• 제목/요약/키워드: Constituent analysis

검색결과 530건 처리시간 0.03초

API X80 라인파이프강의 미세조직과 기계적 특성에 미치는 냉각조건의 영향 (Effect of Cooling Conditions on Microstructures and Mechanical Properties in API X80 Linepipe Steels)

  • 한승엽;신상용;이성학;배진호;김기수
    • 대한금속재료학회지
    • /
    • 제47권9호
    • /
    • pp.523-532
    • /
    • 2009
  • In this study, four API X80 linepipe steel specimens were fabricated with varying cooling rates and finish cooling temperatures, and their microstructures and crystallographic orientations were analyzed to investigate the effects of cooling conditions on their tensile and Charpy impact properties. All the specimens consisted of acicular ferrite, granular bainite, and secondary phases such as martensite and martensiteaustenite constituent. The volume fraction of secondary phases increased with increasing cooling rate, and the higher finish cooling temperature resulted in the reduction in volume fraction and grain size of secondary phases. According to the crystallographic orientation analysis data, the effective grain size and unit crack path decreased as fine acicular ferrites having a large amount of high-angle grain boundaries were homogeneously formed, thereby leading to the improvement of Charpy impact properties. The specimen fabricated with the higher cooling rate and lower finish cooling temperature had the highest upper shelf energy and the lowest energy transition temperature because it contained a large amount of fine secondary phases homogeneously distributed inside fine acicular ferrites, while its tensile properties well maintained.

기계식 추진 시스템 제어를 위한 가스터빈 엔진 모델링 및 시뮬레이션 (Modeling and Simulation of a Gas Turbine Engine for Control of Mechanical Propulsion Systems)

  • 백경미;허환일;기자영
    • 한국추진공학회지
    • /
    • 제25권4호
    • /
    • pp.43-52
    • /
    • 2021
  • 본 연구에서는 기계식 추진 시스템인 CODOG 구조의 통합 제어를 위하여 구성 모듈인 가스터빈 엔진의 성능 모델링 및 시뮬레이션을 수행하였다. 엔진 모델은 상위 제어기 및 타 구성 모듈과의 통합이 용이하도록 MATLAB/Simulink를 이용하였으며, 시스템의 구성 및 목적에 맞는 입/출력 설정이 가능하도록 구성하였다. 일반적으로 엔진 제작사는 엔진 및 구성요소의 성능 데이터를 제공하지 않는다. 따라서 가스터빈 엔진에 대한 모델링 기법으로 구성요소의 맵을 스케일링하여 성능 데이터를 확보하는 CMF 기법을 적용하였다. 생성한 모델 및 시뮬레이션 프로그램을 이용하여 정상상태 및 동적 해석 시험을 수행하였으며, 최종 출력 결과에 대해 최대 오차 5% 이내의 신뢰성을 확보하였다.

황사와 몽골 남부 기반암의 광물학적 비교 (Mineralogical Comparison between Asian Dust and Bedrock in Southern Mongolia)

  • 정기영
    • 광물과 암석
    • /
    • 제35권4호
    • /
    • pp.397-407
    • /
    • 2022
  • 황사 구성 광물의 지질학적 근원을 추적하기 위해, 발원지인 몽골 남부 고비사막 기반암의 광물학적 특성을 분석하였다. 황사 발원지 기반암은 고생대 화산암 및 화산쇄설성 퇴적암, 고생대 화강암류, 중생대 퇴적암으로 구성되어 있다. 고생대 화산암 및 퇴적암은 매우 치밀하게 고화 및 변형되어 산지를 형성하며, 중생대 백악기 퇴적암은 고생대 화산암 및 퇴적암으로 이루어진 산맥 사이의 분지를 충전한다. 고생대층 암석은 녹니석과 사장석 함량이 높고, 녹색편암상의 변성작용을 받았다. 중생대 퇴적암층은 녹니석이 드물고, 스멕타이트, 일라이트-스멕타이트 혼합층, 카올리나이트 등의 점토광물이 풍부하다. 고생대 화강암류에는 각섬석과 흑운모가 특징적으로 함유되어 있다. 발원지 기반암의 광물학적 특성과 비교하면, 황사는 고생대층과 중생대층 기원 쇄설물의 혼합물이나, 중생대 퇴적암에 더 가깝다. 점토 함량이 높고, 덜 고화된 중생대 퇴적암류는 잘 부스러져 침식되기 쉬운 실트질 표토가 되어 황사 광물 구성에 기여한다.

