• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.207-210
• /
• 2002

Metal matrix composites(MMCs) are increasingly attractive for high technology components such as aerospace applications and transportations due to their high strength, stiffness, and toughness. Many processes for fabricating MMCs have been developed, and relatively simple Foil-Fiber-Foil method is usually employed in solid state consolidation processes. During the consolidation processes at high temperature, densification occurs by the inelastic flow of the matrix materials, and the process is coupled with the conditions of pressure, temperature and volume fraction of fiber and matrix materials. This is particularly important in titanium matrix composites, and thus a generic model based on micro-mechanical approaches enabling the evolution of density over time to be predicted has been developed. The mode developed is then implemented into FEM so that practical process simulation has been carried out. Further the experimental investigation of the consolidation behavior of SiC/Ti-6Al-4V composites using vacuum hot pressing has been performed, and the results obtained are compared with the model predictions.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.467-474
• /
• 2000

The application of Terzaghi's theory of consolidation for analysing the settlement of multi-layered soils is not strictly valid because the theory involves an assumption that the soil is homogeneous. The settlement of stratified soils with confined aquifer can be analysed using numerical techniques whereby the governing differential equation is replaced by 2-dimensional finite difference approximations. The problems of discontinuous layer interface are very important in the algorithm and programming for the analysis of multi-layered consolidation using a numerical analysis, finite difference method(F.D.M.). Better results can be obtained by the process for discontinuous layer interface, since it can help consolidation analysis to model the actual ground The purpose of this paper provides an efficient computer algorithm based on numerical analysis using finite difference method(F.D.M) which account for multi-layered soils with confined aquifer to determine the degree of consolidation and excess pore pressures relative to time and positions more realistically.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.990-997
• /
• 2005

In this paper, the measured results obtained from the ground improved by SCP method at quay-wall caisson foundation in Pusan New Port 1-1 phase are analyzed and then compared with the values predicted by a consolidation theory. The measured settlement is generally smaller than the predicted settlement. For consolidation velocity, the measured velocity is later than the predicted value. According to the execution of caisson placing phases, the predicted value shows higher settlement than the measured one with time being.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2853-2865
• /
• 2000

During the curing process of thick glass/epoxy laminates, a substantial amount of temperature lag and overshoot at the center of the laminates is usually experienced due to the large thickness and low thermal conductivity of the glass/epoxy composites. Also, it takes a longer time for full and uniform consolidation. In this work, temperature, degree of cure and consolidation of a 20 mm thick unidirectional glass/epoxy laminate were investigated using an experiment and a 3-dimentional numerical analysis. From the experimental and numerical results, it was found that the experimentally obtained temperature profile agreed well with the numerical one, and the cure cycle recommended by the prepreg manufacturer should be modified to prevent a temperature overshoot and to obtain full consolidation.

• 산업기술연구
• /
• 제21권A호
• /
• pp.317-327
• /
• 2001

For soils with high void ratios, the inverse method of utilizing results obtained from centrifuge model test was used to find the constitutive relation of effective stress - void ratio - permeability whereas conventional oedometer test and constant rate of strain consolidation test were also used to fine its relation at ranges of relatively low void ratio. Results of column test about settlement of interface and pore pressure and distribution with time were compared with numerically estimated values to confirm such a constitutive relation as obtained from the inverse method. Consolidational settlement in dredged and reclaimed ground, where the consolidation was in progress, was predicted by using the numerical technique implemented with the finite strain consolidation theory.

