• International Journal of Internet, Broadcasting and Communication
• /
• v.8 no.4
• /
• pp.48-53
• /
• 2016

Noise and vibration pollution is emerging to people in high speed trains. And it is difficult to realization of eco-friendly railway system at noise problem. The railway internal noise is 73dB on average and over 80dB in the loudest section. In order to reduce noise, there are passive methods that are far from noise sources and theother active noise reducion method. In this paper, we propose a method of reduce noise by measure and estimate the noise condition of train environment using Bone-Conduction device. We use an anti-phase waveform for canceling of noise characteristic. With this new system, the noise from surrounding environments can be reduced.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.3
• /
• pp.409-419
• /
• 1994

This paper deals with the design criteria and conduction noise reduction of electronic ballast system which is based on half-bridge series inverters. The system is theoretically analyzed in six modes and operating frequency range is selected to obtain the high efficacy and no sound noise. It is proposed the criteria for determining the values of L and C which are the dey points in system design Because of high operating frequency, electromagnetic noise, especially conduction noise, is a serious problem in electronic ballasts. To reduce the conduction noise, the operation and attenuation characteristics of noise filter are analyzed and the method to determine the values of filter elements is proposed. Also, the parasitic components of the inductor and capacitor are taken into consideration in filter analysis. Digital simulations and experiments are carried out to prove the theoretical results. And perfor mances of the system are verified through tests.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.167-170
• /
• 1999

In this paper, we operate Synchronous Reluctance Motor(SynRM) using the two-phase conduction method. Acually SynRM is operated by the sinusoidal PWM method but in home-appliance there is many restrictions of making the motor such as the method of winding, the shape of rotor etc. Therefore it is possible that there is little difference of performance between the two-phase conduction method and the sinusoidal PWM method. In this paper the characteristics of motor noise will be analyzed especially in the case of using the two-phase conduction method by experiment results.

• The Journal of the Acoustical Society of Korea
• /
• v.31 no.6
• /
• pp.359-366
• /
• 2012

Today, people are exposed to the various noisy environments, such as in the buses, subway and supermarkets where there are a lot of people. The noise issue is getting more serious as people want to use portable sound equipment and mobile phones even under this noisy condition. People want to use the portable equipment to exchange the information freely and they set the volume as 15dB higher than the noise around them, which almost reach at 110 dB. That amount of sound can cause noise induced deafness to the users and another issue to the others as additional noise source. A Bone-conduction system can be a solution to reduce noise and enhance voice signal of mobile phone. In this paper, we propose the way of cancelling noise and enhancing speech signal of mobile phones, by installing bone-conduction feedback system with ordinary mobile phones. With this system, we can reduce the environment noise and enhance the voice quality of mobile phones. Using this method, we can enhance the signal by around 17 dB.

• Journal of Korea Multimedia Society
• /
• v.19 no.2
• /
• pp.128-137
• /
• 2016

In mobile communication, air conduction(AC) speech signal had been commonly used, but it was easily affected by ambient noise environment such as emergency, military action and rescue. To overcome the weakness of the AC speech signal, bone conduction(BC) speech signal have been used. The BC speech signal is transmitted through bone vibration, so it is affected less by the background noise. In this paper, we proposed noise cancellation algorithm of the BC speech signal using noise feature of decomposed bands. The proposed algorithm consist of three steps. First, the BC speech signal is divided into 17 bands using perceptual wavelet packet decomposition. Second, threshold is calculated by noise feature during short time of separated-band and compared to absolute average of the signal frame. Therefore, the speech and noise parts are detected. Last, the detected noise parts are removed and then, noise eliminated bands are re-synthesised. In order to confirm the efficiency of the proposed algorithm, we compared the proposed algorithm with conventional algorithm. And the proposed algorithm has better performance than the conventional algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1635-1638
• /
• 1997

A measurement of conduction veloctiy of the action potentials along the muscle fibres has been applied to various diagnosis. When we measure muscle fiber conduction velocity, it occurs that not only change of conduction velocity but alos inclusion of mipulse component by physiological and experimental reason. So, robuster time delay estimation algorithm than general methods[1] is needed to find correct time delay form these signals. In this paper we, propose new time delay estimation algorithms, robust in impulsive noise, by using characteristic of .alpha.-stable distribution whcih defines impulsive noise well. Then we apply proposed algorthms to measure muscle fiber conduction velocity and compare them with other studies.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.2
• /
• pp.255-265
• /
• 2009

