• Clean Technology
• /
• v.23 no.3
• /
• pp.248-255
• /
• 2017

In dismantling factories for recycling, it is important to input actual working data to a personal computer (PC) in order to monitor the work results and related recycling rate of the inputs. This should be performed with a keyboard, a mouse, or other devices. But when a worker is working in the factory, it could be bothersome or time consuming to go to the PC. Especially, workers who works at dismantling factories have a generally low education level are scared to use a PC, which could be used as a pretext for not using the PC. In some cases, data input is performed by a worker after the day's job. In this case, it could take additional time, the worker can make more mistakes, and the data could be unreliable. In this study, we developed a man-machine interface (MMI) device using a safety helmet. A joystick-like device, pushbuttons, and a radio frequency (RF) device for wireless communication is equipped in a safety helmet. This MMI device has functions similar to a PC mouse, and it has a long communication distance. RF is used because it consumes less battery power than Bluetooth. With this MMI device, workers need not go to a PC to input data or to control the PC, and they can control the PC from a long distance. The efficiency of PCs in a factory could be increased by using the developed MMI system, and workers at the dismantling factories could have less reluctance in using the PC.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.5
• /
• pp.629-638
• /
• 2023

This study introduces an innovative approach to monitor the whereabouts of workers within indoor construction settings. While traditional modalities such as GPS and NTRIP have demonstrated efficacy for outdoor localizations, their precision dwindles in indoor environments. In response, this research advocates for the adoption of Aruco markers. Leveraging computer vision technology, these markers facilitate the quantification of the distance between a worker and the marker, subsequently pinpointing the worker's instantaneous location with heightened accuracy. The methodology's efficacy was rigorously evaluated in a real-world construction scenario. Parameters including system stability, the influence of lighting conditions, the extremity of measurable distances, and the breadth of recognition angles were methodically appraised. System stability was ascertained by maneuvering the camera at a uniform velocity, gauging its marker recognition prowess. The impact of varying luminosity on marker discernibility was scrutinized by modulating the ambient lighting. Furthermore, the camera's spatial movement ascertained both the upper threshold of distance until marker recognition waned and the maximal angle at which markers remained discernible.

• Safety and Health at Work
• /
• v.14 no.4
• /
• pp.368-374
• /
• 2023

Background: Recognizing that access to safe and healthy working conditions is a human right, the World Health Organization (WHO) calls for specific occupational safety and health (OSH) programs for health workers (HWs). The WHO health systems' building blocks, and the International Labour Organization (ILO), highlight the importance of information as part of effective systems. This study examined how OSH stakeholders access, use, and value an occupational health information system (OHIS). Methods: A cross-sectional survey of OSH stakeholders was conducted as part of a larger quasi experimental study in four teaching hospitals. The study hospitals and participants were purposefully selected and data collected using a modified questionnaire with both closed and open-ended questions. Quantitative analysis was conducted and themes identified for qualitative analysis. Ethics approval was provided by the University of Pretoria and University of British Columbia. Results: There were 71 participants comprised of hospital managers, health and safety representatives, trade unions representatives and OSH professionals. At least 42% reported poor accessibility and poor timeliness of OHIS for decision-making. Only 50% had access to computers and 27% reported poor computer skills. When existing, OHIS was poorly organized and needed upgrades, with 85% reporting the need for significant reforms. Only 45% reported use of OHIS for decision-making in their OSH role. Conclusion: Given the gap in access and utilization of information needed to protect worker's rights to a safe and healthy workplace, more attention is warranted to OHIS development and use as well as education and training in South Africa and beyond.

• International journal of advanced smart convergence
• /
• v.6 no.4
• /
• pp.50-55
• /
• 2017

Workers' demands for new applications, especially mobile applications, are increasing. Many industry analysts, researchers and corporate executives say the demand for mobile applications is becoming increasingly difficult to follow in the IT department. Gartner predicts that by 2021, the demand for mobile application development within the enterprise will increase about five times faster than IT can deliver applications. The purpose of this paper is to provide an environment where non-developers who are in charge of business development can develop apps and webs for their work. The basic concept of a new innovative App development tool, Smart Maker Authoring Tool is to develop Apps on the level using easy-to-learn Word or Excel in a computer. The main feature is that the app is developed by a non-developer worker. The coding technology is perfectly optimized to the structure and operation mechanism of the IT Infra such as hardware devices and operating system, which are the targets for implementing a desired function. Rather, it shows excellent software productivity. The most important feature of future business development is that it is developed by a non-developer worker. In this paper, we propose a no-code and low-code platform for non - developers to develop their business. In the future, we will link the IoT based Arduino system and artificial intelligent interpretation system.

