• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제42권2호
• /
• pp.127-130
• /
• 2016

This clinical note introduces a method to assist surgeons in performing single-tooth dento-osseous osteotomy. For use in this method, a surgical guide was manufactured using computer-aided design/computer-aided manufacturing technology and was based on preoperative surgical simulation data. This method was highly conducive to successful single-tooth dento-osseous segmental osteotomy.

• 대한치과기공학회지
• /
• 제46권1호
• /
• pp.15-19
• /
• 2024

An ideal post material should have physical properties similar to those of dentin. Post materials with high elastic moduli may cause root fractures. This clinical report describes the treatment of a severely damaged tooth using a recently introduced material. Polyetherketoneketone (PEKK) is a semicrystalline high-performance thermoplastic polymer. PEKK is a promising material for custom post-and-core fabrication because of its elasticity close to that of dentin, good shock absorbance, machinability, and low cost. A laboratory scanner was used to digitize the conventional impression of a severely damaged maxillary right first molar. A custom PEKK post-and-core was designed and milled using computer-aided design and computer-aided manufacturing technology. Using the proposed technique, a custom PEKK post-and-core was fabricated accurately and human error was reduced. Restoration was luted with resin cement. Custom PEKK post-and-core restorations are a viable alternative for treating severely damaged teeth.

• 대한치과의사협회지
• /
• 제54권8호
• /
• pp.651-657
• /
• 2016

Currently with the continuous development of ceramic and cementation materials, CAD-CAM(Computer-aided design/Computer-aided manufacture) restorations are becoming increasingly popular in esthetic dentistry. Preparation design is influenced by the selected restorative material, the fabrication method, and the ability to bond the restoration. For long-lasting CAD/CAM inlay/onlay restoration, clinicians should understand the basic knowledge of CAD/CAM restoration's cavity design to obtain the fracture resistance and proper fitting margin. This article gives an overview of preparation guidelines for CAD/CAM inlay/onlay restorations.

• Computers and Concrete
• /
• 제1권1호
• /
• pp.15-30
• /
• 2004

In this study, a design process for reinforced concrete structures using the nonlinear FEM analysis is developed. Instead of using the nonlinear analysis to evaluate the required performance after design process, the nonlinear analysis is applied before designing the reinforcement arrangement inside the RC structures. An automatic reinforcement generator for computer aided reinforcement agreement is developed for this purpose. Based on a nonlinear FEM program for analyzing the reinforced concrete structure, a smart fictitious material model of steel, is proposed which can self-adjust the reinforcement to the required amount at the cracking location according to the load increment. Using this tool, the reinforcement ratio required at design load level can be decided automatically. In this paper, an example of RC beam with opening is used to verify the proposed process. Finally, a trial design process for a real size underground RC LNG tank is introduced.

• 한국생산제조학회지
• /
• 제24권2호
• /
• pp.148-154
• /
• 2015

Computer aided process planning (CAPP) keeps an important role between the design and manufacturing engineering processes. A CAPP system is a digital link between a computer aided design (CAD) model and manufacturing instructions. CAPP have been researched and applied in manufacturing filed, however, one manufacturing area where CAPP has not been extensively researched is rapid prototyping (RP). RP is a technique for creating directly a three dimensional CAD data into a physical prototype. RP enables to build physical models automatically and to use to reduce the time for the product development cycle as well as to improve the final quality of the designed product. Three-dimensional (3D) printing is one kind of RP that creates three-dimensional objects from CAD models. The paper presents a computer aided process planning system for printing medical products. 3D printing has been used to solve complex medical problems such as surgical instruments, bioengineered products, medical implants, and surgical guides.

• 대한치과보철학회지
• /
• 제57권1호
• /
• pp.57-65
• /
• 2019

Computer guided implant surgery와 computer-aided design/computer-aided manufacturing, computer guided implant surgery (CAD/CAM) 기술의 발전은 수복 기반 임플란트 치료의 완성도를 한층 더 높였으며, 3D printing을 통한 국소의치의 제작도 빈도가 늘고 있다. 본 증례는 디지털 치의학의 작업 흐름을 따라서 콘빔컴퓨터단층촬영을 통한 치료 계획 수립 및 수술용 스텐트의 제작과 그를 바탕으로 한 임플란트 식립을 하였으며, 맞춤 지대주와 보철물을 제작하였다. 그 후 전자 서베잉과 3D printing을 통한 국소의치 금속 구조물 및 최종적으로 지르코니아 온레이의 제작을 통해 전악 수복을 완성하여 기능과 심미적으로 만족스러운 결과를 얻을 수 있었다.

