• 제목/요약/키워드: Concrete Permeable Block

검색결과 19건 처리시간 0.031초

투수 콘크리트 블록 공극률 및 투수계수 평가를 위한 표면 이미지 분석 기법 개발 (Surface Image Analysis for Evaluating Porosity and Permeability Coefficient of Permeable Concrete Block)

  • 조상범;손영환;김동근;전지훈;김태진
    • 한국농공학회논문집
    • /
    • 제65권2호
    • /
    • pp.47-57
    • /
    • 2023
  • The increase of impermeable area ratio is causing hydrologic cycle problems in urban areas and groundwater depletion in rural areas, permeable pavements are getting attention to expand permeable areas. The performance of the permeable concrete block pavement, which is part of the permeable pavement, is greatly affected by the porosity. In addition, the permeability coefficient is a major factor when designing permeable concrete block pavement. Existing porosity and permeability test methods have problems such as uneconomical or poor field applicability. The object of this study was to develop a methodology for evaluating porosity and permeability coefficient using a surface image of a permeable concrete block. Specimens are manufactured with various porosity ranges and porosity and permeability tests are performed. After surface image preprocessing, normalization and binarization methods were compared. Through this, the method with the highest correlation with the lab test result was determined. From the results, the PDR (pore determined ratio) was obtained. Simple linear regression analysis is performed with PDR and lab test results. The results showed a high correlation of R2 more than 0.8, and the errors were also low.

진동다짐시간에 따른 투수콘크리트 블록의 물리적 특성에 관한 연구 (Study on Physical Properties of Permeable Concrete Block According to Vibration Time)

  • 김황희;김춘수;강수만;선정수;박찬기
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
    • /
    • pp.303-304
    • /
    • 2010
  • 본 연구에서는 진동시간이 투수콘크리트의 성질에 미치는 영향을 검토하여 투수콘크리트 블록의 성능향상을 위한 기초자료를 제시하는데 목적을 두었다.

  • PDF

폴리머 PVA 사용에 따른 콘크리트 투수블록의 강도 특성 (Strength properties of concrete permeability blocks using polymer PVA)

  • 이원규;편수정;유병용;이상수
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2018년도 춘계 학술논문 발표대회
    • /
    • pp.29-30
    • /
    • 2018
  • Recent impervious pavements on roads and sidewalks cause rainwater to not penetrate into the ground, deplete groundwater, or flood the rivers, causing urban flood damage. In order to solve these problems, the amount of installed pitcher block is increasing, but the existing pitcher block is made with cement base and causes many problems. In the cement permeable block, the efflorescene phenomenon occurs due to the acid component, and the pore of the permeable block is clogged and the permeability is lost. As a result, the service life of the pitcher block is shortened and the replacement period is shortened. The purpose of this study is to analyze the basic properties of polymer concrete by replacing cement with polymer in order to solve the problem of cement - based concrete permeable block.

  • PDF

투수성 폴리머 블록 포장에 의한 우수 유출 저감 효과에 관한 실험적 연구 (Experimental Study on Rainfall Runoff Reduction Effects by Permeable Polymer Block Pavement)

  • 성찬용;김영익
    • 한국농공학회논문집
    • /
    • 제54권2호
    • /
    • pp.157-166
    • /
    • 2012
  • Most of the roads are paved with impermeable materials such as asphalt concrete and cement concrete, and in the event of heavy rainfall, rainwater directly flows into river through a drainage hole on the pavement surface. This large quantity of rainwater directly spilled into the river frequently leads to the flooding of urban streams, damaging lowlands and the lower reaches of a river. In recent years there has been a great deal of ongoing research concerning water permeability and drainage in pavements. Accordingly, in this research, a porous polymer concrete was developed for permeable pavement by using unsaturated polyester resin as a binder, recycled aggregate as coarse aggregate, fly ash and blast furnace slag as filler, and its physical and mechanical properties were investigated. Also, 3 types of permeable polymer block by optimum mix design were developed and rainfall runoff reduction effects by permeability pavement using permeable polymer block were analyzed based on hydraulic experimental model. The infiltration volume, infiltration ratio, runoff initial time and runoff volume in permeability pavement with permeable polymer block of $300{\times}300{\times}80$ mm were evaluated for 50, 100 and 200mm/hr rainfall intensity.

