• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.247-248
• /
• 2015

Wind turbines causes instabilities on the grid as their penetration increase. To mitigate harmful effects from wind turbines, transmission system operator(TSO) set up some requirements to obligate for wind generation operator for grid connection. So wind farm management system(WFMS) has important role to follow requirement from TSO, WFMS calculates available real power by considering wake effects, and dispatches real power order to each wind turbine in wind farm to optimize for decreasing load fatigue. To verify operation of WFMS, real-time simulator(RTS) is necessary. This paper deals with RTS configuration to verify WFMS operation. RTS includes wind farm model and power flow code. Normally, wind farm equivalent simple model makes wind turbines in wind farm to one wind turbine mode which cannot verify power flow in wind farm and WFMS operation. Thus, this paper makes wind farm model using simple wind turbine model with transfer function. Matlab is used for make power flow code and wind farm model to impose RTS and those model is certified by PSCAD/EMTDC.

• Journal of Power Electronics
• /
• v.16 no.6
• /
• pp.2272-2283
• /
• 2016

This paper proposes a power conditioning system (PCS) for distributed photovoltaic (PV) applications using an asymmetric cascaded multilevel inverter with a single PV source. One of the main disadvantages of the cascaded multilevel inverters in PV systems is the requirement of multiple isolated DC sources. Using multiple PV strings leads to a compromise in either the voltage balance of individual H-bridge cells or the maximum power point tracking (MPPT) operation due to localized variations in atmospheric conditions. The proposed PCS uses a single PV source with a flyback DC-DC converter to facilitate a reduction of the required DC sources and to maintain the voltage balance during MPPT operation. The flyback converter is used to provide input for low-voltage H-bridge cells which processes only 20% of the total power. This helps to minimize the losses occurring in the proposed PCS. Furthermore, transient analyses and controller design for the proposed PCS in both the stand-alone mode and the grid-connection mode are presented. The feasibility of the proposed PCS and its control scheme have been tested using a 1kW hardware prototype and the obtained results are presented.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.28 no.2
• /
• pp.75-89
• /
• 2003

Media Access Control (MAC) Protocol in IEEE 802.11 Wireless LAN standard supports two types of services, synchronous and asynchronous. Synchronous real-time traffic is served by Point Coordination Function (PCF) that implements polling access method. Asynchronous nonreal-time traffic is provided by Distributed Coordination Function (DCF) based on Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA) protocol. Since real-time traffic is sensitive to delay, and nonreal-time traffic to error and throughput, proper traffic scheduling algorithm needs to be designed. But it is known that the standard IEEE 802.11 scheme is insufficient to serve real-time traffic. In this paper, real-time traffic scheduling and admission control algorithm is proposed. To satisfy the deadline violation probability of the real time traffic the downlink traffic is scheduled before the uplink by Earliest Due Date (EDD) rule. Admission of real-time connection is controlled to satisfy the minimum throughput of nonreal-time traffic which is estimated by exponential smoothing. Simulation is performed to have proper system capacity that satisfies the Quality of Service (QoS) requirement. Tradeoff between real-time and nonreal-time stations is demonstrated. The admission control and the EDD with downlink-first scheduling are illustrated to be effective for the real-time traffic in the wireless LAN.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.4
• /
• pp.9-16
• /
• 2011

Modern systems become more complex and the demand for systems safety goes up sharply. Thus, the proper handling of the safety requirements in the systems design is getting greatly increased attention these days. Hazard analysis has been one of the active areas of research in connection with systems safety. In this paper, we study a subject on how the hazard analysis results can be incorporated in the systems design. To this end we set up a goal on how to systematically generate safety requirements that should reflect hazard analysis results and be implemented in the systems design and development. To do so, we first review the process for systems design and suggest the associated Model. Then the process and results of hazard analysis are analyzed and Modeled particularly with emphasis on the safety data. The resulting data Model incorporating both the hazard analysis and system life cycle is used in the generation of safety requirements. Based on the developed data Model, the generation of the requirements, the construction of requirements DB, and the change management later on is demonstrated through the use of a computer-aided software tool.

• Korean Institute of Interior Design Journal
• /
• v.17 no.2
• /
• pp.150-161
• /
• 2008

It requires more close cooperation process and mediator for smooth communication in this industry structure where design and engineers are separated. The database of design integrates separate system and helps connection between organizations. The application category is utilized variously from formation to operation. Architectures addressed in this content as Frank Gehry and Nox are making differentiated design on the base of 3d digital methodology and using it widely from generation to fabrication. Especially they got to be free from the generative limit as it became available to analyse, digital surface organization, and realize the complex system form. Now more integrated and delicate works got to be affordable owing to various kinds of improved CNC, RP(rapid-prototype) machines, and architecture hardwares. With a linkage of software now at their disposal, architects can create a digital model of a building and all of its design elements, and in turn use this 3d information to construct actual building components using machines driven by CNC and other advanced manufacturing techniques. Digital technologies are enabling a direct correlation between what design and construction, thus bringing to the forefront the issue of the significance of information, the production, communication, application, and control of digital information in the industrial system. The central requirement is the clear, reliable, and consistent exchange of information among all parties involved in creating a given project.

