• Geomechanics and Engineering
• /
• 제28권6호
• /
• pp.559-571
• /
• 2022

Deep soil mixing, DSM technique has been widely used to improve the engineering properties of problematic soils. Due to growing urbanization and the industrial developments, disposal of brick dust poses a big problem and causes environmental problems. This study aims to use brick dust in DSM application in order to minimize the waste in brick industry and to evaluate its effect on the improvement of the geotechnical properties. Three different percentages of cement content: (10, 15 and 20%) were used in the formation of soil-cement mixture. Unlike the other studies in the literature, various percentages of waste brick dust: (10, 20 and 30%) were used as partial replacement of cement in soil-cement mixture. The results indicated that addition of waste brick dust into soil-cement mixture had positive effect on the inherent strength and stiffness of loose sand. Cement replaced by 20% of brick dust gave the best results and reduced the final setting time of cement and resulted in an increase in unconfined compressive strength, modulus of elasticity and resilient modulus of sand mixed with cement and brick dust. The findings were also supported by the microscopic images of the specimens with different percentages of waste brick dust and it was observed that waste brick dust caused an increase in the interlocking between the particles and resulted in an increase in soil strength. Using waste brick dust as a replacement material seems to be promising for improving the geotechnical properties of loose sand.

• 콘크리트학회지
• /
• 제6권5호
• /
• pp.123-130
• /
• 1994

본 논문은 주변에서 손쉽게 구할수 있는 빈깡통과 플라스틱재등의 폐기물을 토목 및 건축구조물의 시공재료로서의 재활용과 부착성이 뛰어난 발포경질유레탄을 복합하여 중$\cdot$소 span의 교량에 대한 경량화를 꾀하기 위한 하나의 실험적 연구이다. 또한 기존의 현장 시공 단순화를 위해 강 콘크리트 합성 상판의 이미지와는 별도로 새로운 구조적 합리성과 재활용이라는 관점에서 연구된 것이다. 연구결과, 경질우탄 층내에 깡통을 봉입한 경우 저탄성계수인 우레탄이 변형을 흡수하기 때문에 소요의 구조특성을 확보하는 것이 가능하였고, 또한 경질우레탄의 존재로 강판 및 내부의 깡통에 방청효과와 응력전달에 유효하다는 것이 판명되었다.

• 한국생산제조학회지
• /
• 제22권6호
• /
• pp.1025-1031
• /
• 2013

A library of parametric CAD models should be provided for the reuse of design data in configuration design. Mechanical products have many options and parameters, which in turn, require a large number of CAD models for configuration designs. Existing methods for library construction are limited in their ability to decrease the number of CAD models and ensure independency between the configuration design system and the library. To solve these problems, we propose a method that controls a CAD library based on part-shape information model, and also present its technical details. To verify the proposed method, a CAD library for bicycles was constructed and design modification experiments using a prototype part-shape controller were performed. From the experiments, we found that the proposed method can effectively decrease the required number of CAD models by reusing models for configuration designs.

• Advances in concrete construction
• /
• 제13권6호
• /
• pp.433-450
• /
• 2022

The conventional disposal methods of waste tires are harmful to the environment. Moreover, the recycling/reuse of waste tires in domestic and industrial applications is limited due to parent product's quality control and environmental concerns. Additionally, the recycling industry often prefers powdered rubber particles (<0.60 mm). However, the processing of waste tires yields both powdered and coarser (>0.60 mm) size fractions. Reprocessing of coarser rubber requires higher energy increasing the product cost. Therefore, the waste tire rubber (WTR) less favored by the recycling industry is encouraged for use in construction products as one of the environment-friendly disposal methods. In this study, WTR fiber >0.60 mm size fraction is collected from the industry and sorted into 0.60-1.18, 1.18-2.36-, and 2.36-4.75-mm sizes. The effects of different fiber size fractions are studied by incorporating it as fine aggregates at 10%, 20%, and 30% in the self-compacting rubberized concrete (SCRC). The experimental investigations are carried out by performing fresh and hardened state tests. As the fresh state tests, the slump-flow, T500, V-funnel, and L-box are performed. As the hardened state tests, the scanning electron microscope, compressive strength, flexural strength and split tensile strength tests are conducted. Also, the water absorption, porosity, and ultrasonic pulse velocity tests are performed to measure durability. Furthermore, SCRC's energy absorption capacity is evaluated using the falling weight impact test. The statistical significance of content and size fraction of WTR fiber on SCRC is evaluated using the analysis of variance (ANOVA). As the general conclusion, implementation of various size fraction WTR fiber as fine aggregate showed potential for producing concrete for construction applications. Thus, use of WTR fiber in concrete is suggested for safe, and feasible waste tire disposal.

