• 제목/요약/키워드: Construction defects

검색결과 445건 처리시간 0.022초

해상보험증권의 해석상 작성자 불이익의 원칙의 적용에 관한 연구 (A study on the Application of the Contra Proferentem Rule in the Interpretation of Marine Insurance Policies)

  • 김성후;한낙현
    • 무역학회지
    • /
    • 제45권5호
    • /
    • pp.279-301
    • /
    • 2020
  • In the absence of any guidance under statutory law, such as the Rules for Construction of Policy, MIA 1906, judges should follow the general principles of interpretation that apply to all contracts. In simple terms, Contra Proferentem Rule means that if the contents of the terms and conditions are ambiguous, they are interpreted against the writer of the terms and conditions. In the Anglo-American Contract Law, the 'default rule' is an important judicial tool that can supplement defects in contract norms and reinforce the principle of private autonomy through gap-filling techniques related to the interpretation of contracts. In Korea, it is sometimes mentioned in case of precedent, and it has been established as a clear rule. This study analyzes the interpretation of terms and conditions is not in the form that the interpretation of other general contracts and other interpretation principles are valid, but contracts based on terms and conditions are also contracts, and as a general rule, the interpretation of terms and conditions is explained like the general contract interpretation.

도입 30년 시점에서 고속도로 보강토옹벽의 손상사례 분석 (Analysis of Damage Cases of Reinforced Earth Retaining Walls for Expressways at the Time of Introduction 30 Years)

  • 도종남;김낙영;김명일;박두희
    • 한국지반환경공학회 논문집
    • /
    • 제21권12호
    • /
    • pp.29-34
    • /
    • 2020
  • 보강토옹벽은 1970년대 프랑스에서 개발되어 국내에는 1990년대에 본격적으로 적용되기 시작하였다. 그리고, 현재는 1,300여개의 보강토옹벽이 고속도로 성토, 교량 접속부 등을 지탱하고 있다. 보강토옹벽 시공 기술은 나날이 발전하여 최근에는 보강토옹벽 자체를 교대구물화 하는 보강토교대를 개발하고 시범 도입할 정도가 되었다. 하지만, 고속도로 곳곳에 시공된 보강토옹벽에는 다양한 손상이 꾸준히 발생되고 있다. 이에 대한 원인은 설계, 시공, 유지관리 단계에서의 소소한 결함들로 분석이 되었다. 이에 대한 해결 방안은 개별 공정 하나 하나에 대한 중요성 인지하는 인식 변화이지만, 이는 하루아침에 형성되지 않는다. 본 연구에서는 고속도로 보강토옹벽 도입 30년을 맞이하여, 지금까지 보강토옹벽에서 발생된 손상 사례를 분석하여 유형화 하고, 이에 대한 대책을 제시하고자 하였다. 그 결과, 보강토옹벽에 발생하는 손상을 10가지 유형으로 나누었고, 각각에 대한 설계, 시공, 유지관리 단계에서의 원인과 대책을 도출하였다.

건설분쟁 중재제도의 차별화 및 개선방안에 관한 연구 (A Study on Differentiation and Improvement in Arbitration Systems in Construction Disputes)

