• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.379.1-379.1
• /
• 2016

Recently, new types of wearable devices such as textile electronics are considered as the next generation wearable electronics. To realize the textile electronics, conductive fibers are required to supply the power and for signal processing. Conventionally, silver nanowires (Ag NWs) have been attracted as one of the conductive additives in the fibers, however, using the Ag NWs may lead to high production cost since it is a noble metal. Many researches have been done to replace the Ag NWs into a cheaper materials such as copper nanowires (Cu NWs). Here, we synthesized ultra-long Cu NWs for a conductive filler material in conductive fibers, taking advantages of their structural features. To investigate the effect of capping agents on the aspect ratio of the synthesized Cu NWs, we used various capping agents such as hexadecylamine, butylamine, ethylenedilamine and oleylamine in the Cu NW synthesis. In this research, the effects of capping agents on the structure and the synthesis of Cu NWs are presented.

• Carbon letters
• /
• 제15권1호
• /
• pp.38-44
• /
• 2014

This paper reports the effect of adding reduced graphene oxide (RGO) as a conductive material to the composition of an electrode for capacitive deionization (CDI), a process to remove salt from water using ionic adsorption and desorption driven by external applied voltage. RGO can be synthesized in an inexpensive way by the reduction and exfoliation of GO, and removing the oxygen-containing groups and recovering a conjugated structure. GO powder can be obtained from the modification of Hummers method and reduced into RGO using a thermal method. The physical and electrochemical characteristics of RGO material were evaluated and its desalination performance was tested with a CDI unit cell with a potentiostat and conductivity meter, by varying the applied voltage and feed rate of the salt solution. The performance of RGO was compared to graphite as a conductive material in a CDI electrode. The result showed RGO can increase the capacitance, reduce the equivalent series resistance, and improve the electrosorption capacity of CDI electrode.

• 한국분말재료학회지
• /
• 제25권4호
• /
• pp.291-295
• /
• 2018

A conductive additive is prepared by dispersing multi-walled carbon nanotubes (MWCNTs) on Cu powder by mechanical milling and is distributed in epoxy to enhance its electrical conductivity. During milling, the MWCNTs are dispersed and partially embedded on the surface of the Cu powder to provide electrically conductive pathways within the epoxy-based composite. The degree of dispersion of the MWCNTs is controlled by varying the milling medium and the milling time. The MWCNTs are found to be more homogeneously dispersed when solvents (particularly, non-polar solvent, i.e., NMP) are used. MWCNTs gradually disperse on the surface of Cu powder because of the plastic deformation of the ductile Cu powder. However, long-time milling is found to destroy the molecular structure of MWCNTs, instead of effectively dispersing the MWCNTs more uniformly. Thus, the epoxy composite film fabricated in this study exhibits a higher electrical conductivity than 1.1 S/cm.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.105-108
• /
• 2002

Materials, matrices mixed with various kinds of conductive or magnetic powder, such as ferrite, have been used as the electromagnetic wave absorbing ones, so called RAM(radar absorbing material). The structure that does not only have electromagnetic waves absorbing property like RAM but also supports loads is called RAS(radar absorbing structure). One of the existing manufacturing process of RAS is to compound with conductive powders the glass fiber-reinforced composite with good permeability and the ability to support loads. The process, however, causes a number of problems, such as the degradation in the mechanical properties of the composite, especially, interlamina shear strength. In this study, mechanical properties of glass fabric/epoxy composite containing 7wt% carbon black powders were measured and compared with pure glass fabric/epoxy composites.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.497-501
• /
• 2004

The primary failure causes of underground distribution power cables are water penetration in insulation layer and stress enhancement at inner semi-conductive layer. Accordingly, it is needed to improve the materials and the structure of power cables for extending lifetime and preventing failure. We uses non-flaming PE materials instead of PVC as a covering material and encapsulating structure. We also use super smooth class material as a inner semi-conductive layer. The newly developed cables are improved in AC breakdown voltage after ageing tests.

