• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.4
• /
• pp.105-116
• /
• 2000

The purpose of this paper is to minimize differences between landscape detailed design (hereafter 'design') and final landscape construction products in working sites (hereafter 'products'). Ten landscape sites constructed in recent two years were selected to examine the differences. Differences in quantities and quality between design and products were surveyed and the results were analyzed with the 'differential analysis method'. The method employed in this paper can be used as an optimization model to minimize the differences between design and products. This paper suggests that every landscape field should mark less than 13.672% calculated from the 10% of total amount for excellent construction products. This should be approved by the president, according to the Clause 20 of General Conditions of the Contract, divided by the ratio of quantities affecting mainly he average Difference in Value between Design and Construction(DVDC). This value can be the critical point from the differential analysis method for the optimal maximum DVDC between landscape design and final landscape construction products in fields.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.4
• /
• pp.36-46
• /
• 2022

It takes a relatively long time for construction companies that lack the ability to finance to adapt to construction policy in the construction industry. However, financial institutions rarely provide financial products to construction companies, particularly small and medium-sized construction companies, because their security capacity and credit rating are low. This study investigates the financial products needed for small and medium construction companies to adapt to policy changes. The demand of small and medium construction companies for financial products is analyzed by experts' advise and survey. And, when the investigated financial products for the construction industry are introduced, the legal systems in need of revision are analyzed. Based on the analyzed demand and the number of legal systems needing revision, the priority for the introduction of financial products to the construction industry is analyzed. Among the financial products investigated, the priority of "Expert consultation, such as accountant, tax accountant, lawyer, etc." is the highest. In future studies, the criteria and method of financial product development for high-priority financial products could be researched.

• KIEAE Journal
• /
• v.15 no.1
• /
• pp.147-154
• /
• 2015

Environmental impact assessment techniques have been developed as a result of the worldwide efforts to reduce the environmental impact of global warming. By using the quantification method in the construction industry, it is now possible to manage the greenhouse gas is to systematically evaluate the impact on the environment over the entire construction process. In particular, the proportion of greenhouse gas emissions at the production stage of construction material occupied is high, and efforts are needed in the construction field. In this study, intended for concrete products for the construction materials, by using the LCA evaluation method, we compared the results of environmental impact assessment and carbon emissions of developing products that have been applied low-carbon technologies compared to existing products. As a result, by introducing a raw material of industrial waste, showed carbon reduction. Through a comparison of the carbon emission reduction effect of low-carbon technologies, it is intended to provide academic data for the evaluation of greenhouse gases in the construction sector and the development of low-carbon technologies of the future.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.05a
• /
• pp.164-165
• /
• 2013

Currently, the process of selecting products such as construction materials and equipment in the design phase proceeds based on the reuse of products used in the previous projects or samples from design companies as well as information on the limited products provided from the website of several manufactures. In particular, it is urgently required to formulate a standard product information management system that can be utilized in the BIM-based design environment these days. In Korea, domestic construction information classification system was developed, but its utilization has been underestimated since continuous studies on the practical usability are still lacking. Therefore, this paper derived problem of domestic construction materials information system by comparing with abroad material information system. Issues and implication is derived in terms of (1) Input information (2) Provide information, and (3) Utilize Information.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.177-178
• /
• 2023

This study evaluated the compressive strength characteristics of steam curing mortar according to the substitution rate of industrial by-products, and showed a tendency to increase the compressive strength when gypsum was substituted up to 30%.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.16-17
• /
• 2020

The Temporary construction refers to the construction or dismantling of temporary structures installed for the construction of the main structure at the construction site, and the members constituting this temporary facility are called temporary equipment. Temporary equipment used in construction sites is mostly used products that are reused rather than new products, and it is necessary to consider performance degradation due to repeated use. This study is a preliminary study to develop the performance evaluation criteria applied to temporary equipment that is distributed and reused for secondhand. This study is to analyze the performance status of temporary equipment of used goods owned by rental companies by condition grade through performance tests.

• KIEAE Journal
• /
• v.14 no.1
• /
• pp.101-111
• /
• 2014

The Product Carbon Footprint Labeling has been run for more than four years by the Ministry of Environment and there are number of products labeled by KEITI(Korea Environmental Industry & Technology Institute), as for declaring products with their carbon emission during life cycle stages. There are several categories for certifying products by the characteristics of usage. Building products which are applied to a building as combined components or elements, are classified as production goods which means that the products are chosen by a business, not by a final consumer. In this paper, current status of PCF labeling has been reviewed focused on building products and the characteristics of carbon emission by a kind of product such as interior products, window products, structural products, system products and others. Until Dec. 2013, 82 products has been labeled and it covers about 53% among labeled product goods by the certification. Among the labeled building products, interior products are main products. From the results of comparison, variations of emission amounts by products have been found and the cause of variation could be explained by the purpose and material properties of products. However, the exact reason for variations cannot be acquired because of lack of information and the short operation period of the certification program. Further studies and more products are needed to be studied and analyzed focused on the emission characteristic by each product and to suggest reduction technologies for sustainable building products.

• Magazine of RCR
• /
• v.18 no.4
• /
• pp.87-93
• /
• 2023

• Journal of The Korean Digital Architecture Interior Association
• /
• v.10 no.2
• /
• pp.31-38
• /
• 2010

This study is to suggest a strategy and trend of products development by major construction companies to form a trend and to set the trend in housing market through investigation about brand image campaign for TV ad, individual design items, result of products development and special plans. It is the strategy for products development of construction companies surveyed to be divided into five kinds. First, the change from in the unit to outside. Second, centralization of design powers about products development through submit and the wining of a prize in the domestic & foreign design fair to publicize a excellent quality in a roundabout way. Third, reinforcement of service for support the habitability and design manual for secure uniform quality. Forth, investment in the environment-friendly housing and new recycling energy. Fifth, reinforcement of organizational power for improving production capability.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.262-265
• /
• 2003

We can agree that Quality Control in manufacturing industry have been improved successfully, but in construction industry, for example Sungsoo-Bridge broken out, Sampung Department store collapse, subway construction site explosion. and etc, it is difficult to be done. Because in manufacturing industry, they complete each other. If quality is not good. products aren't sold out. to sell more products they have to improve their products quality by themselves. However in construction industry they don't effort to improve quality if they get an order. Because if they get an order only completing their product is their job. There are engineering side, culturing side, and educational side to improve product quality. In this thesis I investigated evaluation system in construction industry. I am going to propose evaluation system by which they have effort to improve the quality even in construction industry.