• Journal of the Korean Society for Railway
• /
• v.13 no.1
• /
• pp.71-77
• /
• 2010

It is increasing annually that the cost for bridge Maintenance Repair & Rehabilitation (MR&R) in developed countries. Based on Intelligent Technology, Bridge Management System (BMS) is developed for optimization of Life Cycle Cost (LCC) and reliability to predict long-term bridge deteriorations. However, such data are very limited amongst all the known bridge agencies, making it difficult to reliably predict future structural performances. To alleviate this problem, an Artificial Neural Network (ANN) based Backward Prediction Model (BPM) for generating missing historical condition ratings has been developed. Its reliability has been verified using existing condition ratings from the Maryland Department of Transportation, USA. The function of the BPM is to establish the correlations between the known condition ratings and such non-bridge factors as climate and traffic volumes, which can then be used to obtain the bridge condition ratings of the missing years. Since the non-bridge factors used in the BPM can influence the variation of the bridge condition ratings, well-selected non-bridge factors are critical for the BPM to function effectively based on the minimized discrepancy rate between the BPM prediction result and existing data (deck; 6.68%, superstructure; 6.61%, substructure; 7.52%). This research is on the generation of usable historical data using Artificial Intelligence techniques to reliably predict future bridge deterioration. The outcomes (Long-term Bridge deterioration Prediction) will help bridge authorities to effectively plan maintenance strategies for obtaining the maximum benefit with limited funds.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.3 s.151
• /
• pp.481-486
• /
• 2006

There are attempts to utilize Hanji for apparel material, but, the reason that the strength and durability of Hanji decrease to a great extent in the wet condition, restricts the usability of Hanji. In order to improve the resistance against water, Hanji was treated with silicone type water repellent agents. The treatment was carried out by conventional pad-dry-cure method. The optimum treatment condition was obtained by varying the concentration of repellent agent, curing temperature and time. Water repellency was tested by spray rating method. Wet and dry tensile strength, tearing resistance and abrasion resistance were examined after the treatment. Flexural stiffness and wrinkle recovery angles of hanji were also measured. In result, the optimum condition of treatment was at resin concentration of 40g/l, catalyst concentration of 20g/l(half of resin concentration), curing temperature of 160$^{circ}C$, curing time of 120 sec. Flexural stiffness of Hanji was hardly increased and wrinkle recovery angle of Hanji was improved a little by resin treatment. After the treatment, in dry condition, tensile strength and tearing resistance were little changed but abrasion resistance was improved. In wet condition, tensile strength, tearing strength and abrasion resistance were improved.

• Tunnel and Underground Space
• /
• v.15 no.1 s.54
• /
• pp.39-46
• /
• 2005

The RMR ratings, one by horizontal pre-boring in a tunnel and another by tunnel face mapping, are compared at the fault zone in a tunnel. Generally. the horizontal pre-borings were so effective as to forecast reasonably the supporting patterns after tunnel excavation. But the maximum difference in RMR ratings estimated by two methods was about 50 at a certain section of a tunnel. The differences were analyzed on each parameter of the RMR system: the rating differences were 24 in the condition of discontinuities, 15 in the RQD and 13 in the uniaxial compressive strength of rock. To minimize the gap between RMR by pre-borings and by face mappings, it is necessary to select the horizontal pre-boring location where tunnel stability could be critical and to evaluate in detail the sub-parameters of the condition of discontinuities.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.3
• /
• pp.201-208
• /
• 2002

