• 화약ㆍ발파
• /
• 제32권2호
• /
• pp.25-30
• /
• 2014

건설공사 현장에서 발생하는 소음 진동은 일시적이고 간헐적으로 발생하지만 그 영향은 매우 크다. 건설기계의 적은 소음 진동이라도 발생하면 먼 거리까지 전달되어 차음 및 방진 등의 대책이 어려워 이를 해결하기 위해 본 연구에서는 건설장비의 소음 진동 안전기준을 30m로 적용하였고 발파소음은 60m, 진동은 160m로 적용하였다. 지금까지는 2D를 사용한 모델링을 주로 사용하였으나 건물이나 산과 언덕 등 크기와 높이를 고려한 3차원 3D 모델링으로 측정 분석하여서 정확도를 높였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.269-274
• /
• 2007

With the importance of comfortable environment, research about noise reduction of construction is consisting much. If construction receives the input force, noise will be generated thereby. We must predict vibration and noise characteristic to reduce structured borne noise, and construction which become a basis of such research is plate. In order to predict the radiating noise from the vibrating surface. It is required to know the velocity distribution of vibration surface exactly. It is good to use bead for reducing vibration and noise of plate. In this study, we have analyzed structure-borne noise of plate with bead and compare with plate that there is no bead about equal exciting force.

• 기술사
• /
• 제33권3호
• /
• pp.30-34
• /
• 2000

In recent years, disputes are on the increase that noise and vibration by construction equipments and blasting do damage to livestock farming families around construction sites in the construction of a road or a railway. Therefore, the following ways of improvement were presented in solving the existing problems of livestock disputes. $.$ To minimize the damage of livestock farming families by effect assessment of noise and vibration in the region expected to be damaged before the start of construction $.$ To maintain a thorough management system that can reduce noise and vibration during construction work $.$ To apply an adequate measurement method of noise and vibration taking field conditions into consideration

• 한국건설관리학회논문집
• /
• 제11권3호
• /
• pp.55-63
• /
• 2010

건설과정에서 발생하는 소음 진동에 대한 민원은 꾸준히 증가하고 있지만 공사 중 발생하는 소음 진동은 대부분 시공단계에서만 관리되고 있다. 이는 시공단계에서 발생하는 소음 진동 관리의 한계라고 판단되며, 공사 중 발생하는 소음 진동을 저감하기 위해 설계단계에서의 관리가 필요하다는 것을 의미한다. 본 논문의 목적은 공사 중 발생하는 소음 진동 관리의 효율성을 높이기 위해 설계단계에서 고려할 수 있는 공사 중 발생하는 소음 진동의 관리항목을 제시하고 이를 설계자가 직접 평가할 수 있는 평가시트와 관리 항목의 이해를 돕기 위한 매뉴얼을 개발하는 것이다. 이를 위해 기존 연구문헌을 검토 분석하여 설계단계에서 고려해야 할 공사 중 소음 진동의 관리항목을 식별하였고, 항목의 적정성을 검증하기 위해 환경전문가와 면담을 실시하여 9개 항목을 확정하였다. 항목간의 중요도 산정과 우선순위 식별을 위해 AHP(Analytic Hierarchy Process)기법을 적용하였다. 그 결과 설계단계에서 공사 중 발생하는 소음 진동을 관리하는데 가장 효율적인 항목들은 저소음 저진동 공법선정, 발파공사에 의한 소음 진동 저감방안, 소음 진동방지시설 설치 및 배치계획 순으로 나타났다. 본 연구의 성과는 공사 중 발생하는 소음 진동을 효율적으로 관리하여 환경분쟁 및 민원을 사전에 예방하고, 성공적인 건설사업을 위해 유익하게 활용될 것으로 기대된다.

