• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.109-111
• /
• 2002

It requires to study on accurate control skill for the technical improvement of servo system require. It needs to study on brake that has constant-torque speed range as load. In this paper, braking torque of eddy current brake between electromagnet stator and rotating disk are analyzed. The torque-speed characteristics and proper disk construction are presented in here. From the computer simulation results, it was found that eddy current braking torque is linear or approximately constant over the desired speed range depending on the rotor material, disk construction, pole number and pole displacement of stator, these are confirmed by experimental results.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2002.04a
• /
• pp.146-149
• /
• 2002

The procedure of practical training of architectural interior will be change for improvement of not only to complete design on the table but to be in employee market flexibly also. It's necessary to take the educational efficiency for the practical training in the course of interior architecture. The characteristic of interior space in the model for useful practice is residential space. The interior construction to be controled generally on the central axis of interior architecture, although there were several items of construction which divided architectural structure, electrical power, air control est. The process of practical training is to be established not only with object of training, grade of skill, materials and equipments and tools of it's prepare and working, but safety on the job training

• The Journal of Korean Academic Society of Nursing Education
• /
• v.11 no.2
• /
• pp.161-168
• /
• 2005

Purpose: The purposes are to identify the factors that influence work-based stressor experienced by clinical nurses and to provide a perceived causal structural model among these factors. Method: Data was collected and analyzed in 2 steps to apply a perceived causal structure : network analysis which was developed by Kelley(1983). Results: 1. The extracted causes from qualitative data were identified 10 categories ; over loaded work, relative feelings of deprived, inefficient duty schedule, negative attitudes of patient, burden of extra affair, inadequate administrative support, negative attitudes of physician, conflict with other personnels in hospital, lack of professional knowledge and skill, nursing service marketing burden. 2. Construction of the perceived causal structural model ; 1) The most central cause is over loaded work and the distal causes were inadequate administrative support, lack of professional knowledge and skill in the systems of causation. 2) The causes that have a number of outgoing link were over loaded work, inadequate administrative support, negative attitudes of physician. 3) The cause that have a number of incoming link was relative feelings of deprived. Conclusion: The network suggests that the first centre cause was related on over loaded work.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.6 no.1
• /
• pp.78-82
• /
• 2010

The feeder pipe of Main Primary Heat Transfer System in Wolsong Nuclear Power Plant was inspected by the Ultrasonic Phase Array technique in 2010. It is the first time to apply this method to the construction at Nuclear Power Plant in Korea. The time required for UT technique is less than RT method. The UT method doesn't need to evacuate personnel who works nearby inspecting area and doesn't need to wait developing of film. For these reasons, the UT method is the fastest method among the volumetric inspections. As a result of the examination, it became clear that main defect of the feeder pipe is the Lack of fusion in the welded area. Moreover, the rate of defect was reduced gradually as improvement of welder's skill. If welding machine has problem, the defect has tended to same pattern(occurred same position in the welding area) but these defects were founded without specific rules. For these reasons, the creation of defect is dependent on the skill of worker not on the automatic welding machine. This evaluation of defect signal and collecting data would be useful to further examination in ISI.

• Journal of architectural history
• /
• v.22 no.1
• /
• pp.41-50
• /
• 2013

In Korea, only a few wooden pagodas are extant because some wooden pagodas were lost due to artificial environment like war. Fortunately, only Eight Depictions Hall(Palsangjeon) in Beobjusa temple and main hall of Ssang-Bong Sa the main temple are extant. Though main hall of Ssang-Bong Sa the main temple shows old style in construction and outstanding creativity, survey and investigation for the hall have been poor. Accordingly, this study investigated pillar part, bracket structure part, and roof part composing pagoda body section which actively reflects structure and design skill compared to floor or upper part. And for better understanding, in the part that is similar to pagoda body section of main hall or needs examples, wooden pagoda in China or Japan was referred. Through this investigation, it was known that unique skill applied to main hall of Ssang-Bong Sa the main temple is based on plane in one room ${\times}$ one room - Ssang-Bong Sa the main temple has common form of wooden pagoda in appearance.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.3
• /
• pp.148-160
• /
• 2023

The air transport industry is experiencing unprecedented fluctuations in aviation demand through the Covid-19 pandemic, and is more focused than ever on maintaining and generating business profitability. During the pandemic, demand for air cargo has soared, and the conversion business from passenger aircrafts to freighters(P2F) is drawing attention as a new business in the aviation maintenance industry. This study derives important factors to be considered in order to successfully carry out the P2F project through a wide range of cases and related literature, and analyzes the relative importance of each factor using the analytic hierarchy process. Through a survey of 33 aviation maintenance experts with more than 20 years of field experience, the importance of main factors and their sub factors was determined and implications were drawn. As a primary result, in order to succeed in the P2F project, the main factors were identified in the order of skill, finance, and location. The most important sub factors for each main factors were identified in order of securing airframe modification skill, securing infrastructure construction cost, and creating P2F business complex and district. The quantified success factors suggested the critical direction for the successful development of Korea's P2F business, and presented viable and specific business strategies and implementation plans for each factors.

