• Journal of Korean Society on Water Environment
• /
• v.26 no.4
• /
• pp.673-680
• /
• 2010

Environmental factors and phytoplankton community in Lake Doam were monthly investigated at 3 stations from April 2009 to November 2009. During the study period, the concentrated rainfalls occurred at between July and August and then the TP and turbidity were sharply increased in in-lake. A total of 91 phytoplankton species was classified and these were consisted of 38 Bacillariophyceae, 35 Chlorophyceae, 10 Cyanophyceae, and 8 other species. Bacillariophyceae and Chlorophyceae were dominated during the seasonal succession of phytoplankton community, especially summer season. Bacillariophyceae was dominated from spring season to summer season and Chlorophyceae was dominated at summer season and autumn season. However, the dominance of Cyanophyceae generally developed at summer season in eutrophic water was not observed. From the analysis of correlation coefficient between environmental factors and phytoplankton cell number, we confirmed that there was a negative correlation between turbidity and cyanobacteria cell number (P<0.01). This result indicated that turbid water acts as the inhibitor of the cyanobacteria growth than other phytoplankton community.

• Journal of Embryo Transfer
• /
• v.5 no.1
• /
• pp.1-20
• /
• 1990

Follicular atresia is a universal and characteristic phenomenon of both non-mammalian and mammalian vertebrates. Generally it is estimated that greater than 99% of follicles become atretic in higher domestic animals and human. The number of selected follicles developing to the preovulatory stage are thus fewer. Follicles can become atretic at any stage of development. The previous studies emphasized on descriptive and retrospect aspects of a limited population of the fully grown preovulatory follicle. The main efforts in ovarian physilogical researches are focused on follicular development culminating in ovulation but recent advances have resulted in a better understanding of atresia. Nowadays, recent studies are concentrated on the induction of atresia in a selected population of follicles and of the associated cellular, endocrine, biochemical and molecular changes. The factors initiating atresia and follicle selections are worthy of investigations. Another intriguing question is whether one can predict when a follicle will become atretic, i.e., what biochemical markers indicate that a follicle is destined for atresia. It is generally agreed that atretic process may vary even in antral follicles at different stages of their differentiations and among species. The dicisive factors are follicular responsiveness and the hormonal milieu. Some generalizations can be made on the basis of experimental induction of atresia. Alteration of the pattern of follicular steroid production is associated with the initiation stage of atretic process. Atresia appears to be a process unfolding gradually and affecting progressively in increasing number of functions and components of the follicle. The oocyte may be the latest to be afflicted in the atretic process. The high steroidogenic activity of atretic follicles lends support to the notion that atresia is not necessarily a degenerative process and that atretic follicles may play an essential role in ovarian physiology. The simultaneous occurence of growth and atretic processes may render the search for regulatory mechanisms involved in atresia difficult extremely. The questions such as how follicles are selected to undergo ovulation rather than atresia or what the mechanism of atresia is remain unanswered. However, the factors regulating or modifying ovarian hormonal milieu for the initiation of follicular growth and maturation or of atresia are being elucidated.

• Journal of Mechanical Science and Technology
• /
• v.17 no.6
• /
• pp.796-804
• /
• 2003

The use of fracture mechanics has traditionally concentrated on crack growth under an opening mechanism. However, many service failures occur from cracks subjected to mixed-mode loading. Hence, it is necessary to evaluate the fatigue behavior under mixed-mode loading. Under mixed-mode loading, not only the fatigue crack propagation rate is of importance, but also the crack propagation direction. In modified range 0.3$\leq$a/W$\leq$0.5, the stress intensity factors (SIFs) of mode I and mode II for the compact tension shear (CTS) specimen were calculated by using elastic finite element analysis. The propagation behavior of the fatigue cracks of cold rolled stainless steels (STS304) under mixed-mode conditions was evaluated by using K$\_$I/ and $_{4}$ (SIFs of mode I and mode II). The maximum tangential stress (MTS) criterion and stress intensity factor were applied to predict the crack propagation direction and the propagation behavior of fatigue cracks.

