Browse > Article
http://dx.doi.org/10.12989/acc.2022.13.6.433

Effect of rubber fiber size fraction on static and impact behavior of self-compacting concrete  

Thakare, Akshay A. (Department of Civil Engineering, Indian Institute of Technology Indore)
Siddique, Salman (Department of Civil Engineering, Center for Advanced Construction Materials, University of Texas at Arlington)
Singh, Amardeep (Department of Civil and Architectural Engineering, Changzhou Institute of Technology)
Gupta, Trilok (Department of Civil Engineering, College of Technology and Engineering, Maharana Pratap University of Agriculture & Technology)
Chaudhary, Sandeep (Department of Civil Engineering, Indian Institute of Technology Indore)
Publication Information
Advances in concrete construction / v.13, no.6, 2022 , pp. 433-450 More about this Journal
Abstract
The conventional disposal methods of waste tires are harmful to the environment. Moreover, the recycling/reuse of waste tires in domestic and industrial applications is limited due to parent product's quality control and environmental concerns. Additionally, the recycling industry often prefers powdered rubber particles (<0.60 mm). However, the processing of waste tires yields both powdered and coarser (>0.60 mm) size fractions. Reprocessing of coarser rubber requires higher energy increasing the product cost. Therefore, the waste tire rubber (WTR) less favored by the recycling industry is encouraged for use in construction products as one of the environment-friendly disposal methods. In this study, WTR fiber >0.60 mm size fraction is collected from the industry and sorted into 0.60-1.18, 1.18-2.36-, and 2.36-4.75-mm sizes. The effects of different fiber size fractions are studied by incorporating it as fine aggregates at 10%, 20%, and 30% in the self-compacting rubberized concrete (SCRC). The experimental investigations are carried out by performing fresh and hardened state tests. As the fresh state tests, the slump-flow, T500, V-funnel, and L-box are performed. As the hardened state tests, the scanning electron microscope, compressive strength, flexural strength and split tensile strength tests are conducted. Also, the water absorption, porosity, and ultrasonic pulse velocity tests are performed to measure durability. Furthermore, SCRC's energy absorption capacity is evaluated using the falling weight impact test. The statistical significance of content and size fraction of WTR fiber on SCRC is evaluated using the analysis of variance (ANOVA). As the general conclusion, implementation of various size fraction WTR fiber as fine aggregate showed potential for producing concrete for construction applications. Thus, use of WTR fiber in concrete is suggested for safe, and feasible waste tire disposal.
Keywords
ANOVA; impact energy; microstructure; self-compacting concrete; waste rubber; water permeability;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 Gupta, T., Tiwari, A., Siddique, S., Sharma, R.K. and Chaudhary, S. (2017), "Response assessment under dynamic loading and microstructural investigations of rubberized concrete", J. Mater. Civil Eng., 29(8), 4017062. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001905.   DOI
2 Karakurt, C. (2015), "Microstructure properties of waste tire rubber composites: an overview", J. Mater. Cycl. Waste Manag., 17(3), 422-433. https://doi.org/10.1007/s10163-014-0263-9.   DOI
3 Li, G., Stubblefield, M.A., Garrick, G., Eggers, J., Abadie, C. and Huang, B. (2004b), "Development of waste tire modified concrete", Cement Concrete Res., 34(12), 2283-2289. https://doi.org/10.1016/j.cemconres.2004.04.013.   DOI
4 Liew, K.M. and Akbar, A. (2020), "The recent progress of recycled steel fiber reinforced concrete", Constr. Build. Mater., 232, 117232. https://doi.org/10.1016/j.conbuildmat.2019.117232.   DOI
5 Mohajerani, A., Burnett, L., Smith, J. V., Markovski, S., Rodwell, G., Rahman, M.T., Kurmus, H., Mirzababaei, M., Arulrajah, A., Horpibulsuk, S. and Maghool, F. (2020), "Recycling waste rubber tyres in construction materials and associated environmental considerations: A review", Resour. Conserv. Recycl., 155, 104679. https://doi.org/10.1016/j.resconrec.2020.104679.   DOI
6 Recycling magazine (2020), [https://www.recyclingmagazine.com/2020/10/20/nextlap-seeks-for-innovation-forend-of-life-tire-market/]. URL https://www.recyclingmagazine.com/2020/10/20/nextlap-seeks-for-innovation-forend-of-life-tire-market/ (accessed 4.15.21).