• KIEAE Journal
• /
• v.7 no.2
• /
• pp.39-46
• /
• 2007

A high-rise building construction in Korea has some problems in engineering, construction and management technologies although the high-rise building construction is recently booming. In addition, the lack of skilled construction labors is increasing, so the development for methods is needed to reduce the labors by prefabrication and mechanization. A re-bar work is one of very important works with regard to cost and schedule management in the high-rise building construction. Nevertheless, the re-bar work has some problems that it is needed many re-bars for joints linking and much time for lifting due to high-rise buildings, and it is difficult to level the skill of labors. So, in this study, the pre-fabrication of three-story height in column re-bars is proposed and the results of an implementation are analyzed and explored by a case study. As the results of case study, the pre-fabrication of three-story heights in column re-bars could reduce the cost in the re-bar work and accelerate the time in the structural frame work. In addition, the pre-fabrication of three-story height in column re-bars could solve the problems such as the waste of many re-bars for joints linking, and the lack of the skilled labors.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.311-314
• /
• 2008

While relevant fields of construction industry have rapidly changed, the adaptation (skill) level of individuals to apply or utilize them has slowly followed. By understanding how individuals resist and conform under this change of construction industry and which factors are important for the adaptation, much time, effort, and cost can be saved for organization operation and management, and these saved resources will be able to be effectively invested to others. Accordingly, for construction industry it is necessary to understand and study how the users fit into the rapid technological change. Through this research, therefore, a systematic guideline should be created for the relevant fields of construction industry. For this research, the characteristics of individual personalities and behaviors based on the traditional model was observed and factors that contribute to the resistance and their mutual relations were theoretically identified and categorized, and then a conceptual and figurative model to show the mutual relation between the identified resistive factors was suggested.

• The korean journal of orthodontics
• /
• v.50 no.4
• /
• pp.229-237
• /
• 2020

Objective: To evaluate the construction reproducibility of a composite tooth model (CTM) composed of an intraoral-scanned crown and a cone-beam computed tomography (CBCT)-scanned root. Methods: The study assessed 240 teeth (30 central incisors, 30 canines, 30 second premolars, and 30 first molars in the maxillary and mandibular arches) from 15 young adult patients whose pre-treatment intraoral scan and CBCT were available. Examiner-Reference (3 years' experience in CTM construction) and Examiners-A and Examiner-B (no experience) constructed the individual CTMs independently by performing the following steps: image acquisition and processing into a three-dimensional model, integration of intraoral-scanned crowns and CBCT-scanned teeth, and replacement of the CBCT-scanned crown with the intraoral-scanned crown. The tooth axis angle in terms of mesiodistal angulation and buccolingual inclination of the CTMs constructed by the three examiners were measured. To assess the construction reproducibility of CTMs, intraclass correlation coefficient (ICC) assessments were performed. Results: The ICC values of mesiodistal angulation and buccolingual inclination among the 3 examiners showed excellent agreement (0.950-0.992 and 0.965-0.993; 0.976-0.994 and 0.973-0.995 in the maxillary and mandibular arches, respectively). Conclusions: The CTM showed excellent construction reproducibility in mesiodistal angulation and buccolingual inclination regardless of the construction skill and experience levels of the examiners.

• The Journal of the Korea Contents Association
• /
• v.10 no.8
• /
• pp.66-72
• /
• 2010

This paper is focus on 3D virtual building design technic that construction materials are showed by components and these components are part of patterns, and building design using pattern is possible. To use this technique in process of construction, design, analysis, change, assembly, etc, we will develop flexible building design system that it supports efficient building change and low cost by construction design simulation. Specially also the designer and the user use a pattern and easily will be able to change the building and according to change pattern information of the materials, design of the buildings which are changed creates automatic. Also we will implement knowledge retrieval engine which is necessary to personal skill or visualization.