  • 이선재
    • 한국중재학회지:중재연구
    • /
    • 제29권2호
    • /
    • pp.239-282
    • /
    • 2019
  • The importance of ADR(Alternative Dispute Resolution), which has the advantage of expertise, speed and neutrality due to the increase of arbitration cases due to domestic and foreign construction disputes, has emerged. Therefore, in order for the nation's arbitration system and the arbitration Organization to jump into the ranks of advanced international mediators, it is necessary to research the characteristics and advantages of these arbitration Organization through a study of prior domestic and foreign research and operation of international arbitration Organization. As a problem, First, education for the efficient promotion of arbitrators (compulsory education, maintenance education, specialized education, seminars, etc.). second, The effectiveness of arbitration in resolving construction disputes (hearing methods, composition of the tribunal, and speed). third, The issue of flexibility and diversity of arbitration solutions (the real problem of methodologies such as mediation and arbitration) needs to be drawn on the Arbitration laws and practical problems, such as laws, rules and guidelines. Therefore, Identify the problems presented in the preceding literature and diagnosis of the defects and problems of the KCAB by drawing features and benefits from the arbitration system operated by the international arbitration Institution. As an improvement, the results of an empirical analysis are derived for "arbitrator" simultaneously through a recognition survey. As a method of improvement, First, as an optimal combination of arbitration hearing and judgment in the settlement of construction disputes,(to improve speed). (1) A plan to improve the composition of the audit department according to the complexity, specificity, and magnification of the arbitration cases - (1)Methods to cope with the increased role of the non-lawyer(Specialist, technical expert). (2)Securing technical mediators for each specialized expert according to the large and special corporation arbitration cases. (2) Improving the method of writing by area of the arbitration guidelines, second, Introduction of the intensive hearing system for psychological efficiency and the institutional improvement plan (1) Problems of optimizing the arbitration decision hearing procedure and resolution of arbitration, and (2) Problems of the management of technical arbitrators of arbitration tribunals. (1)A plan to expand hearing work of technical arbitrator(Review on the introduction of the Assistant System as a member of the arbitration tribunals). (2)Improved use of alternative appraisers by tribunals(cost analysis and utilization of the specialized institution for calculating construction costs), Direct management of technical arbitrators : A Study on the Improvement of the Assessment Reliability of the Appraisal and the Appraisal Period. third, Improvement of expert committee system and new method, (1) Creating a non-executive technical committee : Special technology affairs, etc.(Major, supports pre-qualification of special events and coordinating work between parties). (2) Expanding the standing committee.(Added expert technicians : important, special, large affairs / pre-consultations, pre-coordination and mediation-arbitration). This has been shown to be an improvement. In addition, institutional differentiation to enhance the flexibility and diversity of arbitration. In addition, as an institutional differentiation to enhance the flexibility and diversity of arbitration, First, The options for "Med-Arb", "Arb-Med" and "Arb-Med-Arb" are selected. second, By revising the Agreement Act [Article 28, 2 (Agreement on Dispute Resolution)], which is to be amended by the National Parties, the revision of the arbitration settlement clause under the Act, to expand the method to resolve arbitration. third, 2017.6.28. Measures to strengthen the status role and activities of expert technical arbitrators under enforcement, such as the Act on Promotion of Interestments Industry and the Information of Enforcement Decree. Fourth, a measure to increase the role of expert technical Arbitrators by enacting laws on the promotion of the arbitration industry is needed. Especially, the establishment of the Act on Promotion of Intermediation Industry should be established as an international arbitration agency for the arbitration system. Therefore, it proposes a study of improvement and differentiation measures in the details and a policy, legal and institutional improvement and legislation.

6.6kV급 초전도 저항형 한류기 개발에 관한 연구 (Development of 6.6kV Resistive Superconducting Fault Current Limiters)

  • 이방욱;박권배;강종성;김호민;오일성;현옥배
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2004년도 하계학술대회 논문집 C
    • /
    • pp.1745-1747
    • /
    • 2004
  • In order to anticipate gradual increase of fault current in electric power systems, current limiting technology and current limiting device has been investigated for a long time. But the commercial use of current limiting device was delayed due to the lack of effective method to insert impedance to the elective power systems without loss and surplus defects. However, novel current limiting device, which use superconducting materials, was considered as a dream technology to be applied in a distribution and transmission lines. LG Industrial systems and KERPI started to investigate resistive type superconducting fault current limiters in order to develop 154kV fault current limiters and this year, we succeed to test 3 phase 6.6kV/200A fault current limiters. Based on these achievements, 24kV superconducting fault current limiters will be realized withing 3 years which could be tested in a real fields. In this paper, the developments of fault current limiting module which use YBCO thin films, cryogenic systems, the structure and construction of 3 phase fault current limiters and finally the test results of 6.6kV superconducting fault current limiters will be introduced.

  • PDF

음향시뮬레이션을 이용한 대형 실내체육관의 건축음향성능 개선에 관한 연구 (Architectural Acoustic Performance Renovation of the Large Gymnasium using Acoustic Simulation)