• 한국주거학회논문집
• /
• 제13권5호
• /
• pp.77-88
• /
• 2002

This article deals the investigations how to solve the social deficiencies of deteriorate apartments, which is a half cycle of a building and it goes slum clearance and redevelopment. And this proposes an active remodeling and design strategy, management, and housing policies for extending the usage of the resource. Most of apartment housing in Korea is built by the panel wall and slab structure system fur economic price. To remake is possible, even though not designed in flexibility and variation. The remodeling strategies are dwelling unification, transformation of two units to one or three units, addition of a room, changing into commercial and community required spaces, and reshaping of a envelop and facade by addition of a dwelling or dwellings, roof floors, change of materials and colors, and so on. And, all activities in structural aspect are proposed removal in upper part and addition in lower part of an apartment housing. Active remodeling cost a great deal compare to new construction, so any remodeling activities should be based on a minimal interfere and budgets to enhancing the quality in existing building. The final aim of an active remodeling is to enhance the quality in economic values, and to keep original state and to put on the new one in a small part. To promote the active and careful management and rehabilitation, it is necessary to give the positive incentive in terms of architectural law, bank loan, and any redevelopment project should get the remodeling record in national resources.

• 콘크리트학회논문집
• /
• 제29권2호
• /
• pp.149-157
• /
• 2017

건설 폐기물 양이 증가하면서, 순환재료의 재사용은 건설 분야 중에서도 학문적으로 활발하게 연구되고 있는 분야로 자리 매김하고 있다. 이에 따라 순환재료를 사용한 모르타르 및 콘크리트 품질의 개선과 역학적 특성을 규명하고자 하는 연구는 활발하게 진행되고 있지만, 순환재료를 사용한 섬유보강 시멘트 복합체에 대한 연구는 많지 않다. 본 연구에서는 순환잔골재 및 플라이애시가 PVA 섬유보강 시멘트 복합체의 역학적 특성에 미치는 영향에 대해서 실험적으로 분석하고자 하였다. 순환잔골재 및 플라이애시 치환율은 25% 및 50%로 설정하였으며, 순환재료 치환율에 따른 10개의 PVA 섬유보강 시멘트 복합체의 휨, 압축 및 인장거동을 실험적으로 평가하였다. 실험결과 플라이애시 치환율이 증가함에 따라 휨, 압축, 직접인장강도가 감소하였다. 특히 순환잔골재 및 플라이애시를 각각 50% 치환하는 경우 강도가 가장 낮게 나타났다. 탄성계수는 재령 28일에서의 압축강도와 유사한 경향을 나타냈으며, 푸아송 비는 순환잔골재 및 플라이애시 치환율이 증가함에 따라 크게 나타났다.

• 건축역사연구
• /
• 제23권1호
• /
• pp.7-19
• /
• 2014

This study considers the proper repair techniques by examining the most representative repair cases of the Korean arch bridges and proposes the constructional manual which can apply similar occasions. The cases are Seonamsa Seungseongyo and Songgwangsa Geukrockgyo where this researcher had taken part in the repair works. This Study proposes the maintenance construction manual about the performance degradation drew by performance degradation of the both Korean arch bridges in the maintenance process. First, arch bridge maintenance should be carried out in the dry season, when water is impermeable in the bottom surface of the bridge. Moreover, risk factors of the maintenance should be excluded to secure the water vally flow, the bypass and the temporary bridge. Second, prior to repair, it has to precede (1)3D shooting (2)formal examination (3)structure safety test (4)geological and lithic surveys (5)arch curvature establishment and makeshift frame settlement before transformation (6)relationship expert comments. Third, if the baduk and the foundation stones are inevitable to replace due to performance degradation on the foundation, it should use the high quality stones and secure greater stress by extending the standard range. The foundation on irregular rock needs to be flattened and underside on the replaced materials require Grengyijil to deliver the equal loads. Fourth, In the process of dismantling the stones of the arched bridge, it could make heavy weathering degree and not reuse the materials. Charge should converge the expert advices to choose the reuseable, the conservate and the alternative materials, and increase the reutilization of the raw materials by preservation and reinforcement treatments. Fifth, the side wall should be repaired by the rubble work technique which is not able to pile compost satiety, so it must use long depth of masonary stones for reinforcement. It is considered to reinforce the stone wall in shore as much as possible and protect the abutment and the side wall on the upstream for the arch bridge maintenance works.

