• Journal of KIISE:Information Networking
• /
• v.30 no.2
• /
• pp.179-188
• /
• 2003

Advances in wireless networking technology has engendered a new paradigm of computing, called mobile computing, in which users carrying portable devices have access to a shared infrastructure independent of their physical locations. Wireless communication has some restraints such as disconnection, low bandwidth, a variation of available bandwidth, network heterogeneity, security risk, small storage, and low power. Power adaptation routing scheme overcome the shortage of power by adjusting the output power, was proposed. Existing power saving routing algorithm has some minor effect such as seceding from shortest path to minimize the power consumption, and number of nodes that Participate in routing than optimal because it select a next node with considering only consuming power. This paper supplements the weak point in the existing power saving routing algorithm as considering the gradual approach to final destination and the number of optimal nodes that participate in routing.

• Proceedings of the KIEE Conference
• /
• 2005.11c
• /
• pp.131-135
• /
• 2005

Stabilization of electric power is the most important thing is such place as computing center having business critical equipment. However, ability to cope with electrical quality shift and power failure is very weak from UPS output side to load in those electricity system, though UPS is generally used for power stabilization. this problem can be solved by duplication of power source using newly configured UPS and small sized transfer switch even in case of UPS failure.

• Journal of Digital Convergence
• /
• v.17 no.12
• /
• pp.219-228
• /
• 2019

Thanks to the development of information technology and the vitalization of smart services, the Internet of Things (IoT) technology, in which various smart devices are connected to the network, has been continuously developed. In the legacy IoT architecture, data processing has been centralized based on cloud computing, but there are concerns about a single point of failure, end-to-end transmission delay, and security. To solve these problems, it is necessary to apply decentralized blockchain technology to the IoT. However, it is hard for the IoT devices with limited computing power to mine blocks, which consumes a great amount of computing resources. To overcome this difficulty, this paper proposes an IoT architecture based on the edge computing technology that can apply blockchain technology to IoT devices, which lack computing resources. This paper also presents an operaional procedure of blockchain in the edge computing-based IoT architecture.

• Journal of Digital Convergence
• /
• v.12 no.3
• /
• pp.237-242
• /
• 2014

Recently, wind energy is expanding to combination of computing to forecast of wind power generation as well as intelligent of wind powerturbine. Wind power is rise and fall depending on weather conditions and difficult to predict the output for efficient power production. Wind power is need to reliably linked technology in order to efficient power generation. In this paper, distributed power generation forecasts to enhance the predicted and actual power generation in order to minimize the difference between the power of distributed power short-term prediction model is designed. The proposed model for prediction of short-term combining the physical models and statistical models were produced in a physical model of the predicted value predicted by the lattice points within the branch prediction to extract the value of a physical model by applying the estimated value of a statistical model for estimating power generation final gas phase produces a predicted value. Also, the proposed model in real-time National Weather Service forecast for medium-term and real-time observations used as input data to perform the short-term prediction models.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.4
• /
• pp.38-49
• /
• 1998

A fossil power plant can be modeled by a lot of algebraic equations and differential equations. When we simulate a large, complicated fossil power plant by a computer such as workstation or PC, it takes much time until overall equations are completely calculated. Therefore, new processing systems which have high computing speed is ultimately needed for real-time or high-speed(faster than real-time) simulators. This paper presents an enhanced strategy in which high computing power can be provided by parallel processing of DSP processors with communication links. DSP system is designed for general purpose. Parallel DSP system can be easily expanded by just connecting new DSP modules to the system. General urpose DSP modules and a VME interface module was developed. New model and techniques for the task allocation are also presented which take into account the special characteristics of parallel I/O and computation. As a realistic cost function of task allocation, we suggested 'simulation period' which represents the period of simulation output intervals. Based on the development of parallel DSP system and realistic task allocation techniques, we cound achieve good efficiency of parallel processing and faster simulation speed than real-time.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.10
• /
• pp.1699-1708
• /
• 2007