• Journal of Mechanical Science and Technology
• /
• v.20 no.9
• /
• pp.1428-1435
• /
• 2006

A slightly curved crack with an eigenstrain is considered. Solutions for a slightly curved crack in a linear isotropic material under asymptotic loading as well as for a slightly curved crack in a linear isotropic material with a concentrated force are obtained from perturbation analyses, which are accurate to the first order of the parameter representing the non-straightness. Stress intensity factors for a slightly curved crack with an eigenstrain are obtained from the perturbation solutions by using a body force analogy. Particular attention is given to the crack path stability under mode I loading. A new parameter of crack path stability is proposed for a crack with an eigenstrain. The path stability of a crack with steady state growth in a transforming material and a ferroelectric material is examined.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.3
• /
• pp.113-120
• /
• 2011

Precipitated calcium carbonate(PCC), particularly calcite crystal, is extensively used as a pigment, filler or extender in various industries such as paper, paint, textile, detergents, adhesives, rubber and plastics, food, cosmetics, and biomaterials. PCC is conventionally produced through the gas-liquid carbonation process, which consists on bubbling gaseous $CO_2$ through a concentrated calcium hydroxide slurry. This study is aimed to find some factors for controlling the morphology of engineered PCC in lab-scaled mixing batch. The experimental designs were based on temperature variables, $Ca(OH)_2$ concentration, $CO_2$ flow rate, and electrical conductivity. The model of engineered PCC morphology was finally controlled by adjustment of electrical conductivity(6.0~7.0 mS/cm) and $Ca(OH)_2$ concentration(10 g/L). Orthorhombic calcite crystals were mostly created at high concentration and electrical conductivity conditions because the increased ratio of $Ca^{2+}$ and $CO{_3}^{2-}$ ions affects the growth rate of orthorhombic faces. Excess calcium spices were contributed to the growth of faces in calcium carbonate crystal, and the non-stoichiometric reaction was occurred between $Ca^{2+}$ and $CO{_3}^{2-}$ ions during carbonation process.

• ALGAE
• /
• v.32 no.4
• /
• pp.349-357
• /
• 2017

Korean mariculture Undaria pinnatifida was collected during the months of January, February, March, and December of 2010, as well as from January of 2011 to investigate the changes in the carbon and nitrogen stable isotope ratios (${\delta}^{13}C$ and ${\delta}^{15}N$) and heavy metal with respect to it growth and to identify the factors that influence such changes. The blades of U. pinnatifida showed ${\delta}^{13}C$ and ${\delta}^{15}N$ in the range (mean) of -13.11 to -19.42‰ (-16.93‰) and 2.99 to 7.57‰ (4.71‰), respectively. Among samples with the same grow-out period, those that weighed more tended to have higher ${\delta}^{13}C$ suggesting a close association between the carbon isotope ratio and growth rate of U. pinnatifida. Indeed, we found a very high positive linear correlation between the monthly average ${\delta}^{13}C$ and the absolute growth rate in weight ($r^2=0.89$). Nitrogen isotope ratio tended to be relatively lower when nitrogen content in the blade was higher, probably due to the strengthening of isotope fractionation stemming from plenty of nitrogen in the surrounding environment. In fact, a negative linear correlation was observed with the nitrate concentration in the nearby seawaters ($r^2=0.83$). Concentrations of Cu, Cd, Pb, Cr, Hg, and Fe in the blades showed a rapid decrease in their concentration per unit weight in the more mature U. pinnatifida. Specifically, compared to adult samples, Cu, Hg, and Pb were concentrated by 30, 55, and 73 folds, respectively, in the young blades. Therefore, U. pinnatifida tissue ${\delta}^{13}C$ is as an indirect indicator of its growth rate, while ${\delta}^{15}N$ values and heavy metal concentrations serve as tracers that reflect the environmental characteristics.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.9
• /
• pp.131-139
• /
• 2001

