• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1479-1487
• /
• 2013

The river levee collapse and flood damages are dramatically increased due to the floods which caused by abnormal weather nowadays. The counterplan like TDR(Time Domain Reflectometry) river levee leaking exploration technique is needed to that levee failure causes of levee failure such as levee failure by penetration, piping, inadequate levee materials selection, poor compaction are almost 52% of the failure. This research practiced various comparing experiments of existing TDR(probe and tube types) and developing CAP type TDR to evaluate acrylic small CAP mould and low-cost TDR levee leaking monitoring system which was used probe type TDR. As the result, evaluated TDR system had 20cm critical exploration performance which was a leaking exploration performance, The functional ratio of TDR exploration sensitivity of dry density was sensitive more than 3 times than dry density, and weathered granite soil foundation water contents(w)-dielectric constant(${\epsilon}$) corelation formula was suggested to measure functional ratio on developing cap type TDR system.

• The KIPS Transactions:PartC
• /
• v.18C no.5
• /
• pp.303-316
• /
• 2011

Data aggregation is important in wireless sensor networks. However, it also introduces many security problems, one of which is that a compromised node may inject false data or drop a message during data aggregation. Most existing solutions rely on encryption, which however requires high computation and communication cost. But they can only detect the occurrence of an attack without finding the attacking node. This makes sensor nodes waste their energy in sending false data if attacks occur repeatedly. Even an existing work can identify the location of a false data injection attack but it has a limitation that at most 50% of total sensor nodes can participate in data transmission. Therefore, a novel approach is required such that it can identify an attacker and also increase the number of nodes which participate in data transmission. In this paper, we propose a monitoring-based secure data aggregation protocol to prevent against a compromised aggregator which injects false data or drops a message. The proposed protocol consists of aggregation tree construction and secure data aggregation. In secure data aggregation, we use integration of abnormal data detection with monitoring and a minimal cryptographic technique. The simulation results show the proposed protocol increases the number of participating nodes in data transmission to 95% of the total nodes. The proposed protocol also can identify the location of a compromised node which injects false data or drops a message. A communication overhead for tracing back a location of a compromised node is O(n) where n is the total number of nodes and the cost is the same or better than other existing solutions.

• Tunnel and Underground Space
• /
• v.22 no.5
• /
• pp.310-320
• /
• 2012

This paper describes the design and construction of a 2-arch tunnel with varying section. This new design has advantages of 2-arch tunnels, which is rather expensive, but is still economically competitive compared to parallel tunnels. Economic analysis was also conducted. To secure the stability of the varying section tunnel, excavated part was reinforced by tie-bolts and RRS, and 2-arch part was supported by EPS blocks and concrete walls. Stability of the pillar was theoretically analyzed and also examined by numerical simulations for various widths. Displacement monitoring was conducted and results were compared with numerical results. Economic analysis showed reductions in construction cost and period by 11% and 10 months respectively.

• Korean Journal of Agricultural Science
• /
• v.47 no.4
• /
• pp.1057-1069
• /
• 2020

For most upland crops in Korea, underground water is used to ensure an adequate water supply. Thus, surface water storage tanks are needed to supply surface water from reservoirs or streams. This study discusses the design, manufacture and monitoring of a water storage tank capable of reliably supplying water to crops and preventing the inflow of floating debris. The study was conducted in an apple orchard in Yesan-gun, Chungcheongnam-do in Korea. Based on the water requirements of the crops and size of the orchard, a required flow volume of about 0.6 ㎥·h-1 was determined, along with a surface water storage tank capacity of 1.2 ㎥. Following a comparison with other materials, stainless steel (STS) was used to construct the water tank. The tank was designed to provide 14 hours of irrigation, enabling a small-capacity, cost-efficient tank design to be used. A surface water irrigation test was performed using the surface water storage tank. The average surface water irrigation flow rate was 0.00045 ㎥·m-2·h-1. The water quality test showed that the pH, suspended solids (SS), total nitrogen (TN), and total phosphorus (TP) values satisfied the reference values for agricultural water. The test results showed that the surface water storage tank evaluated in this study allows for crop irrigation when there is a lack of groundwater during droughts.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.1
• /
• pp.1-14
• /
• 2013

The world largest land reclamation project in the name of Saemangeum(Ariul) from 1991 to the present has been implementing in a part of the west coast of Korea. In the Saemangeum reclamation project, the large-scale project cost is used for the landfill reclamation. A number of landfill reclamation methods have been studied in order to reduce the large-scale cost of the Saemangeum project under construction. There are many studies related to the on-site real-time monitoring with mobile systems for operating a wide range of landfill. In order to apply the work method for efficient cost-savings in the landfill operations to the Samangeum project, this paper develops a mobile management system that is composed of a mobile interface module, a data server module for data transmission and storage, and an analysis server module to analyze the input data and derive the results. The mobile system is designed by analysing user's and system requirements, functional interactions, and data flow using unified modeling language(UML). The user interface is developed for the on-site real-time monitoring through the status and related attributes of land reclamation by using the digital maps of the Samangeum coverage via mobile devices. Finally, a mobile management system would be developed that can provide a 3D GIS service based on the Dry Internal Project Site Digging Reclamation Method(DIPSDRM).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.77-86
• /
• 2020

