• 드라이브 ㆍ 컨트롤
• /
• 제16권3호
• /
• pp.33-41
• /
• 2019

This study presents the development of a lifetime test bench for the strain wave reducer which is a precision gear reducer of the robot to realize fault diagnosis and failure prognostics. To this end, the lifetime test bench was designed to detect the vertical forward/reverse direction rotation load. Through the lifetime test bench, it is possible to apply the same load spectrum from robot working scenarios. We developed a data integration gateway for fault data collection. Through the development of dedicated software for fault diagnosis and failure prognostics, these data from vibration, noise and temperature sensors were collected and analyzed along with the operation of the lifetime evaluation.

• 드라이브 ㆍ 컨트롤
• /
• 제18권1호
• /
• pp.31-38
• /
• 2021

This study presents a new principle for driving the robot aimed at reducing the position error for the boresonic examination of turbine rotor. The conventional method of inspection is performed by installing manipulator onto the flange of the turbine rotor and connecting a pipe, which is then being pushed into the bore. The longer the pipe gets, the greater sagging and distortion appear, making it difficult for the ultrasonic sensor to contact with the internal surface of the bore. A pneumatic pressure will ensure the front or rear feet of the robot in close contact with the inner wall to prevent slipping, while the ball screw on the body of the robot will rotate to drive it in the axial direction. The compression force required for tight contact was calculated in the form of a three-point support, and a static structural simulation analysis was performed by designing and modeling the robot mechanism. The driving performance and ultrasonic detection ability have been tested by fabricating the robot, the test piece for ultrasonic calibration and the transparent mock-up for robot demonstration. The tests have confirmed that no slipping occurs at a certain pneumatic pressure or over.

• 드라이브 ㆍ 컨트롤
• /
• 제13권4호
• /
• pp.52-58
• /
• 2016

The mechanical design for biped walking of a humanoid robot doing the Argentina Tango is presented in this paper. Biped walking has long been studied in the area of robotic locomotion. The aim of this paper is to implement an Argentina Tango dancer-like walking motion with a humanoid robot by using a trajectory generation scheme. To that end, this paper uses blending polynominals whose parameters are determined based on PSO (Particle Swarm Optimization) according to conditions that make the most of the Argentina Tango's characteristics. For the stability of biped walking, the ZMP (Zero Moment Point) control method is used. The feasibility of the proposed scheme is evaluated by simulating biped walking with the 3D Simscape robot model. The simulation results show the validity and effectiveness of the proposed method.

• 로봇학회논문지
• /
• 제4권1호
• /
• pp.74-80
• /
• 2009

This paper presents a remote monitoring and simulation system for a building cleaning mobile robot. It provides a tool of convenient 3D graphical map construction including network camera image viewer and status information of the robot. The 3D map is reconstructed from existing 2D building CAD data with DXF format using OpenGL graphic API. Through this system, it is possible to monitor and control the cleaning mobile robot from remote place. A practical experiment is performed to show the reliability and convenience of the monitoring system. The proposed system is expected to give efficient way of control and monitoring to building cleaning mobile robot.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.132.4-132
• /
• 2001

Field robot represented by excavator can be applied for various kinds of working in manufacturing, construction, agriculture etc. because of the flexibility of its multi-joint mechanism and the high power of hydraulic actuators. In general, the dynamics of field robot have strong coupling, various kinds of non-linearity, and time varying parameters according to working conditions. Therefore, it is very difficult to describe the system well, and design controller systematically based on its model. This paper established the mathematical model of field robot driven by electro-hydraulic servomechanism and constructed the adaptive control system robust to external load variations. The proposed control system for the field robot was evaluated by the computer simulation, and the performance results of trajectory tracking were compared with that of PID control system.

• Journal of Mechanical Science and Technology
• /
• 제17권2호
• /
• pp.230-238
• /
• 2003

In this paper, a three-fingered anthropomorphic robot hand, called SKK Robot Hand 1, is presented. By employing a two-DOF joint mechanism, called Double Active Universal Joint (abbreviated as DAUJ from now on) as its metacarpal joint, the hand makes it possible to mimic humanlike motions. We begin with addressing the motivation of the design and mention how the anthropomorphic feature of a human is realized in the design of SKK Hand I Also, the mechanism of the hand is explained in detail, and advantages in its modular design are discussed. The proposed hand is developed for use as a testbed for dextrous manipulation. It is expected to resolve the increasing demand for robotic applications in unstructured environments. We describe its hardware construction as well as the controller structure including the preliminary results of experiments.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
• /
• pp.17-20
• /
• 2001

This study is regarding the autonomous navigation of the mobile robot which operates through a sensor, the Omnnidirectional Vision System which makes it possible to retrieve the real-time movements of the objects and the walls accessing the robot from all directions and to shorten the processing time. After attempting to extend the field of view by using the reflection system and then learning the point of all directions of 2$\pi$ from the robot at the distance, robot recognizes three-dimensional world through the simple image process, the transform procedure and constant monitoring of the angle and distance from the peripheral obstacles. This study consists of 3 parts: Part 1 regards the process of designing Omnnidirectional Vision System and part 2 the image process, and part 3 estimates the implementation system through the comparative study process and three-dimensional measurements.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.80-82
• /
• 2004

Personal robot consist of various modules that have independent functions. Because personal robot has requirement that support various construction for user's tendency. Therefore, Middleware mechanism at support not only personal robot's main functional element but also embedded modules functional elements is required. Each module have various heterogeneous network interfaces and variable services and variables. Therefore, Middleware must support these various network interfaces. This paper, pointed in Controller Area Network(CAN) inreface that usually used in embedded system for control. For connect various heterogeneous network interfaces (Ethernet, RS232 etc..), it is necessary to modify bagic CAN frame format. And also make some kind of BUS topology for CAN network.

• 드라이브 ㆍ 컨트롤
• /
• 제11권3호
• /
• pp.22-30
• /
• 2014

In this research, the energy stability level method is used for examining the stable state of Field Robot under effects of swing motion, at particular postures of manipulator, and terrain conditions. The energy stability level is calculated by using the dynamic models of Field Robot, subjected to the concept of equilibrium plane and support boundary. The results, simulated by using computing program for estimating the potential overturning of Field Robot, supply useful predictions of stability analysis for designers and operators.

• 드라이브 ㆍ 컨트롤
• /
• 제19권1호
• /
• pp.1-7
• /
• 2022

Recently, a re-painting robot was developed to semi-automatically conduct blasting work in bridge spaces to improve work productivity and worker safety. In this study, a vision sensor-based monitoring module was developed to automatically move the re-painting robot along the path. The monitoring module provides direction information to the robot by analyzing the boundary between the painting surface and the metal surface. To stably measure images in unstable environments, various techniques for improving image visibility were applied in this study. Then, the driving performance was verified in a similar environment.