The machine tool which operates by hand is replacing by CNC machine tool to improve the quality of the product and the productivity in modem mechanic industry. The precision of machine part is influenced greatly the surface roughness by cutting condition of machine tool. So this study was performed to examine the aluminium surface roughness of section according to change of strength rating, nose radius, cutting speed, using live center. The results of this study are as follows; 1. In the case of 56mm diameter of test piece(length is below triple of diameter), whether establish the live center or not, doesn't influence to the surface roughness, and it is possible to make product without the live center. 2. The average surface roughness of 42mm diameter(length is quadruple of diameter) is similar to the 56mm diameter in the cutting condition of nose radius 0.8mm and cutting speed 140mm/min, but there are increases and differences in other cutting conditions. 3. In the case of test piece length more 70m/min(140m/mm) and nose radius improved greatly using the live center. 4. In the case of test piece length is quintuple of diameter, the nose radius must choose big tool and increase the cutting speed in preference live center establishment availability to improve that is surface roughness. Conclusively, if aluminum test piece length is fewer than triple of diameter, can process without establishing live center. If aluminum test piece length is more than quintuple of diameter, cutting conditions to improve surface roughness are (1) cutting speed (2) nose radius (3) whether the live center uses or not.

• Journal of Korean Academy of Nursing
• /
• v.14 no.1
• /
• pp.1-20
• /
• 1984

This study was attempted to evaluate and explain the correlation between stress and utilization of Dispensary, Frequency of absence, Frequency of accident as the health condition of bluecollared workers. The subjects for this study were 260 workers selected conveniently from 360 workers working at one chemical manufacturer located in Seoul. The dataas measure the Stress was collected through SRRS (The Social Readjustment Rating Scale) which is developed by Holmes ＆ Rahe (1976) from 27th July to 10th August, 1983. The data of Utilization of Dispensary and Frequency of Accident were brought out from the record of Dispensary during past 8 months. The Frequency of Abscence from January to August were collected through diligence and indolence cards of each department. All collected data were analysed based on the SPSS (Statistical Package for the Social Science) program. The results of the study are as follows: 1. The average of Utilization of Dispensary was 7.4, Frequency of abscence 14.6, frequency of Accident 0.4. 2. The average score of Stress was 134 (minimum : 0, maximum : 593, Standard deviation : 109. 3) It can be considered as a slight stressed group by the requlations of Holmes and Rahe. 3. According to the analysed results of correlation between Stress and the Utilization of Dispensary, Frequency of Absence, frequency of Accident, the Utilization of dispensary and stress were significantly related (r= .1955, p<.001), the Frequency of Absence (r=.0284, p >, 05), and the Frequency of Absence (r=.0284, p>.05), and the Frequency of Accident (r= .0831, p>.05) were not significantly related with Stress. 4. In the relation between general characters of subjects and the Utilization of Dispensary, 20 to 25 aged group, women, single, christian, lent-house dwelling, 1 to 5 years employed group used at a high ratio. 5. In the relation between general character of subjects and the Frequency of Absence, men, 51 to 55 aged group, 21 to 25 years employed group indicated high Frequency, and other char-noters were not significantly related. 6. In the relation between general characters of subjects and the Frequency of Accident, women. single, 20 to 25 aged group, catholic, lent-house dwelling, below 1 year employed group showed high frequency. 7. Stress showed a significant difference only with a religion. Catholic group represented mode-rate stressed scored 209.67, and not significantly related with other general characters.

• Journal of the Korea Convergence Society
• /
• v.10 no.12
• /
• pp.109-115
• /
• 2019

This study was conducted to identify the relationship among the cognitive function of the elderly with dementia in the nursing home and the oral health condition and pathogenic microorganisms in the mouth. Data was collected for a month in February 2019 for 30 people through a non-probable sampling method due to the special nature of dementia elderly people aged 70 years or older, living in nursing homes in Daegu. Technical statistics, ANOVA, and Pearson's correlation coefficient were analyzed using the SPSS window ver. 21.0 program. According to the study, the lower the rating of long - term care classification in nursing homes, the more the number of high-risk oral pathogens, and the more the number of existing permanent teeth, the more the number of microbes in the mouth. However, there was no significant difference in cognitive function. Therefore, it is suggested that oral health care, an elderly dementia people in nursing homes, should have different management methods depending on the oral environment, and also professional managers should be able to manage oral health condition for actual care.

