• Journal of Korean Society on Water Environment
• /
• v.32 no.6
• /
• pp.562-569
• /
• 2016

Recently, Low Impact Development (LID) is being used in Korea to control urban runoff and nonpoint source pollution. In this study, we evaluated the reduction of surface runoff from a study area, as the effect of connecting three bioretention as LID-BMP. Surface runoff and storage volume of bioretention is estimated by the Curve Number (CN) method. In this study, the storage volume of bioretention is divided by the volume of surface runoff and precipitation which directly enters the bioretention. The ratio of captured surface runoff volume to storage volume is highly influenced by the ratio of drainage area to surface area of bioretention. The high bioretention surface area-to-drainage area ratio captures more surface runoff. The ratio of 1.2 captures 51~54% of the total surface runoff, ranging from 5-30cm of bioretention depth; a ratio of 6.2 captures 81~85%. Three connected bioretentions could therefore captures much more runoff volume, ranging from $35.8{\sim}167.3m^3$, as compared to three disconnected bioretentions at their maximum amount of precipitation with non-effluent from the connecting three bioretentions. Hence, connecting LID-BMPs could improve the removal efficiencies of surface runoff volume and nonpoint source pollution.

• Progress in Superconductivity and Cryogenics
• /
• v.14 no.1
• /
• pp.1-3
• /
• 2012

LMO($LaMnO_3$) buffer layer of superconducting coated conductor was deposited on IBAD-MgO template in the plasma atmosphere at $650^{\circ}C$ which is relatively low compared with conventional deposition temperature of more than $800^{\circ}C$. Deposition method of LMO was DC sputtering, and target and deposition chamber were connected to the cathode and anode respectively. When DC voltage was applied between target and chamber, plasma was formed on the surface of target. The tape substrate was located with the distance of 10 cm between target and tape substrate. When anode bias was connected to the tape substrate, electrons were attracted from plasma in target surface to the tape substrate, and only tape substrate was heated by electron bombardment without heating any other zone. The effect of electron bombardment on the surface of substrate was investigated by increasing bias voltage to the substrate. We found out that the sample of electron bombardment had the effect of surface heating and had good texturing at low controlling temperature.

• Journal of the Korean Mathematical Society
• /
• v.40 no.6
• /
• pp.1015-1029
• /
• 2003

In this paper, we study a connected, simply connected homogeneous Kahler surface with distinct constant Ricci eigenvalues, and specify the local structure of them.

• Communications of the Korean Mathematical Society
• /
• v.32 no.3
• /
• pp.479-494
• /
• 2017

We construct various examples of simply connected minimal complex surfaces of general type with $p_g=0$ and $K^2=1,2$ using ${\mathbb{Q}}$-Gorenstein smoothing method.

• Bulletin of the Korean Mathematical Society
• /
• v.54 no.5
• /
• pp.1851-1857
• /
• 2017

We study relations between two descriptions of closed orientable 3-manifolds: as branched coverings and as Heegaard splittings. An explicit relation is presented for a class of 3-manifolds which are branched cyclic coverings of connected sums of lens spaces, where the branching set is an axis of a hyperelliptic involution of a Heegaard surface.

• Journal of the Korean Mathematical Society
• /
• v.47 no.5
• /
• pp.925-934
• /
• 2010

A crystallization of a closed connected PL manifold M is a special edge-colored graph representing M via a contracted triangulation. The regular genus of M is the minimum genus of a closed connected surface into which a crystallization of M regularly embeds. We disprove a conjecture on the regular genus of $\mathbb{S}\;{\times}\;\mathbb{S}^n$, $n\;{\geq}\;3$, stated in [J. Korean Math. Soc. 41 (2004), no. 3, p. 420].

