• 대한예방의학회:학술대회논문집
• /
• 대한예방의학회 1993년도 제45차 추계 학술대회 연제집
• /
• pp.185-186
• /
• 1993

• 전자공학회논문지B
• /
• 제33B권4호
• /
• pp.81-90
• /
• 1996

In this paper, we implemented a computerized pulse diagnosis system for the developement of pulse diagnosis algorithms and the generalization of the pulse diagnosis. The system consists of the hardware and software. The hardware detects pulse waves and inputs the waves into the computer system, while the software not only manages and analyzes the input pulse wave data but also privides the database. In order to clinically test the developed pulse diagnosis system, we applied the carotid-radial pulse diagnosis algorithm to the system. As the results, it is found that the genralizatio of the pulse diagnosis is possible.

• 산업경영시스템학회지
• /
• 제10권16호
• /
• pp.19-26
• /
• 1987

Since many small and medium sized enterprises have lack of funds to install the full scale Computer Aided Process Planning this study has been attempted to develop a part of computer generated production information system for a start. The system is programmed by DBASE III and BASIC languages for the IBM-PC competables for the sake of user's convenience. The system consisted of four major parts. The first part is a computerized work measurement system for applying WF predetermined time standards. The second part is a computerized forecasting and loading system for applying various statistical techniques. The third part is a GT scheduling system programmed by BASIC for applying heuristic scheduling method. Finally, the last part is a simulation system for GT scheduling efficiency test which is programmed by SIMAN simulation language.

• Progress in Superconductivity
• /
• 제7권1호
• /
• pp.36-40
• /
• 2005

The problem of fluctuation-induced digital errors in a rapid single flux quantum (RSFQ) circuit has been a very important issue. In this work, we calculated the bit error rate of an RSFQ switch used in superconductive arithmetic logic unit (ALU). RSFQ switch should have a very low error rate in the optimal bias. Theoretical estimates of the RSFQ error rate are on the order of $10^{-50}$ per bit operation. In this experiment, we prepared two identical circuits placed in parallel. Each circuit was composed of 10 Josephson transmission lines (JTLs) connected in series with an RSFQ switch placed in the middle of the 10 JTLs. We used a splitter to feed the same input signal to both circuits. The outputs of the two circuits were compared with an RSFQ exclusive OR (XOR) to measure the bit error rate of the RSFQ switch. By using a computerized bit-error-rate test setup, we measured the bit error rate of $2.18{\times}10^{-12}$ when the bias to the RSFQ switch was 0.398 mA that was quite off from the optimum bias of 0.6 mA.

• 한국콘텐츠학회논문지
• /
• 제13권6호
• /
• pp.339-349
• /
• 2013

뇌손상 환자들을 대상으로 한국판 간이정신상태검사(MMSE-K)와 한국형 컴퓨터 신경행동검사(KCNT)를 실시하여 관련성을 평가하고, 확정적 정상군과 치매 의심군을 구분하는데 있어서 KCNT의 유용성을 평가하기 위하여 수행되었다. 뇌손상 환자 50명 중 확정적 정상군과 치매 의심군의 KCNT 결과는 정규성 검정을 만족하여 두 군간 비교는 t 검정을, MMSE-K와 KCNT 결과간에는 이변량 상관분석을 실시하였다. 두 군의 특성은 유의한 차이가 없었으며, KCNT 결과는 두 군간 모든 항목에서 유의한 차이가 있었다(p<.05). 두 검사간 Pearson 상관계수는 단순반응시간(r=-.580), 선택반응시간(r=-.341), 글자색 맞추기(r=-.661), 숫자구분(r=-.703), 두 자리 숫자더하기(r=-.582), 세 자리 숫자더하기(r=-.610), 부호숫자 짝짓기(r=-.642), 숫자외우기(r=.807)로 유의한 상관관계가 있었다(p<.05). 이 중 단순반응시간, 두 자리 숫자더하기는 확정적 정상군과 치매 의심군에서 서로 다른 부호의 상관계수를 나타내 두 군을 구분하는 검사로 사용할 수 있을 것으로 생각되며, 제안된 KCNT 항목들을 검사 목적에 따라 선택하여 사용하면 두 군의 인지기능을 관찰하기 위한 검사로 유용하게 사용할 수 있을 것으로 생각된다.