The optimal power flow(OPF) problem was introduced by Carpentier in 1962 as a network constrained economic dispatch problem. Since then, the OPF problem has been intensively studied and widely used in power system operation and planning. In these days, OPF is becoming more and more important in the deregulation environment of power pool and there is an urgent need of faster solution technique for on-line application. To solve OPF problem, many heuristic optimization methods have been developed, such as Genetic Algorithm(GA), Evolutionary Programming(EP), Evolution Strategies(ES), and Particle Swarm Optimization(PSO). Especially, PSO algorithm is a newly proposed population based heuristic optimization algorithm which was inspired by the social behaviors of animals. However, population based heuristic optimization methods require higher computing time to find optimal point. This shortcoming is overcome by a straightforward parallel processing of PSO algorithm. The developed parallel PSO algorithm is implemented on a PC cluster system with 6 Intel Pentium IV 2GHz processors. The proposed approach has been tested on the IEEE 30-bus system. The results showed that computing time of parallelized PSO algorithm can be reduced by parallel processing without losing the quality of solution.

• Journal of Internet Computing and Services
• /
• v.10 no.4
• /
• pp.151-160
• /
• 2009

Wireless network solution is used in many area because of free mobility and easy of establishment. Sensors that compose wireless network need protocol that support wireless communication to share information each other. As representative protocol, we currently witnessed IPv6 protocol. However, due to the limitation of sensors's electric power and computing ability, it is inefficient that each sensors use this protocol. In this paper, we designed improved sensor circuit that can heighten energy efficiency in sensor network to solve these problem and composed algorithm that can pare down energy consumption using method to make unnecessary sensor in sleep-mode.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.3
• /
• pp.901-920
• /
• 2015

Wireless Sensor Networks (WSNs) are widely used in geographically isolated applications like military border area monitoring, battle field surveillance, forest fire detection systems, etc. Uninterrupted power supply is not possible in isolated locations and hence sensor nodes live on their own battery power. Localization of sensor nodes in isolated locations is important to identify the location of event for further actions. Existing localization algorithms consume more energy at sensor nodes for computation and communication thereby reduce the lifetime of entire WSNs. Existing approaches also suffer with less localization coverage and localization accuracy. The objective of the proposed work is to increase the lifetime of WSNs while increasing the localization coverage and localization accuracy. A novel intelligent unmanned aerial vehicle anchor node (IUAN) is proposed to reduce the communication cost at sensor nodes during localization. Further, the localization computation cost is reduced at each sensor node by the proposed intelligent arc selection (IAS) algorithm. IUANs construct the location-distance messages (LDMs) for sensor nodes deployed in isolated locations and reach the Control Station (CS). Further, the CS aggregates the LDMs from different IUANs and computes the position of sensor nodes using IAS algorithm. The life time of WSN is analyzed in this paper to prove the efficiency of the proposed localization approach. The proposed localization approach considerably extends the lifetime of WSNs, localization coverage and localization accuracy in isolated environments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.6
• /
• pp.2648-2668
• /
• 2016

Modern mobile devices are equipped with various accelerated processing units to handle computationally intensive applications; therefore, Open Computing Language (OpenCL) has been proposed to fully take advantage of the computational power in heterogeneous systems. This article introduces a parallel software decoder of Low Density Parity Check (LDPC) codes on an embedded heterogeneous platform using an OpenCL framework. The LDPC code is one of the most popular and strongest error correcting codes for mobile communication systems. Each step of LDPC decoding has different parallelization characteristics. In the proposed LDPC decoder, steps suitable for task-level parallelization are executed on the multi-core central processing unit (CPU), and steps suitable for data-level parallelization are processed by the graphics processing unit (GPU). To improve the performance of OpenCL kernels for LDPC decoding operations, explicit thread scheduling, vectorization, and effective data transfer techniques are applied. The proposed LDPC decoder achieves high performance and high power efficiency by using heterogeneous multi-core processors on a unified computing framework.

• Journal of Korea Multimedia Society
• /
• v.3 no.3
• /
• pp.320-332
• /
• 2000

Web consists of the grand virtual system which is made of all connected computers network. We can solve the huge problem which requires high quality in cost performance and powerful computing power to use a numerous idle state system on internet as process it parallel. However, we have to consider heterogeneous computing resources, accessibility, and reliability to carry out parallel system on global environment, not network but whole Internet. In this paper, We the WebImg system which has the power of web computing, and show the flexible task allocation strategy in heterogeneous hosts. Also, we evaluate its performance, moreover the proposed task allocation strategy supplies fault tolerance by controlling host situation at any time.