• Journal of KIBIM
• /
• v.5 no.2
• /
• pp.46-54
• /
• 2015

Vision-based tracking has been proposed as a means to efficiently track a large number of construction resources operating in a congested site. In order to obtain 3D coordinates of an object, it is necessary to employ stereo-vision theories. Detecting and tracking of multiple objects require an entity matching process that finds corresponding pairs of detected entities across the two camera views. This paper proposes an efficient way of entity matching for tracking of construction workers. The proposed method basically uses epipolar geometry which represents the relationship between the two fixed cameras. Each pixel coordinate in a camera view is projected onto the other camera view as an epipolar line. The proposed method finds the matching pair of a worker entity by comparing the proximity of the all detected entities in the other view to the epipolar line. Experimental results demonstrate its suitability for automated entity matching for 3D vision-based tracking of construction workers.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.3
• /
• pp.276-284
• /
• 2009

In this paper, we develop the image transfer remote maintenance monitoring system for hand held device which can compensate defects of human mistake. The human mistakes always happen when the worker communicate information each other to check and maintenance the equipment of the power plant under bad circumstance such as small place and long distance in power plant. A worker couldn't converse with other when in noisy place like Power plant. So, we make some hand device for handy size and able to converse in noisy place. The developed system can have improvement of productivity through increasing plant operation time. And developed system is composed of advanced H/W(hard ware) system and S/W(soft ware)system. The H/W system consist of media server unit, communication equipment with hand held device, portable camera, mike and head set. The advanced s/w system consist of data base system, client pc(personal computer) real time monitoring system which has server GUI(graphic user interface) program, wireless monitoring program and wire ethernet communication program. The client GUI program is composed of total solution program as pc camera program, and phonetic conversation program etc.. We analyzed the required items and investigated applicable part in the image transfer remote maintenance monitoring system with hand held device. Also we investigated linkage of communication protocol for developed prototype, developed software tool of two-way communication and realtime recording skill of voice with image. We confirmed the efficiency by the field test in preventive maintenance of plant power.

• Journal of the Korean Society for Railway
• /
• v.10 no.2 s.39
• /
• pp.231-242
• /
• 2007

As railroad industry faces the new Renaissance era, effective and efficient maintenance methods for rolling stock operation are required with advanced railroad technology. All kinds of railroad systems such as high-speed long-distance train, metropolitan mass transit and light rail require systematic maintenance technology in order to maintain the safe railroad operation. Simulation models for regular operations of the example maintenance center are developed. In this study, standard maintenance procedures, layout, equipments, and number of workers of Siheung Metropolitan Railroad Maintenance Rolling Stock Depot are considered. The proposed simulation models are developed using simulation package ARENA. After simulation, four types of observations are analyzed. First, the bottleneck operation is identified. Second, the relationship between maintenance center size, number of workers and cycle time is analyzed. Third, the scheduling performances between PERT/CPM and Critical Chain Project Management(CCPM) are compared. Lastly, the simulation results according to worker's working coverage shows expanding the worker's coverage decreases the cycle time and increases throughput per train. However, workers are to be fully trained to do multiple skill work.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.3
• /
• pp.23-27
• /
• 2002

Ocean pollution like as oil spill and red tide have occurred considerable and executing clean-up them. Rapid prediction of polluting area is necessary that efficiency clean-up. In this study, develop the program that clean-up worker could easy predict polluted area. This paper is introduced configuration and contents of ODM(oil diffusion modelling) which constructed with GUI(Graphic User Interface) system. ODM is consisted with pre, post and main process, and constructed on window process. So, clean-up worker easy operating program and confirm the result. Studying this program, the distribution of ocean pollutant and phase of ocean movement is shown without difficulty on a computer.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.6
• /
• pp.181-193
• /
• 2008

VNC is one of popular thin client computing systems, which supports cross-platform remote control using the RFB protocol. Unfortunately, since VNC does not provide functions specially designed for collaboration, it is difficult to collaborate effectively through the remote control function of VNC. In this paper, we present the extension of the UltraVNC server and the JavaViewer client which are one of open-source VNC systems. For effective real-time collaboration, the extended VNC provides three kinds of access authorities to control the collaboration server: administrator, worker, and spectator. The administrator can control the access authorities of the users through the access control tool, newly provided in the extended JavaViewer. The workers can access the resources of the remote server, whereas the spectator cannot handle those remote resources, only monitoring the remote server. In addition, the extended VNC provides the one-click connection facility for easy connection to the collaboration server from many collaboration participants.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.2
• /
• pp.187-195
• /
• 2015

In this paper, we examined the effect of positive affect and negative affect on the life satisfaction in the workplace. Also, this study focused on an empirical test of the role of work self-efficacy and work meaningfulness in the subjective well-being of office worker. To achieve this purpose, we suggested a research model consisting of factors such as work self-efficacy, work meaningfulness, positive affect, negative affect, life satisfaction. Data was collected using the survey method, and analyzed using structural equation model. According to PLS analysis, first, lower negative affect was associated with higher life satisfaction. Secondly, work meaningfulness was a very important predictor for the subjective well-being of office worker.