7 Turatsinze, A. and Garros, M. (2008), "On the modulus of elasticity and strain capacity of self-compacting concrete incorporating rubber aggregates", Resour. Conserv. Recycl., 52(10), 1209-1215. https://doi.org/10.1016/j.resconrec.2008.06.012.   DOI
8 Yilmaz, A. and Degirmenci, N. (2009), "Possibility of using waste tire rubber and fly ash with Portland cement as construction materials", Waste Manage., 29(5), 1541-1546. https://doi.org/10.1016/j.wasman.2008.11.002.   DOI
9 Turk, K., Kina, C. and Oztekin, E. (2020), "Effect of macro and micro fiber volume on the flexural performance of hybrid fiber reinforced SCC", Adv. Concrete Constr., 10(3), 257-269. https://doi.org/10.12989/acc.2020.10.3.257.   DOI
10 Williams, K.C. and Partheeban, P. (2018), "An experimental and numerical approach in strength prediction of reclaimed rubber concrete", Adv. Concrete Constr., 6(1), 87-102. https://doi.org/10.12989/acc.2018.6.1.087.   DOI
11 Zaharia, M., Sahajwalla, V., Kim, B.C., Khanna, R., Saha-Chaudhury, N., O'Kane, P., Dicker, J., Skidmore, C. and Knights, D. (2009), "Recycling of rubber tires in electric arc furnace steelmaking: Simultaneous combustion of metallurgical coke and rubber tyres blends", Energy Fuel., 23(5), 2467-2474. https://doi.org/10.1021/ef8010788.   DOI
12 ASTM C 1018 (1997), Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (using Beam with Third-Point Loading), ASTM Stand., 4, 1-8.
13 Angelin, A.F., Lintz, R.C.C., Gachet-Barbosa, L.A. and Osorio, W.R. (2017), "The effects of porosity on mechanical behavior and water absorption of an environmentally friendly cement mortar with recycled rubber", Constr. Build. Mater., 151, 534-545. https://doi.org/10.1016/j.conbuildmat.2017.06.061.   DOI
14 Angelin, A.F., Miranda, E.J.P., Santos, J.M.C.D., Lintz, R.C.C. and Gachet-Barbosa, L.A. (2019), "Rubberized mortar: The influence of aggregate granulometry in mechanical resistances and acoustic behavior", Constr. Build. Mater., 200, 248-254. https://doi.org/10.1016/j.conbuildmat.2018.12.123.   DOI
15 As'ad, S., Gunawan, P. and Alaydrus, M.S. (2011), "Fresh state behavior of self compacting concrete containing waste material fibres", Procedia Eng., 14, 797-804. https://doi.org/10.1016/j.proeng.2011.07.101.   DOI
16 Padhi, S. and Panda, K.C. (2016), "Fresh and hardened properties of rubberized concrete using fine rubber and silpozz", Adv. Concrete Constr., 4(1), 49-69. https://doi.org/10.12989/acc.2016.4.1.049.   DOI
17 ASTM C 642 (2013), Standard Test Method for Density, Absorption, and Voids in Hardened Concrete, ASTM Int., 1-3.
18 Ba Thai, Q., Ee Siang, T., Khac Le, D., Shah, W.A., Phan-Thien, N. and Duong, H.M. (2019), "Advanced fabrication and multi-properties of rubber aerogels from car tire waste", Coll. Surf. A Physicochem. Eng. Asp., 577, 702-708. https://doi.org/10.1016/j.colsurfa.2019.06.029.   DOI
19 BIS 13311 (1992), Non-Destructive Testing of Concrete - Methods of Test, Part 1 - Ultrasonic Pulse Velocity, Bur. Indian Stand. New Delhi, India, 1-7.