  • 윤재현;김재수
    • 한국주거학회논문집
    • /
    • 제19권4호
    • /
    • pp.41-48
    • /
    • 2008
  • In this study, an analysis is carried out on the acoustic design for an indoor gymnasium scheduled to be built at Buan County, Chonbuk Province. By way of background, the study examines the case of a large-scale indoor gymnasium that has been constructed in the local area of Hangan-myeon. There are many examples whereby this gymnasium could be used not only as a sporting facility for the residents, but also as a multipurpose space for public performances such as leisure activities, lectures, assembling activities, theatre and concerts etc. In order to maximize the functional utilization of such an indoor gymnasium, it is important to simultaneously verify the acoustic capabilities of the space in terms of Definition of both Voice and Music. However, as a large-scaled athletic facility, the building was designed with a high ceiling-height to accommodate its functional characteristics. The space forms a Sound Focus whereby the sound is concentrated at a specific part, and because the vibration of sound is too loud due to its broad volume, acoustic defects arise such as a significant number of Echoes. Using this gymnasium as a precedent, this study proposes an acoustic design based on the drawings of the indoor gymnasium that is scheduled to be built at B County, Chonbuk Province. The gymnasium is equipped with an optimized acoustic condition passing through the Acoustic Simulation Phase. From the results of an Acoustic Simulation, we can design an indoor gymnasium that is equipped with a considerably satisfying and improved acoustic performance compared with the building before it was reformed. It is also considered that the use of such materials can fundamentally reduce construction costs and can improve acoustic performance, at the planning and design stages for similar sporting facilities in the future.

시지각적 요소를 갖춘 건축물 위험징후 측정 모니터링 시스템 설치 가이드라인 개발연구 (Developing the Installation Guideline of Building Monitoring Systems for Hazardous Symptom Measurements with Visual Perception)

  • 김희재;김근영;신정재
    • 한국재난정보학회 논문집
    • /
    • 제16권2호
    • /
    • pp.374-382
    • /
    • 2020
  • 연구목적: 최근 노후한 안전관리 미비 시설물의 구조적 결함으로 인한 건축물 및 시설물 붕괴사고 등이 발생하고 있다. 본 연구는 전시 공간 건축물의 위험징후를 분석하고 계측기술을 개발하기 위해 시지각적 요소를 갖춘 건축물 센서 모니터링을 위한 최적의 센서 위치를 결정하는 상시 모니터링 시스템 설치가이드라인을 개발하는 것을 목적으로 한다. 연구방법: 위험징후 계측 기기의 구성요소, 설치위치, 기기의 경보 기준, 관리 방안 등을 제시한다. 연구결과: 센서의 위치를 결정하고, 통일된 시지각을 갖춤으로서 분석을 위한 신호처리 기술을 확보하고, Test-bed 운영 통해서 센서 모니터링 기반의 최적 '위험징후 감지장치'를 구성하는 방안을 제시하였다. 결론: 본 연구의 결과는 전시 공간 건축물 붕괴로 발생할 수 있는 재난으로부터 대비하고, 안전관리 역량을 강화에 기여할 수 있다.

전류 모드 CMOS를 이용한 다치 FFT 연산기 설계 (Multiple-valued FFT processor design using current mode CMOS)

  • 송홍복;서명웅
    • 한국지능시스템학회논문지
    • /
    • 제12권2호
    • /
    • pp.135-143
    • /
    • 2002
  • 본 논문에서는 전류모드 CMOS의 기본회로를 이용해 다치 논리(Multiple Valued Logic) 연산기를 설계하고자 한다. 우선, 2진(binary)FFT(Fast courier Transform)를 확장해 다치 논리회로를 이용해서 고속 다치 FFT 연산기를 구현하였다. 다치논리회로를 이용해서 구현한 FFT연산은 기존의 2치 FFT과 비교를 해 본 결과 트랜지스터의 수를 상당히 줄일 수 있으며 회로의 간단함을 알 수가 있었다. 또한, 캐리 전파 없는 가산기론 구현하기 위해서 {0, 1, 2, 3}의 불필요한(redundant) 숫자 집합을 이용한 양의 수 표현을 FFT회로에 내부적으로 이용하여 결선의 감소와 VLSI 설계시 정규성과 규clr성으로 효과적이다. FFT 승산을 위해서는 승산기의 연산시간과 면적을 다치 LUT(Look Up Table)로 이용해 승산의 역할을 하였다. 마지막으로 이진시스템(binary system)과의 호환을 위해 다치 하이브리드형 FFT 프로세서를 제시하여 2진 4치 부호기와 4치 2진 복호기 및 전류모드 CMOS회로를 사용하여 상호 호환성을 갖도록 설계를 하였다.