Sustainable controlled low-strength material: Plastic properties and strength optimization

  • Mohd Azrizal, Fauzi;Mohd Fadzil, Arshad;Noorsuhada Md, Nor;Ezliana, Ghazali
    • Computers and Concrete
    • /
    • 제30권6호
    • /
    • pp.393-407
    • /
    • 2022
  • Due to the enormous cement content, pozzolanic materials, and the use of different aggregates, sustainable controlled low-strength material (CLSM) has a higher material cost than conventional concrete and sustainable construction issues. However, by selecting appropriate materials and formulations, as well as cement and aggregate content, whitethorn costs can be reduced while having a positive environmental impact. This research explores the desire to optimize plastic properties and 28-day unconfined compressive strength (UCS) of CLSM containing powder content from unprocessed-fly ash (u-FA) and recycled fine aggregate (RFA). The mixtures' input parameters consist of water-to-cementitious material ratio (W/CM), fly ash-to-cementitious materials (FA/CM), and paste volume percentage (PV%), while flowability, bleeding, segregation index, and 28-day UCS were the desired responses. The central composite design (CCD) notion was used to produce twenty CLSM mixes and was experimentally validated using MATLAB by an Artificial Neural Network (ANN). Variance analysis (ANOVA) was used for the determination of statistical models. Results revealed that the plastic properties of CLSM improve with the FA/CM rise when the strength declines for 28 days-with an increase in FA/CM, the diameter of the flowability and bleeding decreased. Meanwhile, the u-FA's rise strengthens the CLSM's segregation resistance and raises its strength over 28 days. Using calcareous powder as a substitute for cement has a detrimental effect on bleeding, and 28-day UCS increases segregation resistance. The response surface method (RSM) can establish high correlations between responses and the constituent materials of sustainable CLSM, and the optimal values of variables can be measured to achieve the desired response properties.

스마트시티 프로젝트 이해관계자 간의 목표 우선순위에 대한 연구: AHP 방법론의 적용을 중심으로 (A Study on Priority Goals of Stakeholders for Smart City Projects: An Application of AHP Methodology)

  • 이태원;김승철;이아연;박소현
    • 산업경영시스템학회지
    • /
    • 제45권3호
    • /
    • pp.173-185
    • /
    • 2022
  • For the smooth implementation and success of smart city projects, it is necessary to recognize that there is a difference in the perception of value judgments or strategic goals among major stakeholders in the planning process. And it is necessary to aim the values and goals of smart cities through reconciliation of these differences. The two major stakeholders in the smart city development project are citizens group and government officials group. Government officials are in charge of establishing and implementing policies for smart city projects, and their value judgments and perceptions influence the policy direction. In these respects, government officials can be an important stakeholder group. Citizens are a group that includes ordinary residents and business owners who live in smart cities and are the ultimate users of infrastructure and facilities. This study investigated the importance perceptions of citizens and government officials, who are the major stakeholders, about the core values and strategic goals that the smart city project aims. Responses were collected using a structured questionnaire to which the AHP methodology was applied. And the priority of perceptions for constituent items was compared for each stakeholder group. Through the comparative analysis results, it was empirically confirmed that there is a difference in the values and goals pursued by the smart city project between stakeholder groups. As an empirical study on the stakeholders of the smart city project, this study is meaningful in contributing to the theoretical development in that it suggests that the conceptual structural model of the smart city strategy system presented in previous studies can be applied in practice.

