• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.9
• /
• pp.624-629
• /
• 2013

The relation between performance maintenance conditions and those cost efficiency was studied to choose an optimum operating condition in the seawater desalination pretreatment system. A hollow fiber microfiltration module, which was developed with domestic technology, was tested with the various operating conditions such as chemically enhanced backwash cycles and design dosages of a cleaning chemical. Transmembrane pressure was measured to investigate membrane fouling status and cleaning degree. In addition, economic analysis was performed to compare water production costs by the operation condition. As a result, The operation mode III, chemically enhanced backwash at once a day with 100 mg/L of sodium hypochlorite (NaOCl) was selected. The concurrent evaluation between membrane filtration performance and its economic analysis will be suitable to choose an efficient optimum condition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.6
• /
• pp.1170-1174
• /
• 2009

Two frequency-reconfigurable antennas have been designed and combined in a space with limited volume, i.e., 40mm ${\times}$ 20mm ${\times}$ 6mm. Each antenna can be reconfigured to operate at different frequency bands depending on the state of an embedded switch, which is implemented using a PIN diode. The first antenna can be switched between 0.82GHz ${\sim}$ 0.96GHz band (GSM/ CDMA) and 1.7GHz ${\sim}$ 2.17GHz band (DCS/ PCS/ WCDMA), which are cellular bands. The second antenna can be switched between 3.4GHz ${\sim}$ 3.6GHz band (mWiMax) and 2.3GHz ${\sim}$ 2.5GHz, 5.15GHz ${\sim}$ 5.35GHz bands (WiBro/ WLAN 11a/b/g/n), which are connectivity bands. The proposed combined antenna operates both over cellular bands and connectivity bands concurrently. The choice of the operation bands is made independently by the states of the two switches.

• Archives of design research
• /
• v.17 no.1
• /
• pp.49-62
• /
• 2004

Due to the recent surge of wireless Internet and concurrent development of the end user terminal devices having standardized graphical user interface(GUI) and unified operation mechanism for better interactivity in information representation and ease of use, various efforts on the improvement of GUI is widely recognized as one of the key factors that will usher in the next stages of the wireless Internet for the users. Especially, improved usability along with unique visual effect are considered to be the key elements for GUI considering the rapid improvement of the resolution and color on the end user handset devices; thus, the study and research on the subject of GUI is expected to increase along with the wireless Internet using smart phones. User interface of the wires Internet end user handsets will have a definite and significant effect on the user interaction as well as productivity. Domestically, wireless Internet service providers and GUI design companies are making various efforts in producing a common GUI models for standardized operation scheme and improved graphical display capabilities of the hand phones, PDAs and smart phones. In the study, Nokia 3650 model and Microsoft Orange SPV model were chosen as test devices for usability comparison and data collection to collect directional benchmark data in developing next generation smart phone user interface integrating PDAs and phones. The mail purpose of this study is to achieve the most efficient user accessibility to WAP menu through intensive focus on developing WIPI WAP menu having most effective usability for the users in their twenties and thirties. The result of this study can also be used as the base research materials for WAP service development, VM browser development and PDA browser development. The result of this study along with the evaluation model is expected to provide effective analysis materials on the subject of user interface to the developers of the wireless Internet user devices, GUI designers and service planners while short listing key factors to consider in developing smart phones therefore serving as the GUI guideline of WIPI phones.

