• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.260-266
• /
• 2013

This study for establishing specific standards of atrium design aims to discuss design of atrium to consider energy performance according to the types of atrium of office building. In order to evaluate a type and a scale of atrium at the early design stage, modeling details of mass design were set as standards of conceptual design. In the experiment, Project Vasari was used to analyze modeling and energy consumption, based on the LOD 100-step suggested by AIA, because there is no guideline to specify a level of modeling details at each design process. From this analysis, the correlation among a simple-typed atrium and scale and energy load was understood, and the followings are the considerations for designing an atrium. First, the single-sided atrium reduced energy the most, and it was followed by three-sided, two-sided, four-sided and continuous-typed ones. On the whole, they could decrease energy by up to about 15%. Also, the atrium with a wide facade facing in the south was more favorable to reduce energy. Second, planning an atria within 10~30% of the whole building area was more energy efficient. Third, rather than the depth, adjusting the length in designing an atrium could reduce cooling and heating loads by 1.5% per 1m. As explained above, energy performance evaluation considering types and planning elements of atrium helps to assess alternatives in a reasonable way. In particular, considering the use of building needs to be preceded to select a type of atrium, although it is also important to consider its planning elements.

• Spatial Information Research
• /
• v.20 no.6
• /
• pp.129-137
• /
• 2012

For construction project in extreme cold region, it is essential to establish basic data on the site such as topographical data from the early stage of construction of planning and designing, and it is needed to frequently perform site investigation when necessary. However, extreme cold regions are characteristic of being at long distance and difficult in approaching, and special regions such as Antarctica, in particular, are hard to conduct site investigation. Although a site investigation may be conducted, those who can visit Antarctica are sufficiently limited so that most of the staff may participate in construction without knowledge of the site and increase the risk of errors in decision making or designing. In order to resolve such problems, the authors in this study identified methods of building wide-area topographical data and bedrock classification data of exposed areas via remote sensing and of building precise topographical data on the construction site. Also, the authors attempted to present methods by which such data can be managed and visualized integrally via three-dimensional GIS technology and all the participants in construction can learn sense of field and conduct necessary analysis as frequent as possible. The areas around the Jangbogo Antarctic Station were selected to be the research area for conducting effective integrational management and three-dimensional visualization of various spatial data such as wide-area digital elevation model, ortho-images, bedrock classification data, local precise digital elevation model, and site images. The results of this study may enable construction firms to analyze local environments for construction whenever they need for construction in extreme cold regions and then support construction work including decision making or designing.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.5
• /
• pp.79-89
• /
• 2014

This study was carried out to provide basic information to improve the surrounding ecosystems with benefit analysis and monitoring in cut slopes following establishment of a test construction to improve ecological environment in slopes of an expressway. Field tests from October 2012 to May 2013 were conducted in Seosejong IC and Shinyang IC. In order to improve the view of slopes, soil condition is an important factor. The earth slope, it is possible to introduce directly the plant. Stable construction method was applied, another foundation for planting is necessary. The mixing ratio of the seeds according to the experimental results, the difference was found at an early stage plants in Site I (Seosejong IC). Trees were planted on terraced structures were well coordinated and pictures. The growth of planted trees was good in Site II (Shinyang IC). Due to the use of plants in the landscape will continue to change. Thus, long-term monitoring and landscape analysis will be needed.

• Korean Journal of Construction Engineering and Management
• /
• v.4 no.4 s.16
• /
• pp.212-219
• /
• 2003

In construction project planning and control, a cost model performs a critical role such as cost determination on a contract stage and cost tracing. The model can maximize owner's profit and value within the project budget and optimize cost management works on overall construction implementation stages. A BoQ(Bill of Quantities) generally adopted in a unit price contract has been applied as an important tool for cost control and forecast. However a previous cost model based on the BoQ has shown limitations in that it requires too detailed information and heavy manpower on cost management and difficulty in keeping relationship with construction planning, scheduling and progress management. The each cost items and unit prices which constitute of construction works are individually very important management factors but the relative weight for each items and prices have a difference on the contents and conditions of each conditions of each construction works. In consideration of this structural mechanism of cost determination, this research is aimed at examining the critical factors affecting the construction cost determination and propose and verify a new cost forecasting model which is more simple and efficient and also keeps the accuracy of cost management.