폴리머 시멘트 콘크리트의 배합조건이 투수성능과 역학적 성질에 미치는 영향 (Effect of Mix Proportions on the Permeability and Mechanical Properties of Polymer Cement Concrete)

  • 박응모;조영국;소양섭
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
    • /
    • pp.356-361
    • /
    • 1998
  • Permeable polymer cement concrete in this study is one of the invironment conscious concretes that can be applied at roads, side walks, parking lots, interlocking block and river embankment, etc. In this study, permeable polymer cement concretes using polymer dispersion(St/Ac) with water-cement ratios of 25, 30, 35 and 40%, polymer-cement ratios of 0, 5, 10, 15 and 20%, and a ratio of cement to aggregate (by weight), 1 : 3.5(about 415kg/㎥), 1 : 4.0(about 375 kg/㎥), and 1 : 4.5(about 345kg/㎥) are prepared, and tested for compressive, flexural and tensile strength, and permeability. From the test results, increase in the strengths of permeable polymer cement concrete are clearly observed with increasing polymer-cement ratio, we can obtain the maximum strengths at water-cement ratio of 35%. The optimum permeable polymer cement concrete according to application and location of work can be selected in various mix proportions.

  • PDF

코팅된 제올라이트 비드를 이용한 콘크리트 투수블록의 대기전구물질 제거율 평가 (Air Pollutant Removal Rates of Concrete Permeable Blocks Produced with Coated Zeolite Beads)

  • 박준서;양근혁
    • 한국건축시공학회지
    • /
    • 제23권2호
    • /
    • pp.153-164
    • /
    • 2023
  • 이 연구의 목적은 황산화물(SOx) 및 질소산화물(NOx)을 제거할 수 있는 소재를 코팅한 제올라이트 비드를 이용하여 제조된 콘크리트 투수블록의 대기전구물질의 제거율을 평가하는데에 있다. 대기전구물질인 SOx와 NOx를 제거하기 위해서 사용된 소재는 이산화티타늄(TiO2) 분말과 야자각 분말이며, 이 두 소재를 제올라이트 비드에 코팅하였다. 시편은 실제 공장생산라인을 이용하여 제올라이트 비드가 임베디드된 콘크리트 투수블록을 제작하였다. 실험결과 표층에서 야자각 분말로 코팅된 제올라이트 비드가 첨가된 콘크리트 투수블록의 SOx와 NOx 제거율은 각각 12.5% 및 99%로서 다른 블록보다도 우수한 성능을 발휘하였다. 또한, 휨 강도 및 미끄럼저항성은 각각 5.3MPa 및 65BPN 이상으로 KS F 4419 및 KS F 4561에서 제시된 값을 만족하였다. 반면, 투수계수는 서울특별시의 투수블록 포장 설계, 시공 및 유지관리 기준으로 협잡물 오염 전후에 각각 3 및 4등급으로 낮은 투수성을 보였다. 결과적으로 표층에서 야자각 분말로 코팅된 제올라이트 비드의 첨가는 충분한 휨강도 및 미끄럼저항성을 확보하면서 자외선에 관계없이 SOx와 NOx를 동시에 제거할 수 있지만, 투수성이 낮으므로 이에 대한 보완이 필요하다.

재생 합성수지 투수블록의 표면온도 저감효과에 관한 실험적 연구 (Experimental Study on Reducing Effect for Surface Temperature of Recycled Synthetic-Resin Permeable Block)

  • 이철희;이아름;신은철;유병현
    • 한국지반신소재학회논문집
    • /
    • 제18권1호
    • /
    • pp.79-89
    • /
    • 2019
  • 본 연구는 기존의 콘크리트 투수블록이 아닌 재활용 합성수지를 활용하여 제작된 투수블록의 열섬현상 완화의 기능성 측면인 표면온도의 저감효과를 확인하고자 야외계측과 실내실험을 진행하였다. 야외계측은 건조한 상태와 습윤상태를 고려하여 3일 동안 계측하였고, 실내실험은 건조 조건, 강우 모사 조건, 표층 습윤 조건 등으로 구분하여 온도의 변화와 실험 후 함수율의 증발비율을 확인하였다. 야외계측 결과, 가뭄이 지속되거나 일정수준의 수분이 표층에 없는 건조한 상태에서는 수분의 증발에 의한 기화잠열로 냉각효과가 발휘되기 보다는 투수블록 표면의 알베도에 의한 차이로 표면의 온도가 감소하는 것을 확인하였다. 실내실험 결과, 재생 합성수지 투수블록(RS 투수블록)은 콘크리트 투수블록보다 건조한 상태일때는 더 높은 표면온도를 기록하였으나 강우 모사조건에서는 공극내 수분의 증발이 모세관력에 의해 지속적으로 유지되어 더 높은 온도 저감율 보이는 것으로 나타났다. 실내실험 후 증발율을 측정한 결과 수분의 증발율이 높을수록 온도의 저감효과는 증가하는 것을 확인하였다. 이 결과를 바탕으로 증발율과 온도의 저감율에 대한 상관관계식을 도출하였다.