• International Journal of Automotive Technology
• /
• 제8권3호
• /
• pp.383-394
• /
• 2007

Due to the clutch's non-linear dynamics, time-delays, external disturbance and parameter uncertainty, the automated clutch is difficult to control precisely during the launch process or automatic mechanical transmission (AMT) vehicles. In this paper, an enhanced fuzzy sliding mode controller (EFSMC) is proposed to control the automated clutch. The sliding and global stability conditions are formulated and analyzed in terms of the Lyapunov full quadratic form. The chattering phenomenon is handled by using a saturation function to replace the pure sign function and fuzzy logic adaptation system in the control law. To meet the real-time requirement of the automated clutch, the region-wise linear technology s adopted to reduce the fuzzy rules of the EFSMC. The simulation results have shown hat the proposed controller can achieve a higher performance with minimum reaching time and smooth control actions. In addition, our data also show that the controller is effective and robust to the parametric variation and external disturbance.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.389-392
• /
• 2005

In the maskless photolithography based on the Digital Micromirror Device (DMD) by Texas Instruments Inc. (TI), the micromirror array works as a virtual photomask to write patterns directly onto Flat Panel Display (FPD) at high speed with low cost. However, it is neither simple to generate region-based patterns for the micromirror array nor easy to deliver sequences of patterns for the micromirror controller. Moreover, the quality of lithography yields the precise synchronization between generating sequence of patterns and irradiation rate off micromirrors. In this study, the region-based pattern generating system for maskless photolithography is devised. To verify salient features of devised functionalities, the prototype system is implemented and the system is evaluated with actual DMD based photolithography. The results show that proposed pattern generating method is proper and reliable. Moreover, the devised region-based pattern generating system is robust and precise enough to handle any possible user specified mandate and to achieve the quality of photolithography required by FPD manufacturer.

• Journal of Mechanical Science and Technology
• /
• 제15권2호
• /
• pp.160-171
• /
• 2001

Depending upon the method of the surface generation and the quality of the designed boundary curves, the resulting surfaces may have global or local irregularities in many cases. Thus, it would be necessary for the designer to evaluate the surface quality and to modify the surface. This is very important because the defect of the surface causes the rework of the dies, increasing cost and delivery time significantly. To simulate the reflection line test in the actual production line, a faster algorithm for generating reflection lines is presented. In this paper, among various surface interrogation methods using reflection lines, Blinn-Newell type of reflection mapping is applied to generate the reflection lines on the trimmed NURBS surfaces. The derivation of reflection lines is formulated as a surface-plane intersection problem (Jung 1994) and is solved by surface-contouring techniques. Also, for eliminating the discontinuity of reflection lines due to the configuration of reflection map, a modified reflection map is proposed. An efficient traced contouring technique is utilized for the computational efficiency and proves to be well suited for the real-time quality-assessment task.

• 대한치과보철학회지
• /
• 제55권4호
• /
• pp.436-443
• /
• 2017

과거의 computer-aided design/computer-aided manufacturing (CAD/CAM) 기술 형태는 사용자가 한 제조사의 구성요소만 사용해야 하는 폐쇄적인 시스템이었다면, 현재는 여러 제조사의 구성요소 중 사용자가 필요에 맞는 구성요소를 선택해서 사용할 수 있는 유연성을 가진 개방적인 시스템 형태로 변화하였다. 치과재료와 보철물 제작 기술의 발전에도 불구하고 의치 제작은 지난 100년 가까이 전통적인 제작방식을 따랐다. 하지만 최근 들어 기존 의치 제작의 단점을 보완하고자 CAD/CAM 제작 의치에 관한 연구가 활발히 이루어지고 있으며, 밀링이나 3D 프린팅을 이용해 상용화된 형태의 CAD/CAM 제작 의치가 이미 임상에서 쓰이고 있다. 본 증례는 3D face scan을 활용한 CAD/CAM 의치 제작의 가능성을 확인하고, CAD/CAM과 전통적인 방법으로 제작한 의치를 비교한 결과에 대해 보고하고자 한다.