• 한국지반공학회논문집
• /
• 제16권2호
• /
• pp.71-77
• /
• 2000

In this paper, consolidation settlements with time at vertical drain sites were predicted by artificial neural networks. Laboratory test results and field measurements of two vertical drain sites were used for training and testing neural networks. Predicted consolidation settlements by trained artificial neural networks were compared with measured settlements by field instrumentation. To improve the prediction accuracy, modular artificial neural networks were studied. From the results of applying artificial neural networks to the same situation, it was shown that modular artificial neural network model was more accurate for the prediction of the consolidation settlements than the general model.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.91-96
• /
• 2000

Glass fiber reinforced thermoplastic composites were manufactured by Rapid Press Consolidation Technique(RPCT) as functions of temperature, pressure and time in pre-heating, consolidation and solidification sections during the manufacturing processing. It was found that the material property is greatly affected by pre-heating temperature under vacuum, mold temperature and molding pressure. Among them, the temperature In the mold was the most critical factor in determining the mechanical properties and the molded conditions of specimen. The crystallinity of PET matrix was also investigated by differential scanning calorimetry(DSC) measurements for various processing conditions. The level of crystallinity($X_c$) depended strongly on the mold temperature, cooling rate and the type of composite. The difference in $X_c$ is believed to be one of important factors in characterizing the mechanical properties.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 2차
• /
• pp.141-146
• /
• 2010

To investigate the effect of drainage spacing and smear on the rate of consolidation, a large consolidation chamber and mandrel insertion device were developed. After the occurrence of smear by installation of sand drain, model ground was consolidated in either overconsolidated or normally consolidated state. As smear effect increases and thus drain spacing decreases, total settlement increase in overconsolidated state but has no effect in normally consolidated state. Efficiency of vertical drain decreases and consequently consolidation time increases in all tests as smear effect becomes significant.

• 한국지반공학회논문집
• /
• 제27권10호
• /
• pp.45-54
• /
• 2011

본 연구에서는 세립토인 카올리나이트와 매립석탄회를 혼합하여 일반적인 준설토와 매립석탄회를 혼합한 매립지반의 압밀특성을 살펴보았다. 인공 혼합토를 성형하기 위하여 퇴적 토조를 제작하여 카올리나이트 슬러리에 석탄회를 30% 혼합하여 동일한 응력이력을 가지는 시료를 성형하였다. 매립지반의 연직방향과 횡방향의 압밀 및 압축 특성을 알아보기 위하여 표준압밀시험과 Rowe Cell 압밀시험을 수행하였다. 표준압밀시험 시험 결과, 점토 시료에 비하여 매립석탄회를 같이 혼합하는 것이 낮은 압축성과 높은 압밀계수틀 갖게 되어 매립지반의 조기 안정화에 도움을 줄 수 있을 것으로 판단된다. 또한 연직배수재 설치시 횡방향 압밀 특성을 파악하기 위하여, Rowe cell 시휘에서 연직배수재를 설치하여 암밀시험을 수행하였다. Rowe cell 시험결과, 혼합토의 횡방향 압밀계수 또한 순수 카올리나이트 시료에 비하여 높은 값을 나타내어 매립회의 혼합이 압밀시간을 단축시킬 수 있는 것으로 나타났다.

• 한국지반신소재학회논문집
• /
• 제11권2호
• /
• pp.49-54
• /
• 2012

연약지반 개량공사에서 최종압밀침하량은 침하관리와 준공시기를 결정하는 데 중요하다. 설계 시 점토층의 최종압밀침하량의 산정은 압축지수를 이용하는 방법이 가장 많이 이용되고 있다. 압축지수는 압밀시험으로 얻어진 하중-침하 관계를 반대수좌표에 나타냈을 때 처녀압축곡선의 기울기이다. 종래에는 압밀층 전체를 한 개의 층으로 보고 최종압밀침하량을 산정해 왔으나, 압밀층을 여러 개의 층으로 분할했을 때 얻어지는 침하량의 차이를 알아보았다. 분할층 수와 상재하중의 크기가 압밀침하량에 미치는 영향에 대하여 분석한 결과는 다음과 같다. 분할층 수가 증가할수록 침하량은 증가하여 일정한 값에 수렴하며 이러한 양상은 상재하중의 크기와 무관하게 나타났다. 상재하중이 압밀층 두께에 비해 상대적으로 작을 때는 층분할효과가 매우 크게 나타났다. 보편적인 성토하중의 경우 층분할효과는 1.2-1.4 정도로 나타났으며 이 값은 최종압밀침하량 산정 시 안전율의 의미로 사용할 수 있을 것이다.