• 대한수학회보
• /
• 제56권2호
• /
• pp.515-520
• /
• 2019

We give new evidence that "complicated" Heegaard surfaces behave like incompressible surfaces. More precisely, suppose that a closed connected orientable 3-manifold M contains a closed connected incompressible surface F which separates M into two (connected) components $M_1$ and $M_2$. Let S be a Heegaard surface of M. Our result is that if the Hempel distance of S is at least four, then S is isotoped so that $S{\cap}M_i$ is incompressible for each i = 1, 2.

• 반도체디스플레이기술학회지
• /
• 제21권1호
• /
• pp.22-26
• /
• 2022

This paper proposes a new method for the recognition of road surface marks and numbers. The proposed method designates a region of interest on the road surface without first detecting a lane. The road surface markings are extracted by location and size using a connection component analysis. Distortion due to the perspective effect is minimized by normalizing the size of the road markings. The road surface marking of the connected component is recognized by matching it with the stored road marking templates. The proposed method is implemented using C language in Raspberry Pi 4 system with a camera module for a real-time image processing. The system was fixedly installed in a moving vehicle, and it recorded a video like a vehicle black box. Each frame of the recorded video was extracted, and then the proposed method was tested. The results show that the proposed method is successful for the recognition of road surface marks and numbers.

• 한국정보과학회논문지:시스템및이론
• /
• 제29권8호
• /
• pp.440-444
• /
• 2002

본 논문에서는 회전체(surface of revolution)의 isophote를 계산하는 효율적이고 안정성 있는 알고리즘을 제시한다. 회전체는 곡면의 특성 상 곡면이 원의 집합으로 이루어지며 하나의 원 위에 있는 점들에 대한 법선 벡터의 집합은 하나의 원뿔(cone)을 이룬다. 원뿔을 이루는 법선 벡터의 특성과 회전체의 대칭성을 이용하여 곡선과 직선의 교점 계산만으로 isophote에 속한 모든 구성요소(connected component)를 발견하는 방법을 제시한다. 또한 회전체 곡면 상의 isophote를 매개변수 곡선으로 표현함으로써 곡선을 쉽게 추적하는 방법을 제시한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.3056-3059
• /
• 2000

This paper describes a fast image labeling algorithm for the feature extraction of connected components. Labeling the connected regions of a digitized image is a fundamental computation in image analysis and machine vision, with a large number of application that can be found in various literature. This algorithm is designed for the surface defect inspection of Cold Mill Strip. The labeling algorithm permits to separate all of the connected components appearing on the Cold Mill Strip.

• 제어로봇시스템학회논문지
• /
• 제12권11호
• /
• pp.1156-1161
• /
• 2006

This paper describes a fast image labeling algorithm for the feature extraction of connected components. Labeling the connected regions of a digitized image is a fundamental computation in image analysis and machine vision, with a large number of application that can be found in various literature. This algorithm is designed for the surface defect inspection of Cold Mill Strip. The labeling algorithm permits to separate all of the connected components appearing on the Cold Mill Strip.

• 한국생산제조학회지
• /
• 제9권2호
• /
• pp.52-58
• /
• 2000

the quality of a TV is closely connected with the high quality surface of Braun tube. To get high quality surface an improved grinding system is needed. It has three main parts : the housing part of supporting frame the outershaft part rotat-ed by motor and the innershaft part having eccentricity from the rotation axis of the outershaft. the housing part and the outershaft part are connected by outerbearings, The outershaft part and the innershaft part are connected by innerbearings. Although the outershaft part is rotated at high-speed the innershaft part is not rotated by offset coupling. The high quality grinding surface can be obtained by this mechanism of panel surface grinder, Because the innershaft is unbalanced by eccentricity from rotation axis of outershaft the unbalancing vibration is resulted In this rotor system with high-speed rota-tion the unbalancing vibration makes the opertion unstable. In this research the transfer function is obtained bythe frequency response analysis of finite element model. The simu-lation result is proved by comparing with the experimental result measured by signal analyzer Then the results are corre-lated. in order to improve the design an optimization method is used instead of two-planes balancing method The parts of the 3-dimensional panel surface grinder satisfy the each constraint, The result shows that the design of the panel surface grinder can be optimized.

• 한국표면공학회지
• /
• 제38권6호
• /
• pp.216-226
• /
• 2005

Pb-Free Technology was born with environmental problems of electronic component, Being connected by big and small project of every country. Also, in each country environment is connected and various standards of IEC, ISO, MIL, JIS, KS, JEDEC, EIAJ etc. All products can divide at solder part and finishing part These can tested each and synthetically divide. This research is reliability evaluation for three kind of ph-free SnCu solder plating solution and it's deposit. First, executed analysis about Pure Sn, SnCu solutions and plating surface by way similar to other plating solution analysis. Next, executed reliability about test method and equipment for reliable analyzer system construction. Next, data comparison and estimation, main estimation test method and item's choice. In this paper the systematic surface analysis and reliability for plating solutions and it's deposit in metal surface finishing processes could be shown.

