• 대한기계학회논문집B
• /
• 제27권5호
• /
• pp.668-676
• /
• 2003

The effect of nozzle height on heat transfer of a hot steel plate cooled by an impinging liquid jet is not well understood. Previous studies have been based on the dimensionless parameter z/d. To test the validity of this dimensionless parameter and to investigate gravitational effects on the jet, stagnation velocity of an impinging liquid jet were measured and the cooling experiments of a hot steel plate were conducted for z/d from 6.7 to 75, and an inverse heat conduction method is applied for the quantitative comparison. Also, the critical instability point of a liquid jet was examined over a range of flow rates. The experimental velocity data for the liquid jet were well correlated with the dimensionless number 1/F $r_{z}$$^2$based on distance. It was thought that the z/d parameter was not valid for heat transfer to an impinging liquid jet under gravitational forces. In the cooling experiments, heat transfer was independent of z when 1/F $r_{z}$$^2$< 0.187(z/d = 6.7). However, it was found that the heat transfer quantity for 1/F $r_{z}$$^2$=0.523(z/d = 70) is larger 11% than that in the region for 1/F $r_{z}$$^2$=0.187. The discrepancy between these results and previous research is likely due to the instability of liquid jet.uid jet.

• 대한기계학회논문집B
• /
• 제41권1호
• /
• pp.37-46
• /
• 2017

가열된 표면에서의 액적은 일반적으로 내부에 마랑고니 유동이 발생하고, 이는 불균일한 침전물 패턴 형상을 구성하게 된다. 본 연구는 마랑고니 유동을 가시화하고, 수직진동을 사용해서 이를 제어하는 것을 주 목적으로 한다. 액적이 증발하는 동안, 액적의 접촉각 변화와 부피변화를 실험적으로 알 수 있었고, PIV(Particle Image Velocimetry) 실험 장치를 이용하여, 평판 온도별 마랑고니 유동의 내부 유동의 흐름을 가시화하였다. 그리고 평판에 각 주파수별 수직진동을 가해주는 실험을 진행하여, 그 결과 마랑고니 유동의 유동 방향과 수직진동의 유동 방향이 서로 반대인 것을 확인할 수 있었다. 마지막으로 증발하는 액적에 수직진동을 가해줌으로써, 액적의 하단부분에서 내부유동의 흐름변화를 관찰하였다. 마랑고니유동에 의해 발생하는 내부유동 방향과 수직진동으로 발생하는 내부유동의 방향이 서로 반대 방향이므로 가열된 평판에 진동을 가해주었을 때 액적 내부유동의 흐름이 변화가 발생하였고, 이는 곧 불균일한 침전물 패턴이 억제된 것을 증발 후 침전물의 패턴형상을 통해 확인할 수 있었다.

• 대한기계학회논문집
• /
• 제16권5호
• /
• pp.943-951
• /
• 1992

본 연구에서는 삭막에 의한 표면후퇴 현상을 해석하기 위하여 Brogan이 제시 한 front node dropping기법을 적용하여 여러개의 상이한 재료로 구성된 조합 내열 부품에서 삭마와 숯이 동시에 발생하는 경우에 대한 내부 열반응 예측도 가능하게 하 였다. 이 수치기법은 해석하고자 하는 부분에 대한 격자생성(mesh generation)을 수 행하여 각 격자점의 좌표를 고정한 후, 삭마에 의하여 표면이 후퇴될 때 첫번째 격자 점은 두번째 격자점과 일치될 때 까지 존재하다가 제거되고, 두번째 격자점도 세번째 격자점과 일치될 때까지 존재하다가 제거된다. 이때 나머지 격자점의 위치는 항상 일정하게 고정되며 삭마가 정지될 때까지 이 과정이 계속된다. 또한 본 연구분야에 수치해석 기법으로 유한해석법(FAM:finte analytic method)을 국내외 최초로 적용하여 비선형성이 심한 것을 효과적으로 처리하므로써 안정한 해를 얻을 수 있었다. 유한 해석법은 1981년 Chen이 제안한 기법으로, 국소 격자계에 대하여 선형화된 지배 방정 식의 엄밀해를 구하여 전체 문제 영역에 확장하는 방법이다. 이 방법은 수치 계산식 의 유도과정이 매우 복잡하기는 하나, 그 결과가 정확하고 안정한 해를 얻을 수 있어 서 점차 적용 사례가 증가하고 있으며 본 문제의 수치 해석에 매우 적합한 기법으로 판단된다.

• 대한전자공학회논문지
• /
• 제15권1호
• /
• pp.1-4
• /
• 1978

맥파검출용변환기설계의 기초자료 확립과 설계된 변환기를 이용한 맥추계구성 및 검출된 파형의 임상적 유효성을 검토했다. 광학적 검출방식에 의한 출력파형은 대동장의 생리학적인 이론파형과 동일한 파형으로 맥관계의 한 정보로써 이용할 수 있으며 여전소자에 의한 맥파의 미분파형은 고령자에게서 잘 나타나지 않는 절역의 정보가 분명히 표시되어져 임혈시간의 측정이 용이하다. 42명에 대한 평균임혈시간이 0.324±0.027초로 얻어져 생리학적 이론치와 같으며 맥파전달시간의 측정가능성이 검토되어졌다.