Power quality problems caused by feeder voltage drop and extension construction cost problems can occur with the increasing utilization rates of the existing fixed-type EV (electric vehicle) charger. Moreover, EV users might not be able to access the EV charger due to a lack of EV charging facilities. Therefore, this paper proposes an MPSD (movable power supply device) for EVs to overcome user inconvenience caused by the insufficient number of chargers and extension cost issues. The proposed MPSD was mainly composed of a PV (photovoltaic) system, ESS (energy storage system), EV charging system, and monitoring and control system. Furthermore, there are three operation modes available to enhance the flexibility of the MPSD application, depending on the situation. This paper also presents an economical evaluation modeling using the present worth method to consider the cost and benefit elements. The simulation results based on proposed modeling showed that MPSD is more economical than the existing EV charger. Moreover, its profit can be increased significantly depending on the distance to the installation point.

• Journal of the Institute of Convergence Signal Processing
• /
• v.10 no.3
• /
• pp.207-213
• /
• 2009

The quality of tap water on the whole water-supply system, from a large filtration plant to a private faucet, has to be guaranteed the standards of drinking water. At this point in time, however, the supply process of the tap water has not been monitored and managed scientifically. The piped water, especially the most small-scale reservoirs(underground or overhead type) are always exposed to various contaminations and impurities. Recently monitoring systems of water-quality were spread on some large filtration plants or distributing reservoirs. In particular, the water quality monitoring method using the internet is adopted into some local government whose inhabitants can check up the water quality anytime and anywhere. The construction of this system that has to apply a large scale needs, and has a limitation on the small water-supply system, such as apartments, public facilities and small-scale underground or overhead reservoirs. In this work, we suggest the integration system of individual water-quality sensor modules that have a low price. By using the developed integration system and online monitoring program operated on the internet, the system managers of reservoirs can monitor and manage water-quality characteristic values of drinking water in online. Since the proposed system was modularized, the system can be applied easily into various reservoirs with a low cost and regardless of its scale, small or large.

• Journal of Marine Bioscience and Biotechnology
• /
• v.11 no.2
• /
• pp.52-61
• /
• 2019

Over the past few decades, microalgae-based biotechnology conjugated with innovative CRISPR/Cas9-mediated genetic engineering has been attracted much attention for the cost-effective and eco-friendly value-added compounds production. However, the discharge of reproducible living modified organism (LMO) into environmental condition potentially causes serious problem in aquatic environment, and thus it is essential to assess potential environmental risk for human health. Accordingly, in this study, we monitored discharged genetically modified microalgae (GMM) near the research complex which is located in Daejeon, South Korea. After testing samples obtained from 6 points of near streams, several green-colored microalgal colonies were detected under hygromicin-containing agar plate. By identification of selection marker genes, the GMM was not detected from all the samples. For the lab-scale environmental risk assessment of GMM, acute toxicity test using rotifer Brachionus calcyflorus was performed by feeding GMM. After feeding, there was no significant difference in mortality between WT and transformant Chlamydomonas reinhardtii. According to further analysis of horizontal transfer of green fluorescence protein (GFP)-coding gene after 24 h of incubation in synthetic freshwater, we concluded that the GFP-expressed gene not transferred into predator. However, further risk assessments and construction of standard methods including prolonged toxicity test are required for the accurate ecological risk assessment.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.289-301
• /
• 2018

IIoT, the IoT technology applied to the industrial field, is being used as a monitoring technology for increasing in production rate and safety of workers. However, monitoring through the construction of IIoT network using Ethernet and RS485 in production lines where dozens to hundreds of machine tools are manufacturing components, have difficulties of infrastructure cost and network flexibility and fluidity. Therefore, in this paper, using IEEE 802.15.4 standard WSN device to construct a Ad-Hoc WSN in the production line. In addition, the transmission period and order of the sensor nodes are set by applying the EtherCAT communication method in which the payload frames are shared by all the sensor nodes. From this, we have overcome the problem of reliability decline and real-time issue due to the packet collision of wireless network and confirmed that it is a wireless network routing method that can be used in the actual industrial field.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.595-618
• /
• 2010

This paper describes the application of a wireless sensor network to a 31 meter-tall medieval tower located in the city of Trento, Italy. The effort is motivated by preservation of the integrity of a set of frescoes decorating the room on the second floor, representing one of most important International Gothic artworks in Europe. The specific application demanded development of customized hardware and software. The wireless module selected as the core platform allows reliable wireless communication at low cost with a long service life. Sensors include accelerometers, deformation gauges, and thermometers. A multi-hop data collection protocol was applied in the software to improve the system's flexibility and scalability. The system has been operating since September 2008, and in recent months the data loss ratio was estimated as less than 0.01%. The data acquired so far are in agreement with the prediction resulting a priori from the 3-dimensional FEM. Based on these data a Bayesian updating procedure is employed to real-time estimate the probability of abnormal condition states. This first period of operation demonstrated the stability and reliability of the system, and its ability to recognize any possible occurrence of abnormal conditions that could jeopardize the integrity of the frescos.