• 제목/요약/키워드: Conformal

검색결과 770건 처리시간 0.026초

차량용 플라스틱 혼 커버의 사출성형 싸이클 타임 개선을 위한 냉각 채널의 수치해석 연구 (Numerical Analysis of Cooling Channels for Injection Molding Cycle Time Improvement of Plastic Horn Cover for an Automobile)

  • 한성렬
    • 한국기계가공학회지
    • /
    • 제17권5호
    • /
    • pp.84-90
    • /
    • 2018
  • When producing a plastic horn cover for an automobile, since the interval between the ribs on the inner surface is narrow, conventional cooling channels cannot be applied and cooling of the mold is difficult. For this reason, the molding operation cannot be completed within a set cycle time. In this study, a conformal cooling channel was applied on the mold to solve the cooling problem. Injection molding simulation was carried out to confirm the effectiveness of the conformal cooling channel. In the analysis results, the mold temperature at the rib section decreased by 33%, and the mold temperature also decreased by 31%. This reduction in temperature allowed for molding within a set cycle time and demonstrated the effectiveness of the conformal cooling channel.

Conformal Coating 된 PCB에서 회로 소자의 경계면과 평탄면 영역 추정 (Boundary and Flat Area Estimation of Circuit Elements in Conformal Coated PCB)

  • 이동희;강명환;조성령;정경훈;강동욱
    • 한국방송∙미디어공학회:학술대회논문집
    • /
    • 한국방송∙미디어공학회 2018년도 하계학술대회
    • /
    • pp.8-10
    • /
    • 2018
  • 자동차에서 전장부품이 차지하는 비중이 증가하고 있다. 그런데 전장부품이 증가하면서 전자제어장치의 오작동으로 인한 사고 및 인명손실의 위험이 커졌다. 자동차 환경에서 발생하는 진동, 열기, 습기, 전자파를 차단하여 전장부품의 안정성을 확보와 위험을 최소화하기 위해 자동차 OEM에서는 Conformal Coating 기술을 적용하는 것이 일반적이다. Conformal Coating된 PCB 회로의 신뢰성을 높이기 위해서는 코팅 과정에서 발생하는 기포를 억제해야 한다. 그럼에도 불구하고 기포가 발생한 경우에는 해당 PCB를 폐기하는 것이 중요하다. 본 논문에서는 코팅된 PCB에서 발생한 기포를 자동으로 검사하기 위한 전처리 과정으로서 검사 소자의 경계면과 평탄면 영역을 추정/분할하는 영상처리 알고리즘을 제안한다. 코팅 기포의 특성이 소자의 경계면과 평탄면에서 매우 다르게 나타나므로 효율적인 기포 검출을 위해서 영역 분할은 필수적인 전처리 과정이다.

  • PDF

비인강암환자에서 시행한 3차원 입체조형 방사선치료의 조기 임상결과 (Initial Experience for 3-D Conformal Boost Treatments in Carcinoma of the Nasopharynx)

  • 장지영;조문준;김기환;송창준;김병국;김준상;김재성
    • 대한두경부종양학회지
    • /
    • 제16권2호
    • /
    • pp.172-176
    • /
    • 2000
  • Objectives: To improve local control and reduce toxicity, 3-D conformal radiotherapy was used as a boost the primary tumor site following fractionated radiotherapy in patients with nasopharyngeal carcinoma. Materials and Methods: Eight patients with previously untreated nasopharyngeal carcinomas were treated with 3-D conformal radiotherapy following fractionated radiotherapy from September 1998 to April 2000. All patients had biopsy confirmation of disease before radiation therapy. Stages were II in 1, III in 5, and IV in 2. Two patients received cisplatin based chemotherapy in addition to radiation therapy; induction chemotherapy in 1, concurrent chemoradiation in 1. 3-D conformal radiotherapy delivered using 6MV Linac as a boost(range 25.2-28.8Gy, median 25.7Gy) following conventionally fractionated radiotherapy(range 50.4Gy). Average total dose ranged from 75.6-79.2Gy(median 76Gy). Follow-up time was 4-21 months(median 9.6 months). Results: Seven of 8 patients were evaluated radiologically within 3 months after completion of radiation therapy. All 7 patients were seen complete remission. One of 7 patients had distant metastasis after 5 months and local failure after 7 months. The tree interval of local recurrence was ranged from 4 - 21 months(median 10.2 months). One patient without radiological evaluation got complete remission clinically. Treatment related toxicity was grade 1-3 xerostomia, dysphagia, and mucositis. During 3-D conformal radiotherapy, there was no aggravation of any toxicity. Conclusion: Although the number of patients was small and follow-up period was short, 3-D conformal radiotherapy following conventional radiotherapy improved tumor control and dose escalation without increased toxicity. Survival and late toxicity should be evaluated through long term follow-up. In addition, it is necessary to confirm the benefits of 3-D conformal radiotherapy in nasopharyngeal carcinoma with randomized trial.

  • PDF

A SIMPLE PROOF OF GRÖTZSCH'S PRINCIPLE

  • Chung, Bo-Hyun
    • 충청수학회지
    • /
    • 제13권1호
    • /
    • pp.65-70
    • /
    • 2000
  • The purpose of this paper is to apply the extremal length to conformal mappings. We drive an interesting formula of Gr$\ddot{o}$tzsch by an alternative simple method.

  • PDF

A note on partially conformal geodesic transformation on the Kahler manifolds

  • Cho, Bong-Sik
    • 한국수학사학회지
    • /
    • 제16권3호
    • /
    • pp.109-114
    • /
    • 2003
  • In this paper, we deal with partially conformal geodesic transformations in Kahler geometry by using Fermi coordinates when tile submanifold is a geodesic sphere. We derive the necessary and sufficient condition for tile existence of such transformation in terms of the Jacobi operator and its derivative.

  • PDF