot frequency to its sideband was very high compared to that of healthy motor. And the defective signal related with motor windings was indicated in advance in the magnetic flux spectrum prior to over 1 month before failure. Considering this aspect it can be estimated that magnetic flux spectrum in the high frequency region has the excellent predictive diagnostic capability.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.2
• /
• pp.239-244
• /
• 2017

The demand for electric power is increasing every year. All facilities operating at power stations and all facilities used in transmitting high volumes of electric power are therefore expected to operate with a high degree of reliability. 6.6 kV XLPE 100 SQ 1C cables are used to deliver high levels of generated electric power. Depending on the method of manufacture, installation environment, and usage conditions, the deterioration processes of power cables start from the instant of operation. Cable junctions may break down in three years from the start of operation due to manufacturing or construction defects. We have invented the first device in Korea to monitor the status of live cables and installed these at Korea Western Power Co., Ltd.. We have set the criteria to determine deterioration status and specified the degree of deterioration at which one should replace the cables. In this paper, we present the effect of insulation layer and sheath on the insulation resistance status in cables.

• Journal of architectural history
• /
• v.18 no.5
• /
• pp.7-24
• /
• 2009

This stydy investigates H-shaped houses in 1930s and examines the characters and meanigs of Kim, Jong-Ryang's H-shaped houses as a new trial to urban Hanok of those days. He, who was concerned about the housing problem of Seoul, made an attempt to make various types of dwellings. Among them, this study focuses on Japanese-Korean Style H-shaped houses in Samcheong-dong. As the alternative housing type against other urban Hanok of Seoul in 1930s, the H-shaped houses of Kim, Jong Ryang had characters as follows : 1) H-shaped houses has two special characters. First, the whole space of a single house can be divided into a left region and a right region. Second, it can be divided to a front region and a rear region. In his H-shaped houses, the left/right division was expressed as folding of space-layers in parallel with urban streets. The front/rear division was used as classification of main-living space and sub-living space. 2) KJR's H-shaped Japanese-Korean Style houses were proved to be designed as urban housing against the extreme housing shortage of Seoul in 1930s. 3) His houses however were not accepted broadly as a urban house type because the construction cost of those was higher than an average and the element of Japanese style house was not adapted to Korea. Kim, Jong-Ryang's trial is valuable because it was the rare case of realization of many discourses as defects of existing house type. With more rigorous investigations on KJR's experiment in modern house type, we could understand the housing condition of Seoul in 1930s and modern urban houses more than before.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.1037-1040
• /
• 2013

Based on easy construction and operation compared with infra-structure communication netowrks, and rapid spreading of smart phone having high powered calculation ability and Wi/Fi function, usage of MANET(Mobile Ad-Hoc Network), which is configured with simply several terminals, is increased in applications of emergency communications, leisure, explorations. However, because of supporting difficulty of communication infra-structure makes some defects of malicious information intrusion like as hacking. In this paper, effects of transmission performance caused by information intrusion is analyzed. The results of published studies is based on environment of continuous intrusions, but this paper assumed intermittent attacking condition. In this paper, blackhole attack is used for intrusion type to MANET, voice traffic is used as a application traffic. Compuer simulation, based on NS-2, is used for measuring of performance parameters, and the analysis for the simulation results is shown as considerations of this paper.

• Tribology and Lubricants
• /
• v.31 no.2
• /
• pp.35-41
• /
• 2015

A water-pump located in the cooling area of a car circulates cooling water. A particular bearing element, known as a water-pump bearing, installed in the rotating part carries the entire load. The failure of this water-pump bearing has a direct impact on the failure of the automobile engine, and so securing its reliability is crucial. Several researchers have examined the design principles of the water-pump bearing, but there are no reports on the life characteristic of the bearing yet. Herein, we report the construction of test equipment to reproduce the spalling of the roller contact, which is the main failure mode of the chosen water-pump bearing. We chose the radial load as an accelerated stress factor and validated the failure mode by monitoring the surface defects. We conducted the accelerated life test after determining the accelerated stress level through a combination of finite element analysis and a preliminary test. In the life tests, we used an accelerometer to perform failure diagnosis. In the last stage of this study, we present a statistical reliability analysis. Thus, we fully estimated the shape parameter of the water-pump bearing, accelerating level on the load , and the lifetime (MTTF and B₁₀ life) under real use conditions, and finally proposed an interval estimation value considering the uncertainty of the estimated value.