• 한국인터넷방송통신학회논문지
• /
• 제9권3호
• /
• pp.173-178
• /
• 2009

금속산화물 박막 소자를 제작하여 전기적 특성을 조사하였다. 소자는 Electrode를 TOP-TOP구조로 제작하였으며 스위칭 특성을 연구하기 위해 전극간의 산화금속박막의 전도특성이 측정되었다. 소자의 저항변화는 전압을 선형적으로 인가하여 측정하였다. 제작된 소자는 MIM구조로써 외부에서 인가하는 전기적 신호에 의하여 전기전도도가 큰 On-state와 전기전도도가 낮은 Off-state로 바뀌는 특성을 나타내었다. $Si/SiO_2/MgO$ 소자는 Forming에 의해 저항이 큰 상태에서 저항이 작은 상태로 전기적 특성이 변화하면서 스위칭 특성을 보였다. 본 연구를 통하여 산화금속은 차세대 비휘발성 메모리로는 물론 다른 전기적 응용이 기대되는 물질임을 확인하게 되었다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
• /
• pp.300-301
• /
• 2003

As the demand for high frequency(bandwidth) optical module is increased, there is a need for fabricating silicon optical bench(SiOB) with low parasitic impedance. In this paper, we discuss multi-layer structure method for manufacturing SiOB with low capacitance. This structure method decreases the capacitance between the conductive patterns for about 94∼97％ compared to the conventional structure without raising the resistivity of silicon, or increasing the thickness of the dielectric film.

• 지구물리와물리탐사
• /
• 제17권1호
• /
• pp.28-33
• /
• 2014

최근 제주도 서부 중산간(해발고도 400 ~ 900 m) 지역에서 획득된 자기지전류(MT) 탐사자료와 제주도 중산간 전역에서 획득되었던 기존 MT 탐사 자료의 1차원 역산을 통하여 서귀포층과 U층으로 대표되는 퇴적층에 해당하는 저비 저항층의 분포형태를 살펴보았다. 저비저항층의 상부경계는 제주도 표고와 매우 높은 양의 상관관계를 가지고 있으며 하부경계는 표고와 음의 상관관계를 가진다. 즉, 저비저항층은 제주도 중앙부에서 두꺼운 렌즈 형태를 하고 있으며 그 하부의 기반암은 중앙부에서 오목한 형태일 가능성이 높다. 이러한 표고와의 상관성을 고려하는 크리깅을 수행하여 제주도의 지전기 구조 모델을 제시하였다. 하지만 한라산의 화도를 따라 3차원 형태의 저비저항 이상체가 존재할 가능성과 시추공 자료와의 차이를 발생시키는 원인을 규명하기 위하여 3차원 모델링과 다른 지구물리탐사나 물리검층 자료와의 복합해석이 요구된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제27권5호
• /
• pp.67-74
• /
• 2023

세계적으로 많은 수의 콘크리트 구조물이 건설되어 사용되고 있다. 구조물을 안전하고 지속적으로 사용하기 위해서는 꾸준한 점검과 유지관리가 필요하다. 인력을 활용한 점검과 유지관리 기법은 효율적이긴 하지만, 현장 점검이 이루어지는 시점에 대한 단속적인 상태에 대한 점검만 가능하다. 이에 구조물의 상태를 연속적으로 모니터링 할 수 있는 시스템의 필요가 높아지고 있다. 따라서, 콘크리트 구조물의 표면에 전도성도막을 설치하여 균열 및 손상의 탐지하는 연구를 수행하였다. 콘크리트 구조물의 구조적 특성을 반영하여 균열의 발생과 진전을 모니터링 할 수 있는 병렬저항 형식의 균열감지패턴을 개발하였고, 이에 대한 실증연구를 수행하였다. 철근콘크리트 보부재를 제작하여 균열감지패턴을 설치하였고, 하중가력실험을 통해 균열 모니터링의 가능성을 검증하였다.

• Journal of Microbiology and Biotechnology
• /
• 제16권3호
• /
• pp.399-407
• /
• 2006

In this study, an electrical conductive carbon fiber was used as a biofilter matrix to electrochemically improve the biofilter function. A bioreactor system was composed of carbon fiber (anode), titanium ring, porcelain ring, inorganic nutrient reservoir, and VOC reservoir. Electric DC power of 1.5 volt was charged to the carbon fiber anode (CFA) to induce the electrochemical oxidation potential on the biofilter matrix, but not to the carbon fiber (CF). We tested the effects of electrochemical oxidation potential charged to the CFA on the biofilm structure, the bacterial growth, and the activity for metabolic oxidation of VOCs to $CO_2$, According to the SEM image, the biofilm structure developed in the CFA appeared to be greatly different from that in the CF. The bacterial growth, VOCs degradation, and metabolic oxidation of VOCs to $CO_2$ in the CFA were more activated than those in the CF. On the basis of these results, we propose that the biofilm structure can be improved, and the bacterial growth and the bacterial oxidation activity of VOCs can be activated by the electrochemical oxidation potential charged to a biofilter matrix.