20 Gupta, T., Chaudhary, S. and Sharma, R.K. (2014), "Assessment of mechanical and durability properties of concrete containing waste rubber tire as fine aggregate", Constr. Build. Mater., 73, 562-574. https://doi.org/10.1016/j.conbuildmat.2014.09.102.   DOI
21 Medina, N.F., Garcia, R., Hajirasouliha, I., Pilakoutas, K., Guadagnini, M. and Raffoul, S. (2018), "Composites with recycled rubber aggregates: Properties and opportunities in construction", Constr. Build. Mater., 188, 884-897. https://doi.org/10.1016/j.conbuildmat.2018.08.069.   DOI
22 BIS 3812 (2013), Specification for Pulverized Fuel Ash, Part-1: For Use as Pozzolana in Cement, Cement Mortar and Concrete, Bur. Indian Stand. New Delhi, India, 1-12.
23 BIS 5816 (1999), Indian Standard Splitting Tensile Strength of Concrete-Method of Test, Bur. Indian Stand. New Delhi, 5816, 1-14.
24 BIS 8112 (2013), Ordinary Portland Cement, 43 Grade-Specification, Bur. Indian Stand. New Delhi, India, March.
25 Chapman, M.G. and Clynick, B.G. (2006), "Experiments testing the use of waste material in estuaries as habitat for subtidal organisms", J. Exp. Marine Biol. Ecology, 338(2), 164-178. https://doi.org/10.1016/j.jembe.2006.06.018.   DOI
26 Ganjian, E., Khorami, M. and Maghsoudi, A.A. (2009), "Scraptyre-rubber replacement for aggregate and filler in concrete", Constr. Build. Mater., 23(5), 1828-1836. https://doi.org/10.1016/j.conbuildmat.2008.09.020.   DOI
27 Da Silva, F.M., Gachet Barbosa, L.A., Cecche Lintz, R.C. and Jacintho, A.E.P.G.A. (2015), "Investigation on the properties of concrete tactile paving blocks made with recycled tire rubber", Constr. Build. Mater., 91, 71-79. https://doi.org/10.1016/j.conbuildmat.2015.05.027.   DOI
28 EFNARC (2005), The European Guidelines for Self-Compacting Concrete: Specification, Production and Use, 63.
29 Gambhir, M.L. (2013), Concrete Technology, Third Edition, Tata McGraw-Hill.
30 Guneyisi, E., Gesoglu, M., Mermerdas, K. and Ipek, S. (2014), "Experimental investigation on durability performance of rubberized concrete", Adv. Concrete Constr., 2(3), 193-207. https://doi.org/http://dx.doi.org/10.12989/acc.2014.2.3.193.   DOI
31 Guneyisi, E., Gesoglu, M., Naji, N. and Ipek, S. (2016), "Evaluation of the rheological behavior of fresh self-compacting rubberized concrete by using the Herschel-Bulkley and modified Bingham models", Arch. Civil Mech. Eng., 16(1), 9-19. https://doi.org/10.1016/j.acme.2015.09.003.   DOI
32 Ren, R., Liang, J.F., Liu, D., Gao, J. and Chen, L. (2020), "Mechanical behavior of crumb rubber concrete under axial compression", Adv. Concrete Constr., 9(3), 249-256. https://doi.org/10.12989/acc.2020.9.3.249.   DOI
33 Angelin, A.F., Andrade, M.F.F.F., Bonatti, R., Lintz, R.C.C., Gachet-barbosa, L.A. and Osorio, W.R. (2015), "Effects of spheroid and fiber-like waste-tire rubbers on interrelation of strength-to-porosity in rubberized cement and mortars", Constr. Build. Mater., 95, 525-536. https://doi.org/10.1016/j.conbuildmat.2015.07.166.   DOI
34 Luhar, S., Chaudhary, S. and Luhar, I. (2018), "Thermal resistance of fly ash based rubberized geopolymer concrete", J. Build. Eng., 19, 420-428. https://doi.org/10.1016/j.jobe.2018.05.025.   DOI
35 Eldin, N.N. and Senouci, A.B., (1993), "Rubber-tire particles as concrete aggregate", J. Mater. Civil Eng., 5(4), 478-496. https://doi.org/10.1061/(asce)0899-1561(1993)5:4(478).   DOI
36 Li, G., Garrick, G., Eggers, J., Abadie, C., Stubblefield, M.A. and Pang, S.S. (2004a), "Waste tire fiber modified concrete", Compos. Part B Eng., 35(4), 305-312. https://doi.org/10.1016/j.compositesb.2004.01.002.   DOI
37 Mahesh, V., Joladarashi, S. and Kulkarni, S.M. (2021), "Damage mechanics and energy absorption capabilities of natural fiber reinforced elastomeric based bio composite for sacrificial structural applications", Def. Technol., 17(1), 161-176. https://doi.org/10.1016/j.dt.2020.02.013.   DOI
38 Mmereki, D., Machola, B. and Mokokwe, K. (2019), "Status of waste tires and management practice in Botswana", J. Air Waste Manage. Assoc., 69(10), 1230-1246. https://doi.org/10.1080/10962247.2017.1279696.   DOI