Chemical properties and antioxidant activity of essential oils of Chrysanthemum morifolium Ramat. and Chrysanthemum indicum L. in Vietnam

  • Thi-Hoan Luong;Dang-Minh-Chanh Nguyen;Thi-Nga Trinh;Viet-Cuong Han;Woo-Jin Jung
    • Journal of Applied Biological Chemistry
    • /
    • 제65권4호
    • /
    • pp.367-374
    • /
    • 2022
  • In recent years, research into medicinal herbs with antioxidative activities has increased. Chrysanthemum morifolium and Chrysanthemum indicum are aromatic herb plants and that have long been used in traditional Vietnamese medicine. This study aims to evaluate the chemical compositions and antioxidative activities of essential oils hydrodistilled from the flower heads of C. morifolium and C. indicum. The chemical compositions of the essential oils were compared using gas chromatography/mass spectrometry (GC/MS) analysis. The antioxidative activity was determined and evaluated spectroscopically by the 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging, metal chelating activity, reducing power, and total antioxidant capacity assays. According to the GC/MS results, chrysanthenone was predominant in the essential oils of both C. morifolium (64.14%) and C. indicum (32.02%). This is the first report of the identification of chrysanthenone as a major constituent of the essential oil of C. morifolium. Both Chrysanthemum oils were also revealed to possess antioxidant potential, exhibiting high antioxidative activities. In particular, the DPPH radical scavenging activities of the C. morifolium and C. indicum oils at a concentration of 100 mg/mL were 76.9 and 83.2%, respectively. The metal chelating values of C. morifolium and C. indicum were 0.85 and 0.76, whereas the reducing power values of that at 100 mg/mL were 0.76 and 0.71, respectively. This study provides the chemical properties of the essential oils of both C. morifolium and C. indicum grown in Vietnam and their potential antioxidant capacity.

건설 기업의 재무 상태와 경영 성과 전망 (Financial Status and Business Performance Outlook of Construction Companies)

  • 김병일
    • 대한토목학회논문집
    • /
    • 제43권5호
    • /
    • pp.659-666
    • /
    • 2023
  • 건설업은 경기에 민감하게 반응하며 완전 경쟁에 가까운 산업 구조를 갖기 때문에 재무 상태가 취약한 기업은 불황기에 손쉽게 도태될 수 있다. 건설 기업의 지속적 생존과 성장을 도모하기 위해서는 재무 상태와 경영 성과를 반복적으로 측정할 필요성이 있다. 이에 본 연구는 2000년부터 2019년까지 최소한 한 번 이상 외부감사를 받은 건설 기업 6,252개의 재무제표를 사용하여 합산 재무제표를 생성하였고, 이 재무제표를 기준으로 건설 기업의 평균적인 재무 상태와 경영 현황을 파악하였다. 이 과정을 통하여 건설업은 매출액 성장과 이익률 개선에 한계가 있으며 높은 레버리지비율은 재무적 안정성을 해할 수 있으므로 총자산회전율 개선과 같은 생산효율을 추구하는 경향을 발견하였다. 이 경향은 2008년 세계금융위기 이후에 더 선명하게 나타났다.

Comparison of the metabolic profile of the mycelia and fruiting bodies of artificially cultured Cordyceps militaris