• 대한한방소아과학회지
• /
• 제28권1호
• /
• pp.14-23
• /
• 2014

Objectives The objective of this study is to report the effects of acupuncture on neonatal brachial plexus palsy (neonatal brachial plexopathy). Methods We treated the patient with acupuncture for 4 months. Acupuncture was performed on the infant with flaccid paresis of a lower extremity. The effects of neonatal brachial plexus injury were measured by the active movement scale and the electromyographic test. Results 1. In electromyographic test, conduction velocity in left median nerve was elevated. 2. Active movement scale score was increased from 6 to 27 during the 4 months of treatment. 3. Grasping power of the patient's left hand was 60% stronger than the first medical examination. Conclusions This study showed that acupuncture was effective in treating the symptoms of brachial plexopathy. The further studies might be also needed.

• 한국전문물리치료학회지
• /
• 제10권3호
• /
• pp.141-149
• /
• 2003

Median frequency can be regarded as a valid indicator of local muscle fatigue. As local muscle fatigue develops, the muscle fiber conduction velocity decreases, the fast twitch fibers are recruited less, and consequently the median frequency shifts toward the lower frequency area. The aim of this study was to test the characteristics of the median frequency according to exercise load (30% and 60% of MVC on the biceps brachii, 40% and 80% of MVC on the vastus lateralis) during the fatiguing isometric exercise. Thirteen healthy male volunteer students of Yonsei University were recruited. After the testing maximal voluntary isometric contraction, three variables (initial median frequency, regression slope, fatigue index) from the regression line of MDF data were measured in each exercise load. The results showed that the regression slope and fatigue index were significantly different for the biceps brachii, but not for the vastus lateralis initial MDF was not significant difference according to the exercise load on both muscles. The regression slope and fatigue index could monitor physiologic muscle change during fatiguing isometric exercise. The results showed that two MDF variables reflect the local muscle fatigue according to the exercise load.

• 대한기계학회논문집
• /
• 제16권1호
• /
• pp.142-155
• /
• 1992

본 연구에서는 실제 빙축열 시스템의 해석을 위한 기초 모델로서 수직원관 주 위의 응고과정에 대하여 밀도차와 자연대류 효과 및 최대 밀도점을 나타내는 밀도-온 도 관계식을 도입한 수치해석과 실험을 통하여 여러가지 매개변수들이 상변화에 미치 는 영향을 알아 보았다.

• 대한기계학회논문집B
• /
• 제23권8호
• /
• pp.945-956
• /
• 1999

This work reports a set of approximate analytical solutions describing the initial transient process of close-contact melting between a rectangular parallelepiped solid and a flat plate on which either constant temperature or constant heat flux is imposed. Not only relative motion of the solid block tangential to the heating plate, but also the density difference between the solid and liquid phase is incorporated in the model. The thin film approximation reduces the force balance between the solid weight and liquid pressure, and the energy balance at the melting front into a simultaneous ordinary differential equation system. The normalized model equations admit compactly expressed analytical solutions which include the already approved two-dimensional solutions as a subset. In particular, the normalized liquid film thickness is independent of all pertinent parameters, thereby facilitating to define the transition period of close-contact melting. A unique behavior of the solid descending velocity due to the density difference is also resolved by the present solution. A new geometric function which alone represents the three-dimensional effect is introduced, and its properties are clarified. One of the representative results is that heat transfer is at least enhanced at the expense of the increase in friction as the cross-sectional shape deviates from the square under the same contact area.

• The Korean Journal of Physiology
• /
• 제28권2호
• /
• pp.113-122
• /
• 1994

The present study was carried out to characterize the functional properties of spinomesencephalic tract (SMT) neurons in the lumbar spinal cord of urethane anesthetized rats. Extracellular single unit recordings were made from neurons antidromically activated by stimulation of the midbrain area, including the deep layers of superior colliculus, periaqueductal gray and midbrain reticular formation. Recording sites were located in laminae I-VII of spinal cord segments of L2-L5. Receptive field properties and responses to calibrated mechanical stimulation were studied in 78 SMT cells. Mean conduction velocity of SMT neurons was $19.1{\pm}1.04\;m/sec$. SMT units were classified according to their response profiles into four groups: wide dynamic range (58%), deep/tap (23%), high threshold (9%) and low threshold (3%). A simple excitatory receptive field was found for most SMT neurons recorded in superficial dorsal horn (SDH). Large complex inhibitory and/or excitatory receptive fields were found for cells in lateral reticulated area which usually showed long after-discharge. Most of SMT cells received inputs from $A{\delta}$ and C afferent fiber types. These results suggest that sensory neurons in the rat SMT may have different functional roles according to their location in the spinal cord in integrating and processing sensory inputs including noxious mechanical stimuli.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.49-55
• /
• 2004

This paper addresses a numerical simulation of the flow and heat transfer in a simplified model of helically coiled tube steam generator using a general purpose computational fluid dynamic analysis computer code. The steam generator model is comprised of a cylindrical shell and helically coiled tubes. A cold feed water entered the tubes is heated up, evaporates. and finally become a superheated steam with a large amount of heat transferred continuously from the hot compressed water at higher pressure flowing counter-currently through the shell side. For the calculation of tube side two-phase flow field formed by boiling, inhomogeneous two-fluid model is used. Both the internal and external turbulent flows are simulated using the standard k-e model. The conjugate heat transfer analysis method is employed to calculate the conduction in the tube wall with finite thickness and the convections in the internal and external fluids simultaneously so as to match the fluid-wall-fluid interface conditions properly. The numerical calculations are peformed for helically coiled tubes of steam generator at an integral type pressurized water reactor under normal operation. The effects of tube-side inlet flow velocity are discussed in details. The results of present numerical simulation are considered to be physically plausible based on the data and knowledge from previous experimental and numerical studies where available.