39 Ozbay, E., Lachemi, M. and Sevim, U.K. (2011), "Compressive strength, abrasion resistance and energy absorption capacity of rubberized concretes with and without slag", Mater. Struct. Constr., 44(7), 1297-1307. https://doi.org/10.1617/s11527-010-9701-x.   DOI
40 Reda Taha, M.M., El-Deib, A.S., El-wahab, M.A.A. and Abdel-Hameed, M.E. (2008), "Mechanical, fracture, and microstructural investigations of rubber concrete", J. Mater. Civil Eng., 20(10), 640-649. https://doi.org/10.1061/(ASCE)0899-1561(2008)20:10(640).   DOI
41 Thakare, A.A., Singh, A., Gupta, V., Siddique, S. and Chaudhary, S. (2020b), "Sustainable development of self-compacting cementitious mixes using waste originated fibers: A review", Resour. Conserv. Recycl., 168, 105250. https://doi.org/10.1016/j.resconrec.2020.105250.   DOI
42 Thakur, A., Senthil, K., Sharma, R. and Singh, A.P. (2020), "Employment of crumb rubber tyre in concrete masonry bricks", Mater. Today Proc., 32, 553-559. https://doi.org/10.1016/j.matpr.2020.02.106.   DOI
43 WBCSD & The Tire Industry Project (2019), "Global ELT Management-A global state of knowledge on regulation, management systems, impacts of recovery and technologies", WBCSD A Tire Industry Project.
44 BIS 516 (1959), Indian Standard Methods of Tests for Strength of Concrete, Bur. Indian Stand. New Delhi, India, (Reaffirmed 1999).
45 Thakare, A.A., Siddique, S., Sarode, S.N., Deewan, R., Gupta, V., Gupta, S. and Chaudhary, S. (2020a), "A study on rheological properties of rubber fiber dosed self-compacting mortar", Constr. Build. Mater., 262, 120745. https://doi.org/10.1016/j.conbuildmat.2020.120745.   DOI
46 Thomas, B.S. and Gupta, R.C. (2016), "A comprehensive review on the applications of waste tire rubber in cement concrete", Renew. Sustain. Energy Rev., 54, 1323-1333. https://doi.org/10.1016/j.rser.2015.10.092.   DOI
47 Xu, J., Yu, J., Xu, J., Sun, C., He, W., Huang, J. and Li, G. (2020), "High-value utilization of waste tires: A review with focus on modified carbon black from pyrolysis", Sci. Total Environ., 742, 140235. https://doi.org/10.1016/j.scitotenv.2020.140235.   DOI
48 Akono, A.T., Chen, J. and Kaewunruen, S. (2018), "Friction and fracture characteristics of engineered crumb-rubber concrete at microscopic lengthscale", Constr. Build. Mater., 175, 735-745. https://doi.org/10.1016/j.conbuildmat.2018.04.141.   DOI
49 Alberti, M.G., Enfedaque, A. and Galvez, J.C. (2015), "Comparison between polyolefin fibre reinforced vibrated conventional concrete and self-compacting concrete", Constr. Build. Mater., 85, 182-194. https://doi.org/10.1016/j.conbuildmat.2015.03.007.   DOI
50 Wang, Y., Li, J., Fu, Y., Bao, R., Chen, W. and Wang, Y.S. (2021), "Tunable guided waves in a soft phononic crystal with a line defect", APL Mater., 9(5), 051124. https://doi.org/10.1063/5.0049574.   DOI
51 Karger-Kocsis, J., Meszaros, L. and Barany, T. (2013), "Ground tyre rubber (GTR) in thermoplastics, thermosets, and rubbers", J. Mater. Sci., 48(1), 1-38. https://doi.org/10.1007/s10853-012-6564-2.   DOI
52 Gupta, T., Sharma, R.K. and Chaudhary, S. (2015), "Impact resistance of concrete containing waste rubber fiber and silica fume", Int. J. Impact Eng., 83, 76-87. https://doi.org/10.1016/j.ijimpeng.2015.05.002.   DOI
53 Hesami, S., Salehi Hikouei, I. and Emadi, S.A.A. (2016), "Mechanical behavior of self-compacting concrete pavements incorporating recycled tire rubber crumb and reinforced with polypropylene fiber", J. Clean. Prod., 133, 228-234. https://doi.org/10.1016/j.jclepro.2016.04.079.   DOI
54 Hilal, N.N. (2017), "Hardened properties of self-compacting concrete with different crumb rubber size and content", Int. J. Sustain. Built Environ., 6(1), 191-206. https://doi.org/10.1016/j.ijsbe.2017.03.001.   DOI
55 Li, J. and Rudykh, S. (2019), "Tunable microstructure transformations and auxetic behavior in 3D-printed multiphase composites: The role of inclusion distribution", Compos. Part B Eng.. 172, 352-362. https://doi.org/10.1016/j.compositesb.2019.05.012.   DOI