• 대한조선학회논문집
• /
• 제49권4호
• /
• pp.296-303
• /
• 2012

The captive model test of submerged body using CPMC(Computerized Planar Motion Carriage) was carried out at the Ocean Basin of KORDI/MOERI. The target model is a submarine with general hullform. The forces and moments acting on the submerged body were measured by 6-axis waterproof gage. The oblique motion test and turning test were carried out in horizontal and vertical planes of the model. Maneuvering coefficients and derivatives were obtained from the test results. The stability indices in horizontal and vertical planes were obtained by using maneuvering derivatives. In this paper the introduction of test equipment and test results are presented.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제32권5호
• /
• pp.438-448
• /
• 2005

본 논문에서는 학습자들의 학습 특성 및 학습 능력에 따라 학습내용을 동적으로 구성하여 제공하는 적응형 교수 시스템을 제안한다. 본 논문에서 제안한 시스템은 학습 단계와 평가 단계를 연계함으로써 평가 단계에서 추정된 학습자의 능력에 따라 차기 학습 단계에서 수준별 학습내용을 동적으로 구성하여 학습자에게 제공함으로서 개인화된 교수${\cdot}$학습을 지원하고 있다. 이를 위해 먼저 학습자들의 학습 능력을 정확하게 평가할 수 있도록 문항반응이론에 의한 컴퓨터 적응적 평가를 이용하여 평가 단계를 구현하였으며, 또한 추정된 각 학습자의 능력 수준에 맞는 학습내용을 제공하기 위해 퍼지 개념을 이용하여 퍼지 수준 집합을 구성한 후 제공함으로써 학습자에 따른 수준별 학습이 가능하도록 학습 단계를 구현하였다.

• 대한치과교정학회지
• /
• 제50권6호
• /
• pp.401-406
• /
• 2020

Objective: To investigate and compare the slot sizes and parallelism of metal injection molding (MIM) and computerized numerical control (CNC) brackets. Methods: The following four MIM bracket series with 0.022-inch (in) slots were selected for investigation: Di MIM mini Twin (Ortho Organizers), Mini Diamond Roth (Ormco), Gemini MBT (3M Unitek), and Formula R Roth (Tomy). The following four CNC bracket series with 0.022-in slots were selected for investigation: Econoline MBT (Adenta), Legend mini MBT (GC Orthodontics), Crown mini MBT (Adenta), and Evolve MBT (DB Orthodontics). The slot dimensions were measured using an optical microscope (XTCam-D310M; Mitutoyo) with a resolution of 1 ㎛. The results were statistically analyzed using one-way analysis of variance and the Tukey post-hoc test with a significance level of 0.05. Results: The results indicated that all the investigated slot sizes were oversized with respect to the manufacturers' specifications (0.022 in). Among the eight bracket series, the Di MIM bracket (MIM) was the most oversized by 10.4%, whereas the Evolve bracket (CNC) was the least oversized by 2.6%. The slots in seven of the bracket series had divergent walls instead of parallel ones. The Evolve bracket alone had parallel slot walls. Conclusions: Regardless of the manufacturing method, all the slot sizes of the brackets investigated in this study were significantly oversized; most of the slot walls were nonparallel, except for those of the Evolve bracket. This study could not establish that the CNC method was more accurate than the MIM method in manufacturing bracket slots.

• Archives of Plastic Surgery
• /
• 제35권3호
• /
• pp.303-308
• /
• 2008

Purpose: The purpose of this study is to develop three-dimensional computerized anthropometry(3DCA) and to compare its reliability and accuracy 3DCA with manual anthropometry(MA) for measurement of lips and nasal deformities in unilateral cleft lips and palate(UCLP) patients. Methods: Samples were consisted of six UCLP patients whose facial plaster models were available immediately before and 3 months after the cleft lip surgery. MA of the facial plaster models was carried out using an electronic caliper. In 3DCA, three-dimensional auto-measuring program was used to digitize landmarks and to measure three-dimensional virtual facial models (3DVFM), which was generated with a laser scanner and 3D virtual modeling program. Intraclass correlation coefficients(ICC) were calculated to evaluate reliability and reproducibility of the variables in both methods, and Wilcoxon's signed rank test was done to investigate the difference in values of the same variables of facial models of each patient between two methods. Results: All ICC values were higher than 0.8, so both methods could be considered reliable. Although most variables showed statistical differences between two methods(p<0.05), differences between mean values were very small and could be considered not significant in clinical situation. Conclusion: In clinical situation, 3DCA can be an objective, reliable and accurate tool for evaluation of lips and nasal deformities in the cleft patients.

• 대한기계학회논문집
• /
• 제14권6호
• /
• pp.1576-1582
• /
• 1990

본 연구에서는 Al 2024-T3 판으로 제작된 한면 노치 시편에 여러 조건의 피로 하중을 가하여 노치면내에 형성된 미소 피로균열의 COD를 광학적 간섭현상에 기초를 둔 미소 변위측정기(Interferometric Strain/Displacement Gage`ISDG)를 개량하여 측 정하였다. 이 ISDG의 컴퓨터 조정방식을 정밀화시켜 0.02$\mu\textrm{m}$까지의 상대변위를 측정 할 수 있도록 보완하였다. 고정밀화돈 측정기로 수십 $\mu\textrm{m}$길이의 미소균열의 COD도 측 정하였고 컴류터에 저장시킴으로써 시험후 미소 피로균열에 대한 열림 특성을 분석할 수 있다. 측정된 미소 피로균열의 균열열림특성을 고찰하고 긴 균열의 열림특성과도 비교.분석 하였다.