• Journal of Trauma and Injury
• /
• v.23 no.1
• /
• pp.6-15
• /
• 2010

Purpose: Trauma is one of the leading causes of death, especially among young people. Life-threatening conditions are very common in multiple-traumatized patients due to concurrent multi-organ injuries. Treating such severely injured patients is time critical. However, in Korea, the transfer of severely injured patients is not uncommon due to the lack of a mature trauma care system. In developed countries, the preventable trauma death rate is very low, but the rate is still very high in Korea. This study's objective was to demonstrate the current serious state in which severely injured patients have to be transferred from a Regional Emergency Medical Center even though it actually serves as a trauma center. Methods: Ajou University Medical Center is a tertiary hospital that serves as a trauma center in Gyeonggido. The medical records at Ajou University Medical Center for a 1-year period from January 1, 2008, to December 31, 2008, were retrospectively reviewed. A severely injured patient was defined as a patient who showed more than 15 point on the ISS (injury severity score) scale. We investigated the clinical characteristics of such patients and the causes of transfer. Results: Out of 81,718 patients who visited the Regional Emergency Medical Center, 19,731 (24.1%) were injured patients. Among them, 108 severely-injured patients were transferred from one Regional Emergency Medical Center to other hospitals. The male-to-female ratio was about 3.5:1, and the mean ISS was 23.08. The most common mechanism of injury was traffic accidents (41.7%). A major cause of transfer was the shortage of intensive care units (44.4%); another was for emergent operation (27.8%). Most of the hospitals that received the severely-injured patients were secondary hospitals (86.1%). Conclusion: Although the Regional Emergency Medical Center played a role as a trauma center, actually, severely-injured patients had to be transferred to other hospitals for several reasons. Most reasons were related with the deficiencies in the trauma care system. If a mature trauma care system is well-organized, the numbers of transfer of severely injured patients will be reduced significantly.

• Journal of Veterinary Clinics
• /
• v.22 no.4
• /
• pp.396-400
• /
• 2005

A 13-year old, female Maltese dog was presented due to a five-month history of episodic syncope. A diagnosis of sick sinus syndrome (SSS) with mitral valve endocardiosis (MVE) was made based on history takings, physical and cardiac examination, complete blood count (CBC), serum chemistry profiles, radiography, electrocardiography (ECG), atropine response test, hormonal assay, and echocardiography. In this case, SSS was definitely diagnosed by evaluation of ECG recording following atropine administration. Clinical signs were improved with medical management of theophylline (THEOLAN, KunWha Pharm, Seoul, Korea, 20 mg/kg, PO, BID). After 10 more month survival, the dog, died of respiratory distress and shock during the operation of abdominal mass removal in local animal hospital. Unfortunately, we were not able to perform necropsy after death due to owner's decline. This case demonstrates that theophylline can be used in management oF dog with SSS.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.12
• /
• pp.543-548
• /
• 2017

In recent years, the importance of the safety of medical device software has been emphasized because of the function and role of the software among components of the medical device, and because the operation of the medical device software is directly related to the life and safety of the user. To this end, various standards have been set up that provide activities that can effectively ensure the safety of medical devices and provide their respective requirements. The activities that standards provide to ensure the safety of medical device software are largely divided into the development life cycle of medical device software and the risk management process. These two activities should be concurrent with the development process, but there is a limitation that the risk management requirements to be performed at each stage of the medical device software development life cycle are not classified. As a result, developers must analyze the association of standards directly to develop risk management activities during the development of medical devices. Therefore, in this paper, we analyze the relationship between medical device software development life cycle and risk management process, and extract risk management requirement items. It enables efficient and systematic risk management during the development of medical device software by mapping the extracted risk management requirement items to the development life cycle based on the analyzed associations.

• Proceedings of the Safety Management and Science Conference
• /
• 2011.04a
• /
• pp.731-746
• /
• 2011

The successful and sustainable growth of SMEs depends on their ability of strengthen their competitiveness in quality and cost and service more than anything else as a fundamental of operation. Among these key competitive factors of SMEs, quality is the most critical factor in manufacturing business fields. Because quality strongly influence cost and service performance on this manufacturing business field. There are many different ways to improve the quality performance but it needs proper management decision to choose the best way what can maximize outputs with minimum inputs. And it needs effective measurement methods and some indicators to analysis the quality performance properly. The quality cost is one of the simplest key indicators to measure the quality performance and the effectiveness of quality related management decisions. The major purpose of this study is to diagnose the categorized current level of actual quality cost of local SMEs to maximize their quality management effectiveness through comparing their level with others what's expressed in early studies. In this study, through survey on local SMEs, we found that their average annual quality cost ratio versus turnover - Total amount of annual quality cost divided by annual turnover - is around 3.69% excluded some SME's performances what have different quality control measures with others. And we found some results what corresponded with the early studies on the correlations between those categorized quality costs factors and some discrepancies between some of the literature model and the early case study results as follows. There were negative correlations between the Prevention costs and the External failure costs, and the Appraisal costs and the External failure costs, and there was positive correlation between the Appraisal costs and Internal failure costs same as early studies. But, we couldn't found any strong negative correlations between the Cost of control - Preventive costs & Appraisal costs - and the Cost of Failure of control - Internal & External failure costs -. It reveals not only the lack of effectiveness on their preventive or appraisal activities but also it can reveal there were so many effective ways to prevent the failure costs properly such as some innovative investment on Factory automation includes Error Proofing and more preventive actions to improve the effectiveness of the typical management methods likes CE (Concurrent Engineering), APQP (Advanced Product Quality Planning), FMEA (Failure Mode & Effect Analysis) etc.