슬러지 투입 및 휠트랙킹 시험을 이용한 블록 포장의 기능적 투수평가 (Functional Drainage Evaluation of Block Paving through the Usage of Sludge and Wheel Tracking Test)

  • 이상염;정훈희;문성호;박대근;박경민
    • 한국도로학회논문집
    • /
    • 제13권3호
    • /
    • pp.31-38
    • /
    • 2011
  • 주된 도시들의 불투수성 포장화에 따른 현상으로 토양의 사막화를 일으키고 있으며, 나아가, 도시 온난화 현상을 발생시켜 도시지역의 평균 온도를 올리는 원인이 되고 있다. 이로 인해 우수가 투수성 토양에 흡수되거나 잔류되어야 하는 양이 줄어듦에 따라 자주 도심지내에서 범람이 되는 현상을 보여주고 있다. 결국은 우수시스템이 제대로 작동하지 않고 침식이 발생하고 있다. 투수성 포장시스템과 관련해서는 블록 포장이 여러 군데서 수년 동안 사용되어 왔다. 또한 투수성 블록 포장은 전통적으로 사용된 아스팔트 포장 및 콘크리트 포장에 비해 다양한 형태로 사용될 수 있는 장점과 더불어 타 포장보다 미적으로 낳은 면을 보여 주고 있다. 따라서 도로의 현장 조건을 모사하기 위해 본 연구에서는 실험용 슬러지 및 휠 트래킹 장비를 이용한 블록 포장의 기능적인 투수성 평가를 실시하였다.

굴패각 및 고로슬래그 산업부산물을 재활용한 콘크리트 투수블록의 제조에 대한 실험적 연구 (An Experimental Study on Manufacturing Permeable Concrete Blocks from Recycled Industrial By-Products of Oyster Shell and Blast Furnace Slag)

  • 어석홍;허원석;하상훈;이창열
    • 한국산업융합학회 논문집
    • /
    • 제26권6_2호
    • /
    • pp.1135-1144
    • /
    • 2023
  • In this paper, bending strength and permeability tests were conducted on concrete permeable blocks manufactured by recycling industrial by-products of oyster shell and blast furnace slag to measure and compare bending strength and permeability coefficient, and present experimental research results. To this end, a total of 54 specimens with a size of 200x200x60mm for surface layer and base layer were manufactured, and bending strength and permeability test were carried ourt accoridng to KS F 4419. Eighteen types of mixing designs were implemented by varying the mixing and replacement rates of oyster shells and blast furnace slag. As a result of the experiment, the higher the mixing ratio of oyster shell, the lower the bending strength and the permeability coefficient. Thereafter, a total of three permeable blocks with dimensions of 200x200x60mm were manufactured and subjected to bending strength and permeability tests according to KS F 4419. As a result of the test, the bending strength satisfies the standard of KS F 4419, and the permeability coefficient is 12 times higher than the standard of KS F 4419. It seems that the proper mixing of oyster shells and blast furnace slag increases the amount of air, and further research on durability and economic feasibility of materials used to manufacture permeable blocks is required.

무시멘트 결합재를 사용한 콘크리트 보도블록의 특성 (Properties of Concrete Precast Pavers using Non-Cement Binders)

  • 이원규;조은석;이상수;송하영
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2018년도 추계 학술논문 발표대회
    • /
    • pp.35-36
    • /
    • 2018
  • Korea has many problems due to the asphalt pavement or impermeable pavement. Many methods are being implemented to improve water circulation. Among them, permeable packaging materials are used. However, existing permeable packaging materials have a problem of causing efflorescence and clogging the pores. The pores of the permeable packing material are clogged and the permeability is lost. This leads to economic problems and product problems. The purpose of this study was to develop a block to prevent efflorescence.

  • PDF