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.162-162
• /
• 2011

Nanometer-sized noble metals can trap and guide sunlight for enhanced absorption of light based on surface plasmon that is beneficial for generation of hot electron flows. A pulse of high kinetic energy electrons (1-3 eV), or hot electrons, in metals can be generated after surface exposure to external energy, such as in the absorption of light or in exothermic chemical processes. These energetic electrons are not at thermal equilibrium with the metal atoms. It is highly probable that the correlation between hot electron generation and surface plasmon can offer a new guide for energy conversion systems [1-3]. We show that hot electron flow is generated on the modified gold thin film (<10 nm) of metal-semiconductor (TiO2) Schottky diodes by photon absorption, which is amplified by localized surface plasmon resonance. The short-circuit photocurrent obtained with low energy photons (lower than bandgap of TiO2, ~3.1-3.2 eV) is consistent with Fowler's law, confirming the presence of hot electron flows. The morphology of the metal thin film was modified to a connected gold island structure after heating to 120, 160, 200, and 240$^{\circ}C$. These connected island structures exhibit both a significant increase in hot electron flow and a localized surface plasmon with the peak energy at 550-570 nm, which was separately characterized with UV-Vis [4]. The result indicates a strong correlation between the hot electron flow and localized surface plasmon resonance with possible application in hot electron based solar cells and photodetectors.

• Honam Mathematical Journal
• /
• v.32 no.1
• /
• pp.141-155
• /
• 2010

In this paper we prove that with some hypothesis the set of k-isomorphism classes of simple closed k-surfaces in ${\mathbf{Z}}^3$ forms a commutative monoid with an operation derived from a digital connected sum, k ${\in}$ {18,26}. Besides, with some hypothesis the set of k-homotopy equivalence classes of closed k-surfaces in ${\mathbf{Z}}^3$ is also proved to be a commutative monoid with the above operation, k ${\in}$ {18,26}.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.4
• /
• pp.1177-1181
• /
• 2014

A 2D grid-like (4, 4)-connected topology coordination polymer, $[Co(BTA)_2(H_2O)_2]_n$ (1), where HBTA = 2-(1H-benzotriazol-1-yl)acetic acid, has been synthesized by hydrothermal method and characterized by single crystal X-ray diffraction, IR spectroscopy, elemental analysis and surface photovoltage spectroscopy (SPS). X-ray diffraction analyses indicated that 1 displays octahedral metal centers with secondary building units (SBUs) [$Co(BTA)_2(H_2O)_2$] bridged by the $BTA^-$ ligands. In the crystal, the 2D supramolecular architecture is further supported by $O-H{\cdots}O$, $O-H{\cdots}N$, $C-H{\cdots}O$ hydrogen bonds and ${\pi}{\cdots}{\pi}$ stacking interactions. The SPS of polymer 1 indicates that there are positive response bands in the range of 300-600 nm showing photo-electric conversion properties. There are good relationships between SPS and UV-Vis spectra.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.5
• /
• pp.469-473
• /
• 2009

We present high-voltage liquid-electrolyte microbatteries, inspired from the high-voltage generation mechanism of electric eels using serially connected multiple-cell arrays. In the microbatteries, we purge air into the electrolyte filled in a channel layer to isolate serially connected multiple cell arrays using three surface-tension valves (cell-front, outlet, and cell-end valves). Compared to the previous multi-cell stack or interconnection, present microbatteries provide a reduced multi-cell charging time. We have designed and characterized four different prototypes C1, C10, C20, and C40 having 1, 10, 20, and 40 cells, respectively. In the experimental study, the threshold pressures of cell-front, outlet, and cell-end valves were measured as $460{\pm}47$, $1,000{\pm}53$, and $2,800{\pm}170$ Pa, respectively. The average charging time for C40 was measured as $26.8{\pm}4.9$ seconds where the electrolyte and air flow-rates are 100 and $10{\mu}l/min$, respectively. Microbatteries showed the maximum voltage of 12 V (C40), the maximum power density of $110{\mu}W/cm^2$ (C40), and the maximum power capacity of $2.1{\mu}Ah/cm^2$ (C40). We also proposed a tapered-channel to remove the reaction gas from the cell chamber using a surface tension effect. The present microbatteries are applicable to high-voltage portable power devices.