• The KIPS Transactions:PartC
• /
• v.13C no.7 s.110
• /
• pp.821-830
• /
• 2006

As internet worms are spread out worldwide, the detection and filtering of worms becomes one of hot issues in the internet security. As one of implementation methods to detect worms, the Linux Netfilter kernel module can be used. Its basic operation for worm detection is a string matching where coming packet(s) on the network is/are compared with predefined worm signatures(patterns). A worm can appear in a packet or in two (or more) succeeding packets where some part of worm is in the first packet and its remaining part is in its succeeding packet(s). Assuming that the maximum length of a worm pattern is less than 1024 bytes, we need to perform a string matching up to two succeeding packets of 2048 bytes. To do so, Linux Netfilter keeps the previous packet in buffer and performs matching with a combined 2048 byte string of the buffered packet and current packet. As the number of concurrent connections to be handled in the worm detection system increases, the total size of buffer (memory) increases and string matching speed becomes low In this paper, to reduce the memory buffer size and get higher speed of string matching, we propose a string matching scheme without using buffer. The proposed scheme keeps the partial matching result of the previous packet with signatures and has no buffering for previous packet. The partial matching information is used to detect a worm in the two succeeding packets. We implemented the proposed scheme by modifying the Linux Netfilter. Then we compared the modified Linux Netfilter module with the original Linux Netfilter module. Experimental results show that the proposed scheme has 25% lower memory usage and 54% higher speed compared to the original scheme.

• Journal of the Society of Disaster Information
• /
• v.14 no.4
• /
• pp.387-398
• /
• 2018

Purpose: The purpose of this study is to promote the disaster safety village establishment project that fits the characteristics of rural areas by investigating and analyzing the operation cases of contents with regard to disaster safety villages in Korea and Japan. Method: The contents of project related to disaster safety villages in Korea and Japan were classified into resident participation contents, structured contents and unstructured contents, for examining the characteristics of such contents through investigation and analysis, and the contents (draft) of disaster safety village that fitted the characteristics of rural areas were presented. Result: The contents of resident participation include basic safety education, CPR education, life experience training of evacuation shelter, evacuation training, concurrent training of farming activity and disaster activity and creating a village safety map in connection with competent authorities. The enactment of an act and an ordinance for the establishment of disaster safety village, expert dispatch system, storm and flood insurance system and funding system to raise the fund for establishing a village were presented as unstructured contents. In addition, the production of self supporting evacuation shelter, wireless evacuation announcement system, disaster prevention system for a river, emergency evacuation sign, village safety map sign and the establishment of disaster prevention park were presented as structured contents. Conclusion: The unstructured contents are the establishment of foundation for preparing laws and institutions and the structured contents should be installed by utilizing eco-friendly methods in consideration of the environments of rural areas along with securing the safety. Moreover, resident participation should utilize the contents by considering various items such as age, characteristics and environments of residents in rural villages.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.8 no.7
• /
• pp.485-496
• /
• 2018

In this paper, the smoke behavior in an underground station on operation of the fans in the ventiliation of the station was measured by the experimental method when the fire occurred in the underground station platform where the platfrom screen door was installed. The ventilation characteristics were compared when the ventilation system was operated and when the ventilation system was not operated when a fire occurred at the platform where the clean door was closed. To simulate the fire smoke, the smoke generated from the smoke generator was heated using a hot air fan. The transmittance was measured using a smoke density meter to quantitatively measure fire smoke. If the screen door is closed and the ventilation system of the underground station does not work, it is confirmed that if a fire occurs in the platform, smoke accumulates inside the platform, evacuating passengers is very difficult and can lead to a very dangerous situation. On the other hand, under the condition that the ventilation facility of the subway station is operated, the smoke evacuates to the outside through the ventilation facility of the underground station, and airflow is formed in the direction from the waiting room to the waiting area, so that the passenger located on the platform can safely evacuate toward the concourse. In the following paper, we will discuss the concurrent effect of tunnel ventilation through tunnel vent near the platform.