56 ASTM C 231 (2010), Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method, ASTM Int., 1-10.
57 Aliabdo, A.A., Abd Elmoaty, A.E.M. and Abdelbaset, M.M. (2015), "Utilization of waste rubber in non-structural applications", Constr. Build. Mater., 91, 195-207. https://doi.org/10.1016/j.conbuildmat.2015.05.080.   DOI
58 Angelin, A.F., Cecche Lintz, R.C., Osorio, W.R. and Gachet, L.A. (2020), "Evaluation of efficiency factor of a self-compacting lightweight concrete with rubber and expanded clay contents", Constr. Build. Mater., 257, 119573. https://doi.org/10.1016/j.conbuildmat.2020.119573.   DOI
59 Araujo-Morera, J., Verdejo, R., Lopez-Manchado, M.A. and Hernandez Santana, M. (2021), "Sustainable mobility: The route of tires through the circular economy model", Waste Manag., 126, 309-322. https://doi.org/10.1016/j.wasman.2021.03.025.   DOI
60 Bideci, A., Ozturk, H., Bideci, O.S. and Emiroglu, M. (2017), "Fracture energy and mechanical characteristics of self-compacting concretes including waste bladder tyre", Constr. Build. Mater., 149, 669-678. https://doi.org/10.1016/j.conbuildmat.2017.05.191.   DOI
61 Callinan, G. and Cashman, G. (2005), Retaining Wall System, Patent, Publication No. US 2005/0042039 A1.
62 Deeb, R. (2013), "Flow of self-compacting concrete", School of Engineering Cardiff University, UK.
63 Marie, I. (2016), "Zones of weakness of rubberized concrete behavior using the UPV", J. Clean. Prod., 116, 217-222. https://doi.org/10.1016/j.jclepro.2015.12.096.   DOI
64 Li, N., Long, G., Ma, C., Fu, Q., Zeng, X., Ma, K., Xie, Y. and Luo, B. (2019), "Properties of self-compacting concrete (SCC) with recycled tire rubber aggregate: A comprehensive study", J. Clean. Prod., 236, 117707. https://doi.org/10.1016/j.jclepro.2019.117707.   DOI
65 Fediuk, R., Mosaberpanah, M.A. and Lesovik, V. (2020), "Development of fiber reinforced self-compacting concrete (FRSCC): Towards an efficient utilization of quaternary composite binders and fibers", Adv. Concrete Constr., 9(4), 387-395. https://doi.org/10.12989/acc.2020.9.4.387.   DOI
66 Gupta, T., Chaudhary, S. and Sharma, R.K. (2016), "Mechanical and durability properties of waste rubber fiber concrete with and without silica fume", J. Clean. Prod., 112, 702-711. https://doi.org/10.1016/j.jclepro.2015.07.081.   DOI
67 Gesoglu, M., Guneyisi, E., Khoshnaw, G. and Ipek, S. (2014), "Abrasion and freezing-thawing resistance of pervious concretes containing waste rubbers", Constr. Build. Mater., 73, 19-24. https://doi.org/10.1016/j.conbuildmat.2014.09.047.   DOI