  • Ha, Si Young;Jung, Ji Young;Park, Han Min;Yang, Jae-Kyung
    • 한국버섯학회지
    • /
    • 제20권1호
    • /
    • pp.13-21
    • /
    • 2022
  • Cordyceps militaris, a well-known traditional Chinese medicine, has multiple health-promoting effects. It is used as a herbal remedy and health food in Asian countries. Cultured mycelia are often used as a substitute for natural C. militaris. In the present study, the mycelia and fruiting bodies of artificially cultured C. militaris were analyzed using a metabolomics approach. The protein and crude fat contents of the mycelia were substantially higher than those of the fruiting bodies. The top three abundant amino acids in the mycelia were proline (3.9 g/100 g), aspartic acid (2.9 g/100 g), and glutamic acid (2.7 g/100 g). The carbohydrate content was similar in the fruiting bodies and mycelia. Analysis revealed that both the fruiting bodies and mycelia are rich in phenolic compounds and exhibit antioxidant activity. Further, six metabolites were significantly different between the mycelia and fruiting bodies. The levels of Ca, glucose, Mg, and Se were higher in the mycelia than in the fruiting bodies. In contrast, mannitol and Zn were more abundant in the fruiting bodies. The current study provides a comprehensive metabolic profile of the mycelia and fruiting bodies of artificially cultured C. militaris. Such an exercise is potentially important for understanding the metabolism of C. militaris and facilitating the use of cultured mycelia as a supplement to C. militaris fruiting bodies in traditional Chinese medicine.

ANP 기법 활용 농업용수 거버넌스 구성요인 우선순위 분석 (Priority Analysis for Agricultural Water Governance Components by Using Analytic Network Process(ANP))

  • 이슬기;최경숙
    • 농촌계획
    • /
    • 제29권4호
    • /
    • pp.27-34
    • /
    • 2023
  • Recently, worldwide to respond to climate change and secure sustainability. Korea aimed to increase water use efficiency by implementing integrated management according to the water management unification policy. Therefore, the necessity of establishing and operating governance is expanding to ensure the sustainability of agricultural water. In this study aims to evaluate the importance of agricultural water governance components and provide essential data for the participation of stakeholders in the efficient use of agricultural water in Korea. For this study, a total of 19 respondents to the ANP survey for this study were composed of experts in agricultural water and governance in Korea. As a result, the ranking for the main components was in the order of law, policy, and systems(0.222), core subjects(0.191), information sharing and communication(0.180), budget support(0.178), mutual learning(0.124), and external experts(0.105). The most important components for the operation of agricultural water governance are laws, policies, and systems. Since Korea's agricultural water management is a public management system, national standards are considered the first priority. This study, which is the purpose of the agricultural water governance model, evaluated the importance of the constituent components for participating in demand management with a sense of responsibility. Moreover, if agricultural water governance is expanded nationwide by reflecting agricultural and water resource policies in the future, it is believed that positive effects can be achieved in increasing utilization efficiency and securing sustainability through agricultural water saving.

인이 도핑된 NiCo2O4 전극 제조 공정의 간소화를 통한 전극 특성의 변화 (Variations in electrode characteristics through simplification of phosphorus-doped NiCo2O4 electrode manufacturing process)

  • 이석희;차현진;박정환;손영국;황동현
    • 한국표면공학회지
    • /
    • 제56권5호
    • /
    • pp.299-308
    • /
    • 2023
  • In this study, phosphorus (P)-doped nickel cobaltite (P-NiCo2O4) and nickel-cobalt layered double hydroxide (P-NiCo-LDH) were synthesized on nickel (Ni) foam as a conductive support using hydrothermal synthesis. The thermal properties, crystal structure, microscopic surface morphology, chemical distribution, electronic state of the constituent elements on the sample surface, and electrical properties of the synthesized P-NiCo2O4 and P-NiCo-LDH samples were analyzed using thermogravimetric analysis-differential scanning calorimetry (TGA-DSC), X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), and electrochemical impedance spectroscopy (EIS). The P-NiCo2O4 electrode exhibited a specific capacitance of 1,129 Fg-1 at a current density of 1 Ag-1, while the P-NiCo-LDH electrode displayed a specific capacitance of 1,012 Fg-1 at a current density of 1 Ag-1. When assessing capacity changes for 3,000 cycles, the P-NiCo2O4 electrode exhibited a capacity retention rate of 54%, whereas the P-NiCo-LDH electrode showed a capacity retention rate of 57%.