• Journal of International Academy of Physical Therapy Research
• /
• v.11 no.2
• /
• pp.2052-2059
• /
• 2020

Background: Kinesiology taping (KT) is a method that helps immediately increase muscle activation, strength and joint stability by being attached to various skeletal muscles and structures of the body. Objectives: To investigate the effect of KT applied below the hyolaryngeal complex on the movement of the hyolaryngeal complex during swallowing in patients with dysphagia after stroke. Design: One-group, pre-post design. Methods: Twenty individuals with dysphagia after stroke participated in this study. KT was applied to the sternum and both clavicles from the hyolaryngeal complex. We analyzed the motion of the hyolaryngeal complex during swallowing with and placebo KT and KT using the Image-J software with videofluoroscopic swallowing study. In addition, a 0-to-10 numerical rating self-report scale was used to check the required effort and resistance felt during swallowing. Results: KT condition showed that the anterior and superior movement of the hyoid bone during swallowing was significantly lower than placebo KT (P<.05, all). Also, KT condition showed that the anterior and superior movement of the larynx during swallowing was significantly lower than placebo KT (P<.05, all). In result of statistical comparison between KT group and placebo KT group, the KT group showed significantly higher self-report scale score than the placebo KT group in terms of two category; the required effort and resistance felt (P<.05, all). Conclusion: This study demonstrated that KT applied below the hyolaryngeal complex inhibits the anterior and superior movement of hyoid bone and larynx during swallowing of patients with dysphagia after stroke.

• Proceedings of the KIEE Conference
• /
• 2008.04a
• /
• pp.215-216
• /
• 2008

This paper is proposed a approximation control method(ACM) for the maximum power of a photovoltaic system. It is designed for power systems application and utilities. The proposed Maximum Power Point Tracking(MPPT) control has the advantage to provide a new simple way to approximate the optimal or rated voltage, the optimal or rated current and maximum power rating produced by a solar panel and the photovoltaic inverter. And this straightforward method has the advantage that Pmax and $V_{op}$ can be approximated using the same variable as the dynamic model without using complicate approximations or Taylor series. This paper is proposed MPPT using AMC using weather condition of domestic moderate program technique. This paper is proposed the experimental results to verify the effectiveness of the new methods.

• KEPCO Journal on Electric Power and Energy
• /
• v.2 no.3
• /
• pp.403-407
• /
• 2016

In general, drum-type boilers are designed for base load duty and applied under constant pressure operation mode. Recently, however conditions often occur that even drum-type boilers have to operate at partial load conditions. A feasibility study on adopting the sliding pressure operation for drum-type boiler was conducted, and corresponding performance changes and effects on the equipment were analyzed by utilizing a process simulation model. As a result, the conclusion was reached that drum type boilers are able to adopt the sliding pressure operation and can improve of net efficiency at part load operation in spite of the Rankine cycle efficiency reduction due to the decreases in main steam pressure. Because of thank to improvement of high pressure turbine stage-1 internal efficiency and power savings of boiler feed water pump. The sliding pressure operation is advantageous in terms of stress level relief for boiler tube as well as maintaining the rating steam temperature at part load condition. However, cautions are required because the drum boilers have poor dynamic response characteristics which may get worse during the sliding pressure operation.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.430-433
• /
• 2003

IGBTS are widely used for the industrial inverters in the mid power range at low voltage (440V$\~$660V) application. Advantageous features of the device are simple gate drive and high speed switching capability. Due to these advantages the application of IGBTS is enlarging into the high power application. However, to increase the power handling capacity at lower input voltage level, the current rating in each bridge arm must be enlarged. Therefore the parallel operation of IGBT devices is essentially needed. This paper describes the feasible parallel structures of the power circuit for the mid & the high power inverters and introduces the important design condition for the parallel operation of IGBT devices. To verify feasibility of the IGBT parallel operation, the feature of several IGBT devices (EUPEC, SEMIKRON's IGBT) are investigated and the power stacks are implemented and tested with these devices. The experimental results show the good characteristics for the parallel operation of IGBTS.