• Korean Institute of Interior Design Journal
• /
• v.23 no.4
• /
• pp.140-148
• /
• 2014

The objective of this study is to address Effective Learning Methodology by subjects to acquire National Certification which is an essential requirement to get employed. For this purpose, analysis was completed after conducting a survey on the class to obtain Interior Architecture Engineer Certification. 23 applicants were selected based on effectiveness of each subject, level of difficulty, degree of understanding, mentoring effect, self-driven learning, and group discussion. Results are as below. Upon the first written test, Interior Design Theory and Chromatics showed a high learning effectiveness in self-driven learning and mentoring. Ergonomics showed a high learning effectiveness in mentoring, self-driven learning and group discussion while Building Materials, Architecture Construction presented a high effectiveness only in mentoring and group discussion. Architecture Environment showed average learning effectiveness in mentoring and group discussion and showed a low effectiveness in self-driven learning. Upon the second practice test, Interior Architecture Construction and Planning/Management of Construction Materials presented an average learning effectiveness in mentoring and group discussion. Process Control and Adding Up(Supply Calculation) showed a low learning effectiveness in self-driven learning and presented an average to below average learning effectiveness in mentoring and group discussion. Lastly, Interior Design Plan, Interior Design Drawings presented average learning effectiveness in mentoring and group discussion however they showed a high effectiveness in self-driven learning.

• Journal of Digital Contents Society
• /
• v.15 no.1
• /
• pp.77-85
• /
• 2014

The Service Oriented Architecture has been adopted to be able to handle various types of user requirement flexibly. This concept supports to identify service units, organize that units and integrate them to make a software system. In this paper, we introduce SOA to improve legacy system for reducing duplicated functions and relax the difficulties of maintenance. We try to analyze function flow of warehouse management system and reorganize it to reduce duplicated implementation. Also the system architecture is tried to improve considering connection with other ERP systems.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.27 no.4
• /
• pp.215-222
• /
• 2014

The objective of this research is to evaluate the seismic performance of steel intermediate moment frames(IMFs) with different heights. The seimic performance is conducted according to ATC-63. Three-, six, nine- and twelve-story IMFs are designed according to KBC 2009. The connection is modeled to have a drift capacity of 0.02rad, which is required for IMF connections. This study shows that the probability of collapse increases with an increase in the height of the frame. Nine- and twelve-story frames did not satisfy the requirement specified in ATC-63.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.4
• /
• pp.247-252
• /
• 2013

Korea gas corporation (KOGAS) is responsible for the whole sale of natural gas in the domestic market. It is important to forecast the daily demand of city gas for supply and demand control, and delivery management. Since there is the autoregressive characteristic in the daily gas demand, we introduce a modified autoregressive model as the first step. The daily gas demand also has a close connection with the outdoor temperature. Accordingly, our second proposed model is a temperature-based model. Those two models, however, do not meet the requirement for forecasting performances. To produce acceptable forecasting performances, we develop a weighted average model which compounds the autoregressive model and the temperature model. To examine our proposed methods, the forecasting results are provided. We confirm that our method can forecast the daily city gas demand accurately with reasonable performances.

• Journal of the military operations research society of Korea
• /
• v.27 no.2
• /
• pp.88-109
• /
• 2001

Defense minister of the ROK, Kim Bong-sin suggested that the ROK′s military build-up policy will change from "scenario-based" to "capability-based". Entering the 1990s the ROK′s military build-up policy met difficulties to accomplish its goal, modernizing and strengthening of its force structure and weapon systems because of limited budget. The concept of capability-based military build-up could commit a fault in estimating total amount of defense resources required for force planing. This is because that the total amount of defense resources related to force plan for the 15 years is fixed to embody military strategy. The concept of capability-based military build-up plays a role as a constraint in choosing a military strategy. This has no connection with military build-up. Therefore the resources of mid-term military build-up program and scale of annual defense budget could be affected by the situations of its national economy. In this respect, the scale of annual defense budget and resources could be changed in accordance with national economic condition, however, the total amount of resources required to build-up military force for 15 years, namely resources of military force planing requirement for 15 years, is given already for the accomplishment of military strategy. The purpose of this study is to seek a direction of the ROK′s military build-up policy in a viewpoint of capability-based military build-up.