유리섬유 보강 아스팔트 혼합물의 현장 적용성 평가 (A Study on Field Application of Glass Fiber-reinforced Asphalt Mixtures)

  • 엄병식;유평준;함상민;서영찬
    • 한국도로학회논문집
    • /
    • 제18권3호
    • /
    • pp.67-74
    • /
    • 2016
  • PURPOSES : This study evaluated the field applicability and laboratory performance of glass fiber-reinforced asphalt (GFRA) mixtures. METHODS : The general hot-mix asphalt (HMA) and GFRA mixtures were paved in five sites, including three national highways, one express highway, and an arterial road, to evaluate field applicability and durability. The plant mixing and construction method for the GFRA were similar to those for the general HMA. The lab performances of the field samples were relatively compared through the mechanical measures from the Marshall stability, indirect tensile strength, and dynamic stability. The field performance was surveyed after a year. RESULTS : The lab tests verified the superior lab performances of the GFRA compared to the general HMA. The Marshall stability of the GFRA increased for about 128% of the general HMA. The indirect tensile strength of the GFRA was 115% greater than that of the general HMA. The dynamic stability of the GFRA resulted in 16,180 reps/mm, which indicated that high rut resistance may be expected. No noticeable defects, such as cracks or deformation, were observed for the GFRA sections after a year. CONCLUSIONS : The lab tests and field survey for the five GFRA sites resulted in superior performances compared to the general HMA. The relatively low-cost GFRA, which required no pre-processing procedures, such as polymer modification, may be a promising alternative to the polymer-modified asphalt mixtures. The long-term performance will be verified by the superior field durability of the GFRA in the near future.

보행(步行) 이앙기(移秧機)를 위(爲)한 무선자동제어(無線自動制御) 시스템의 개발(開發)(II) -공시기(供試機)의 포장실험(圃場實驗)- (Development of a Wireless Control System for Rice Transplanter of Walking Type(II) -Field Test of the Experimental Machine-)

  • 김창수;최규홍;민영봉;김성태
    • Journal of Biosystems Engineering
    • /
    • 제17권3호
    • /
    • pp.213-222
    • /
    • 1992
  • To develop the wireless remote opreating system of walking rice transplanter, this study was carried out for manufacturing the wireless remote control system acting upon the transplanter. The first report of this study contained about the construction and operating method of a developed remote control system for 2-row walking type transplanter. It is the second report about the field test for an experimental transplanter being attached a wireless control system and for a conventional transplanter. The test was executed to investigate the characteristics of velocity, rectilinearity, turning time, interval of roots and of rows, and field capacity in accordance with various engine speeds for an experimental transplanter. The measurements of this test were compared with those of the conventional transplanter. The obtained results were as follows : 1. The operating velocity of the experimental transplanter was faster than the conventional one when the high speed range of the engine but the variances were very large. 2. The rectilinearity, interval of raws and of roots, and the turning time of the experimental transplanter was inferior to the conventional one at some speed ranges of the engine. 3. Field capacity of the experimental transplanter was superior to the conventional one at high speed of the engine. 4. There were some disadvantages for the experimental transplanter to operate, because it was constructed without any aid devices, such as float and hydraulic system for instance. But if the remote control system of this study equip at the modern walking transplanter, it will be improved and utilized without defects which was revealed from this test.

  • PDF

FEM에 의한 CT시험편의 J 적분 해석에 관한 연구 (Evaluation of the J integral of a CT specimen by FEM)

  • 김원범
    • 한국산학기술학회논문지
    • /
    • 제15권11호
    • /
    • pp.6440-6445
    • /
    • 2014
  • 선박 해양플랜트를 비롯한 강구조물에서는 건조중 형성된 결함이나 사용중에 가해지는 여러 가지 하중등에 의하여 균열을 비롯한 손상이 발생한다. 따라서 균열의 해석을 위하여 균열의 세기를 여러 가지 방법으로 평가하며, 파괴역학적 수법에 의한 응력확대계수 K도 그 중의 한가지 방법이다. 본 연구에서는 이러한 목적으로 사용되는 강구조물용 강재의 응력확대계수 K의 평가를 위하여 특히 CT시험편에 대하여 J 적분을 사용하여 평가를 실시하였다. CT시험편의 J 적분의 평가에는 inhouse FEM program을 사용하였으며, 859개의 node 와 1618개의 element로 해석을 실시하였다. 계산결과 본 연구에서의 해석결과는 ASTM에서 제시하는 식에 의한 K값과 99%정도의 일치도를 나타내었다. 이상으로부터 본 연구에서의 시험편에 대하여 사용한 mesh size로 충분한 정도의 균열 해석이 가능함을 알 수 있었다.