The use of fracture mechanics has traditionally concentrated on crack growth under an opening mechanism. However, many service failure occur from cracks subjected to mixed mode loadings. Hence, it is necessary to evaluate the fatigue behavior under mixed mode loading. Under mixed mode loading conditions, not only the fatigue crack propagation rate is of importance, but also the crack propagation direction. The mode I and II stress intensity factors of CTS specimen were calculated using elastic finite element method. The propagation behavior of the fatigue crack of the STS304 steeds under mixed mode loading condition was evacuated by using stress intensity factors $K_I$ and $K_II. The MTS criterion and effective stress intensity factor were applied to predict the crack propagation direction and the fatigue crack propagation rate.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.2
• /
• pp.112-121
• /
• 2013

Korean overseas construction has been on the rise, and exceeded the 2011 goal of $50 billion by securing $59.1 billion in orders. However, these orders were heavily concentrated in the Middle East (50%) and plant construction contracts (75%). This study suggests that, to maintain growth in foreign markets, Korea construction companies should enter into the high value-added investment development business and aggressively seek ways to diversify their regions of activity and construction types. To secure the entry of Korean construction companies into lucrative markets and better understand the competitive factors facing Korean construction concerns, a survey of the literature and focus group discussions targeting relevant experts were carried out. From those efforts, a list of 44 competitive factors crucial to entering and competing in the international investment development business was developed. Survey responses were analyzed by applying IPA. The results revealed that while Korean concerns compete well in engineering/technical capabilities, maintaining a cooperative relationship with contractors, and warranty/after sales service capabilities, their ability to obtain business information on the target country, to form private/public cooperative systems, and to build international human networks require immediate improvement.

• Journal of the Korean Geographical Society
• /
• v.46 no.4
• /
• pp.480-500
• /
• 2011

This paper aims to describe the rapid growth of the one-person households in terms of the socio-economic demographic perspectives during the period of 1995-2005 and to analyze the spatial distribution patterns based on different characteristics of one-person households. The increase in the divorce ratio in the middle-aged, the growth of unmarried people the young generation, and the increase of life expectancy in the old generation are explanatory factors for the rise and diversification of one-person households in Korea. The rapid increase of one-person households is accompanied by a diversification in their age, gender, marital status, education level. Uneven distribution of one-person households depends on their age, level of education and dwelling type. Highly educated young adults residing in their own apartment are generally concentrated in major cities, whereas senior citizen with their own single house who lives alone are mostly in rural area. One-person households of the highly educated young adults are significantly polarized in the light of their the living standards. In particular, metropolitan area or big cities are mixed with those who have their own apartment and are financially capacity and with those who rent in a detached single house. As such, one-person households have considerably heterogeneous characteristics. Therefore, each local government will face different economic and social problems based on which group of one-person households are increasing and where they are concentrated in. To this extent, the local government should have differentiated welfare policy according to its own respect.

• Korean Journal of Social Welfare
• /
• v.58 no.4
• /
• pp.313-339
• /
• 2006

The purpose of this study is to analysis empirically the socio-structural causes of working poor. This study used raw data of of Korea National Statistical Office from 1982 to 2004, and put in operation time series multiple regression analysis to use socio-economic factors of macro-economy environment, labor market, distribution system. Contrary to assertion of growth-concentrated people, economic growth rate has had significantly positive effect on the change of working poor size. In the growth period there has been trickle down effect of economic growth, but in the post-Fordism period there has not been valid circular relation. Recent introduction of the U. S. type capitalism resulted in negative phenomenon like aggravation of income distribution, deterioration of employment quality, enlargement of working poor. And there rise a question on socio-economic durability due to de-compensation on intra-institution. It is necessary to grope transition to the high road social market model - that is stable and sustainable - correspond to Korea that is stable and sustainable.