• Advances in concrete construction
• /
• 제10권6호
• /
• pp.547-557
• /
• 2020

This paper presents one of the demonstration projects undertaken during the FP7 EU-funded Anagennisi project (Innovative reuse of all tyre components in concrete-2014-2017) on a full-scale (30 m×40 m, thickness: 0.2 m) Steel Fibre Reinforced Concrete (SFRC) slab-on-grade using a blend of manufactured steel fibres (MSF) and Recycled Tyre Steel Fibres (RTSF). The aim of the project was to assess the use of RTSF in everyday construction practice. The Anagennisi partners, Dulex Ltd in collaboration with Gradmont-Gradacac Ltd and University of Zagreb, designed, cast and monitored the long-term shrinkage deformations of the indoor slab-on-grade slab at Gradmont's precast concrete factory in Gradacac, Bosnia and Herzegovina. A hybrid RTSF mix (20 kg/㎥ of MSF+10 kg/㎥ of RTSF) was used to comply with the design criteria which included a maximum load capacity of 20 kN/㎡. The slab was monitored for one year using surveying equipment and visual inspection of cracks. During the monitoring period, the slab exhibited reasonable deformations (a maximum displacement of 3.3 mm for both, horizontal and vertical displacements) whilst after five years in use, the owners did not report any issues and were satisfied with the construction methodology and materials used. This work confirms that RSTF is a viable and sustainable solution for slab-on-grade applications.

• 미생물학회지
• /
• 제51권4호
• /
• pp.374-381
• /
• 2015

국내의 경우 항만과 연안해역 준설로 인하여 연간 수 천만톤 이상 준설토사가 발생하며 매년 증가하고 있으나, 대부분 투기장에 장기간 방치되며, 더구나 2012년부터 런던협약에 의해 해양투기가 금지되고 있어 환경친화적인 준설토처리 및 재활용기술개발이 시급하다. 준설토 재활용기술에서는 중간처리과정후 발생하는 현탁수(유기물과 중금속 함유 $10{\mu}m$ 미만 미세오염퇴적물 포함)의 처리가 필요한데 현재 이 기술은 연구되어 있지 않다. 본 연구에서는 복합유용미생물제제(BM-S-1)을 이용하여 미세해양오염퇴적물($10{\mu}m$ 이하 입자)내 오염되어 있는 유기물질, 영양염류 및 중금속을 정화하여 배출함으로써 오염퇴적물 정화처리수 방류수질 기준을 충족하고자 하였다. BM-S-1 복합미생물제제를 이용한 해양준설토의 친환경정화시스템으로서 일일 50 L 처리용량의 Lab scale 실험장치를 HRT 6.5일, BOD 용적부하 $0.2-0.6kg/m^3{\cdot}day$의 조건으로 생물반응기를 100일 이상 운전하였다. SCOD, T-N 및 T-P의 제거효과는 각각 96.1%, 92.0% 및 79.0%로 나타나 오염미세퇴적토 내의 유기물의 처리효과가 매우 양호하였다. 또한 몇 가지의 중금속(Zn, Ni 및 Cr) 처리에도 효과적이었다. 아울러 물리적으로 분리하기 어려운 $10{\mu}m$ 이하의 미세토양의 고액분리가 가능함을 확인하였다. 미생물군집구조를 분석한 결과 Flavobacteria 및 Gammaproteobacteria 강이 매우 우점하였으며, 이들에 속한 미생물종들은 해양 내의 각종유기물(다당류, 단백질 및 기타 생물중합체)을 처리하는 것으로 알려졌다. 따라서 본 실험에서 사용된 BM-S-1 미생물제제와 처리시스템은 고농도의 염분이 함유되어있는 유기물 및 중금속 오염 해양퇴적물 정화에 효율적으로 적용가능한 것으로 판단되며, 정화, 분리된 미세해양퇴적물은 목적에 맞게 재사용 가능할 것으로 사료된다.

• 수산경영론집
• /
• 제50권4호
• /
• pp.1-9
• /
• 2019

Seaweed by-products have been dumped into the sea and induced marine pollution. However, they can be recycled as a valuable natural resources. Approximately 240,000 tons of sea mustard and kelp by-products were estimated to be producted during the last three years. The estimate corresponds 6.7% of the total production of marine aquaculture and 14.9% of the total production of seaweeds. When adding up the by-products from fish and mollusks, approximately 1,000,000 tons of fisheries by-products were thrown out into the sea every year. A three-step strategy is required for the industralization of fisheries by-products. The first step is the construction of the processing foundation of by-products, the second is its food industralization, and the third is its recycling as raw biomaterials. The stable supply of raw materials is the prerequisite for the industralization. Thus, it is necessary to construct the refuse logistics around chief production districts and to build the processing facility and frozen storage of by-products. Cooperation among private enterprises and government investment for research and development is required the second and third steps.