• 한국지반환경공학회 논문집
• /
• 제11권7호
• /
• pp.15-24
• /
• 2010

말뚝 항타로 인한 소음 진동공해는 건설현장 주변에 피해를 주고 민원을 발생하게 하여 심한 경우에는 공사가 중단되는 사태까지 발생하게 된다. 이를 해결하기 위해 건설 기술자들은 저소음 저진동말뚝공법의 개발을 위해 부단한 노력을 해왔다. 이러한 노력 중의 하나인 무소음 무진동을 위한 스크류콘크리트말뚝공법은 말뚝 본체를 회전 압입시켜 지중에 말뚝을 관입시키는 방법으로 소음과 진동의 발생이 거의 없고 지지력을 극대화 할 수 있는 장점을 가지고 있다. 무소음 무진동을 위한 기성스크류말뚝공법은 국내 외에서 개발되어 있지 않으며 본 연구진에 의해 시제품 제작을 완료하였고 두차례 시험시공을 통하여 시공법을 설정하였다. 본 논문에서는 무소음 무진동을 위한 스크류콘크리트말뚝공법의 특징에 대해 설명하였고 두차례 시험시공 및 이를 통한 시공법 설정에 대하여 설명하였다. 그리고 이러한 시험시공 결과를 토대로 근입깊이와 지반조건에 따라 스크류콘크리트말뚝을 지중에 관입시키는 시공방법에 관한 연구를 수행하였다.

• 한국소음진동공학회논문집
• /
• 제19권8호
• /
• pp.802-808
• /
• 2009

In this paper, the experimental study on the identification of noise sources and noise transmission paths was carried out for the cabin noise control of construction equipment. In order to investigate noise and vibration characteristics of cabin structure, sound absorption, transmission, and radiation tests were performed using cabin assembly models. The noise/vibration source levels were obtained from the real cabins of wheel loader and excavator. Using transfer functions of cabins and real cabins' source data, cabin noise was decomposed into airborne and structureborne noise transmissions. Finally noise sources and major transmission paths were successfully identified for wheel loader and excavator's cabins.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.84-89
• /
• 2009

In this paper, the experimental study on the identification of noise sources and noise transmission paths was carried out for the cabin noise control of construction equipment. In order to investigate noise and vibration characteristics of cabin structure, sound absorption, transmission, and radiation tests were performed using cabin assembly models. The noise/vibration source levels were obtained from the real cabins of wheel loader and excavator. Using transfer functions of cabins and real cabins' source data, cabin noise was decomposed into airborne and structureborne noise transmissions. Finally noise sources and major transmission paths were successfully identified for wheel loader and excavator's cabins.

• 환경영향평가
• /
• 제18권1호
• /
• pp.21-30
• /
• 2009

The study show that things about the noise control are indicated at The Noise & Vibration Control Act and the other Act. Also, the details program and total government ministries' program for the noise control are indicated what are the advance noise control plan. The study consist of the four part which are "Draw up the environmental noise infrastructure plan; the install shall be done the noisemap & the automatic noise measurement devices", "Resetting of environmental noise standard at the application area and Introduce of indoor noise; the guide for region classification of the noise standard & indoor noise", "Setting of aircraft noise standard and Program of measurement point operation; the noise-assessment-standard shall change from WECPN to new index($L_{den}$, $L_{dn}$, $L_{Aeq\;24h}$) & the operation and control of aircraft noise measurement changes from local environmental office to central control center" and "The method of noise regulation at construction site and the plan on making of standard for vibration regulation; It shall be made that the guideline of construction noise should include a target-construction, noise standard etc & the ministries shall unify control about construction vibration of the blasting vibration". The advance noise-policy will improve efficiency to deal with civil appeal & damage on residents about noise.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.150-151
• /
• 2022

Blasting is a method that uses explosives to crush the ground. This method is a highly efficient ground cleaning method that can secure high efficiency in a short time. However, explosions can damage local properties and produce high noise and vibration. Therefore, it is important to be careful because there are disadvantages such as the occurrence of many complaints from the surrounding area. In this paper measured and analyzed the noise and vibration generated during blasting at the blasting site in Korea. The noise and vibration generated during blasting were measured by ES03303.2b and ES03402.2a at a distance of 6 m, 12 m from the blasting point. As a result of the measurement, there was little difference between small and medium scale except for precision vibration blasting at a distance of 6m, but noise difference according to blasting scale was evident at a distance of 12m. As a result of the measurement, the maximum noise level was reduced to 5.5 dB(A) and the vibration level was reduced to 7.7 dB(V). In the future, the reliability of the test results can be further improved through additional tests, and it is judged that noise and vibration prediction models based on blasting methods, amount of charge, measuring distance, etc. can be developed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.109-112
• /
• 2005

Since 1989, when the first European noise regulation against construction equipments came into force, much investigation had been devoted to reduce the noise and had produced the remarkable improvement in noise reduction technology. EU Directive 2000/14/EC Stage 2, more stringent noise regulation, is going to be implemented from Jan. 2006. The technology trends and examples for noise reduction in typical construction equipment R&D is described briefly.