• Korean Journal of Construction Engineering and Management
• /
• v.5 no.6 s.22
• /
• pp.101-109
• /
• 2004

The construction engineering field is less than $3\~5\%$ of the gross construction cost but engineering's role is very important because the performance of final facility is decided in the engineering stage. Nevertheless, before now government and private compares are more concentrated on construction works than making strategy to strengthen the competitiveness and technical development of investment in construction engineering sectors. Therefore this research have compared and analyzed the competitiveness of domestic construction engineering companies throughout analytic method 'SWOT' to those developing countries, which are potential big market objects, such as Russia Libya and Indonesia Such research was obtained through business trip & consultation with related specialists for the difficulties of domestic companies in advancing into overseas market. Moreover this research have analyzed the technical improvement of construction engineering companies and reason for competitiveness weaken by various aspects, it provides governmental and private plans to advance into overseas market Especially, to strengthen domestic companies into advancing overseas market it has suggested that tax & subsidy privileges, supporting plans for obtaining information of overseas and strategies cooperation with other organizations.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.11a
• /
• pp.121-131
• /
• 2012

This study is an analysis about BOD, COD, SS, T-N, T-P of 4Stage-BNR, MLE + CS(Coagulating Sedimentation), Bio-SAC BNR method of construction for 3 largest sewage treatment plants among 12 sewage treatment plants in Incheon. The purpose of this study is improving the operational effectiveness for Incheon sewage treatment plant by introducing the optimized method for quality of the discharged water.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.201-207
• /
• 2007

At an early design stage of rail track, dynamic analyses using a standard vehicle model of ADAMS/Rail are employed. In the real field, it is very difficult to find an optimal solution on the designing of rail track considering future operating vehicles because the construction of rail track should be done in the advance of vehicle selection and operation. Using a standard vehicle model of ADAMS/Rail, however the better selection among designed rail tracks is possible by comparing the dynamic analysis.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1824-1826
• /
• 2007

Since standardization project is composed of complicate system, such as vehicle, signal, electric power and railway, how to build management system of the project has influence on the success of the project for the first stage of the project. The computer system design tool supports to carry out requirement analysis, DB construction, and history and follow-up management efficiently. Therefore, the aim of this study is to investigate the method to optimize schema using computer system design tool.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.748-753
• /
• 2005

The stray current(leakage current) in DC railway system like as Metro Subway and LRT system happens electrical corrosion on theses superstructure facilities and also underground facilities that causes the public property losses. we must study and establish on the theoretical concept and concrete phenomena for electrical corrosion, In the construction period we intend to review and find out a lot of solution to minimize theses losses. we must investigate, measure and analysis natural atmosphere of these facilities locations to present a maintenance management guide for the upcoming operation stage.

• Environmental Engineering Research
• /
• v.17 no.1
• /
• pp.27-34
• /
• 2012

This paper deals with the evaluation of environmental impact of rail and road transport in South Korea. A framework of energy input-output analysis is employed to estimate the total energy consumption and $CO_2$ emission in acquiring and using a life cycle of passenger and freight transport activity. The reliability of $CO_2$ emission based on uncertainty values is assessed by means of a Monte Carlo simulation. The results show that on a passenger-kilometers basis, passenger roads have life cycle emissions about 1.5 times those of rail, while that ratio is ten times greater when the scope of evaluation regards the tailpipe. In the case of freight transport, on a million ton-kilometers basis, the value for road mode is estimated to be about three times compared to those of rail mode. The results also show that the main contribution of $CO_2$ emission for road transport is the operation stage, accounting for 70%; however, the main contribution for rail transport is the construction and supply chain stage, accounting for over 50% emission.