• 연구논문집
• /
• 통권27호
• /
• pp.183-200
• /
• 1997

We have calculated the energy of three distinct grain configurations, namely completely connected, partially connected and unconnected configurations, evolving during a spheroidization of polycrystalline thin film by extending a geometrical model due to Miller et al. to the case of spheroidization at both the surface and film-substrate interface. "Stabilitl" diagram defining a stable region of each grain configuration has been established in terms of the ratio of grain size to film thickness vs. equilibrium wetting or dihedral angles at various interface energy conditions. The occurrence of spheroidization at the film-substrate interface significantly enlarges the stable region of unconnected grain configuration thereby greatly facilitating the occurrence of agglomeration. Complete separation of grain boundary is increasingly difficult with a reduction of equilibrium wetting angle. The condition for the occurrence of agglomeration differs depending on the equilibrium wetting or dihedral angles. The agglomeration occurs, at low equilibrium angles, via partially connected configuration containing stable holes centered at grain boundary vertices, whereas it occurs directly via completely connected configuration at large equilibrium angles except for the case having small surface and/or film-substrate interface energy. The initiation condition of agglomeration is defined by the equilibrium boundary condition between the partially connected and unconnected configurations for the former case, whereas it can, for the latter case, largely deviate from the equilibrium boundary condition between the completely connected and unconnected configurations because of the presence of a finite energy barrier to overcome to reach the unconnected grain configuration.

• Nuclear Engineering and Technology
• /
• 제25권4호
• /
• pp.507-514
• /
• 1993

Titanium재료는 해수에서 좋은 내식성을 가지는 이유로 최근 원자력발전소 복수기에 사용되고 있다. 그러나, Ti이 tubesheet재 료인 Cu 합금에 접하고 이것이 water box 재료인 탄소강에 접하게될 경우 접촉금속에 심한 galvanic corrosion이 일어나게 된다. 전기화학적 실험에 의하면, 탄소강이 해수속에서 Ti나 Cu에 접할 때 탄소강의 부식속도는 증가할 것이며, Cu가 Ti에 해수중에서 장기간 접촉할 경우에는 Cu의 부식속도는 증가할 것으로 생각된다, 또한 표면적비, R$_1$(surface area of carbon steel/surface area of Ti).와 R$_2$(surface area of carbon steel/surface area of Cu)가 탄소강의 galvanic corrosion에 매우 중요하며. Water box 재료인 탄소강의 부식속도를 최소화하기 위해서는 이들 표면적비가 낮게 유지되어서는 안될 것이라고 생각된다 침지 galvanic 부식 시험결과 surface area of Fe/surface area of Al Brass값이 1일때 탄소강의 부식속도는 4.4mpy 이었으나 이 비가 $10^{-2}$ 일때는 570mpy이었다. 이렇게 연결된 galvanic시편에 Ti tube를 연결한 경우에는 이 비가 1일때 탄소강의 부식율이 4.4mpy에서 13mpy로 증가하였다. 이는 R$_1$가 R$_2$가 분극곡선에 복합적인 영향을 미치는것으로 설명할 수 있다.

• 한국컴퓨터그래픽스학회논문지
• /
• 제7권3호
• /
• pp.1-7
• /
• 2001

본 논문에서는 canal 곡면의 투시 윤곽곡선 (perspective silhouette)에 대한 매개변수화 (parametrization) 방법과 윤곽곡선을 이루는 모든 연결된 구성요소 (connected component)를 발견하는 효율적이고 안정성 있는 알고리즘을 제시한다. Canal 곡면은 반경이 변화하면서 이동하는 구 (moving sphere)의 외곽곡면 (envelope surface)이며, 구의 중심점의 궤적을 나타내는 곡선 C(t)와 구의 반경 함수 r(t)에 의해 정의된다. 이동 구는 canal 곡면과 원에서 교차한다. Canal 곡면을 원의 집합으로 분할함으로써, 각각의 원 위에서 주어진 관측점에 대한 투시적 윤곽곡선을 구성하는 점을 계산하여 매개변수화하는 방법을 제시한다. 고정된 중심점 $C(t_*)$와 반경 $r(t_*)$를 갖는 이동 구는 canal 곡면과 하나의 원 $K(t_*)$에서 교차한다. 또한 이동 구를 관측점에서 볼 때의 윤곽곡선도 다른 하나의 원 $Q(t_*)$을 구성한다. 두 원 $K(t_*)$와 $Q(t_*)$가 한 점에서 접하게 되는 t의 값을 구함으로써 canal 곡면에 대한 윤곽곡선을 이루는 모든 연결된 구성요소를 발견하는 효율적인 방법을 제시한다.