This paper presents the acoustic noise and mechanical vibration reduction of a coreless brushless DC motor with an air dynamic bearing used in a digital lightening processor. The coreless brushless DC motor does not have a stator yoke or stator slot to remove the unbalanced force caused by the interaction between the stator yoke and the rotor magnet. An unbalanced force makes slotless brushless DC motors vibrate and mechanically noisy, and the attractive force between the magnet and the stator yoke increases power consumption. Also, when a coreless brushless DC motor is driven by a $120^{\circ}$ conduction type inverter, high frequency acoustic noise occurs because of the peak components of the phase currents caused by small phase inductance and large phase resistance. In this paper, a core-less brushless DC motor with an air dynamic bearing to remove mechanical vibration and to reduce power consumption is applied to a digital lightening processor. A $180^{\circ}$ conduction type inverter drives it to reduce high frequency acoustic noise. The applied methods are simulated and tested using a manufactured prototype motor with an air dynamic bearing. The experimental results show that a coreless brushless DC motor has characteristics of low power consumption, low mechanical vibration, and low high frequency acoustic noise.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.4
• /
• pp.207-214
• /
• 2011

Human auditory acuity decreases naturally due to aging. But recently cases of impaired hearing at a young age are increasing greatly. The biggest reason for such an increase of population with impaired hearing is popularization of various kinds of portable multimedia appliances. Many studies on impaired hearing due to noises caused by the earphone and headphone are being made, but there are few studies on noise-impaired hearing caused directly by mobile phone communication. Based on a precedent inquiry, this study proposes a technique for preventing noise-impaired hearing applying to an active noise reduction technique onto bone conduction speaker. This technique is a method for reducing noises by antiphase oscillation through bone conduction speaker with ambient noises. If the proposed system is applied, the noise level that is actually introduced to audition decreases by more than 12 dB, and such a decreased amount of sound volume fundamentally prevents the factors of noise-caused hearing difficulty due to mobile phone communication. Sensibility test results showed that adequate communication was possible even in such a situation where communication volume was decreased like this.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2632-2634
• /
• 1999

In this paper, we analyze the characteristics of Motor Noise according to PWM method, especially in the case of 2-phase conduction method. There are two types of PWM methods used usually. One is Lower-PWM and the other is Upper&Lower PWM. Because there is a difference between freewheeling path of both methods, Current profiles of two methods are different. This makes the difference of Torque Ripple and so difference of Noise Performance. In this paper, the path will be analyzed and the comparison of Noise performance of two types of PWM methods will be showed by experiment results.

• Korean Journal of Metals and Materials
• /
• v.49 no.4
• /
• pp.329-333
• /
• 2011

To develop wide-band noise absorbers with a special design for low-frequency performance, this study proposes a tin oxide (Sn-O) thin films as the noise absorbing materials in a microstrip line. Sn-O thin films were deposited on polyimide film substrates by reactive sputtering of the Sn target under flowing $O_{2}$ gas, exhibiting a wide variation of surface resistance (in the range of $10^{0}-10^{5}{\Omega}$) depending on the oxygen partial pressure during deposition. The microstrip line with characteristic impedance of $50\Omega$ was used for the measurement of noise absorption by the Sn-O films. The reflection parameter $(S_{11})$ increased with a decrease of surface resistance due to an impedance mismatch at the boundary between the film and the microstrip line. Meanwhile, the transmission parameter $(S_{21})$ diminished with a decrease of surface resistance resulting from an Ohmic loss of the Sn-O films. The maximum noise absorption predicted at an optimum surface resistance of the Sn-O films was about $150{\Omega}$. For this film, greater power absorption is predicted in the lower frequency region (about 70% at 1 GHz) than in conventional magnetic sheets of high magnetic loss, indicating that Ohmic loss is the predominant loss parameter for the conduction noise absorption in the low frequency band.